SEDA :: Apache Camel

URI format

seda:someName[?options]

Where someName can be any string that uniquely identifies the endpoint within the current CamelContext.

You can append query options to the URI in the following format: ?option=value&option=value&…

Options

The SEDA component supports 9 options, which are listed below.

Name	Description	Default	Type
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
concurrentConsumers (consumer)	Sets the default number of concurrent threads processing exchanges.	1	int
defaultBlockWhenFull (producer)	Whether a thread that sends messages to a full SEDA queue will block until the queue’s capacity is no longer exhausted. By default, an exception will be thrown stating that the queue is full. By enabling this option, the calling thread will instead block and wait until the message can be accepted.	false	boolean
defaultDiscardWhenFull (producer)	Whether a thread that sends messages to a full SEDA queue will be discarded. By default, an exception will be thrown stating that the queue is full. By enabling this option, the calling thread will give up sending and continue, meaning that the message was not sent to the SEDA queue.	false	boolean
defaultOfferTimeout (producer)	Whether a thread that sends messages to a full SEDA queue will block until the queue’s capacity is no longer exhausted. By default, an exception will be thrown stating that the queue is full. By enabling this option, where a configured timeout can be added to the block case. Utilizing the .offer(timeout) method of the underlining java queue		long
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
autowiredEnabled (advanced)	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	boolean
defaultQueueFactory (advanced)	Sets the default queue factory.		BlockingQueueFactory
queueSize (advanced)	Sets the default maximum capacity of the SEDA queue (i.e., the number of messages it can hold).	1000	int

Name

Description

Default

Type

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

concurrentConsumers (consumer)

Sets the default number of concurrent threads processing exchanges.

1

int

defaultBlockWhenFull (producer)

Whether a thread that sends messages to a full SEDA queue will block until the queue’s capacity is no longer exhausted. By default, an exception will be thrown stating that the queue is full. By enabling this option, the calling thread will instead block and wait until the message can be accepted.

false

boolean

defaultDiscardWhenFull (producer)

Whether a thread that sends messages to a full SEDA queue will be discarded. By default, an exception will be thrown stating that the queue is full. By enabling this option, the calling thread will give up sending and continue, meaning that the message was not sent to the SEDA queue.

false

boolean

defaultOfferTimeout (producer)

Whether a thread that sends messages to a full SEDA queue will block until the queue’s capacity is no longer exhausted. By default, an exception will be thrown stating that the queue is full. By enabling this option, where a configured timeout can be added to the block case. Utilizing the .offer(timeout) method of the underlining java queue

long

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

defaultQueueFactory (advanced)

Sets the default queue factory.

BlockingQueueFactory

queueSize (advanced)

Sets the default maximum capacity of the SEDA queue (i.e., the number of messages it can hold).

1000

int

The SEDA endpoint is configured using URI syntax:

seda:name

with the following path and query parameters:

Path Parameters (1 parameters):

Name	Description	Default	Type
name	Required Name of queue		String

Name

Description

Default

Type

name

Required Name of queue

String

Query Parameters (19 parameters):

Name	Description	Default	Type
size (common)	The maximum capacity of the SEDA queue (i.e., the number of messages it can hold). Will by default use the defaultSize set on the SEDA component.	1000	int
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
concurrentConsumers (consumer)	Number of concurrent threads processing exchanges.	1	int
exceptionHandler (consumer)	To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.		ExceptionHandler
exchangePattern (consumer)	Sets the exchange pattern when the consumer creates an exchange. There are 3 enums and the value can be one of: InOnly, InOut, InOptionalOut		ExchangePattern
limitConcurrentConsumers (consumer)	Whether to limit the number of concurrentConsumers to the maximum of 500. By default, an exception will be thrown if an endpoint is configured with a greater number. You can disable that check by turning this option off.	true	boolean
multipleConsumers (consumer)	Specifies whether multiple consumers are allowed. If enabled, you can use SEDA for Publish-Subscribe messaging. That is, you can send a message to the SEDA queue and have each consumer receive a copy of the message. When enabled, this option should be specified on every consumer endpoint.	false	boolean
pollTimeout (consumer)	The timeout used when polling. When a timeout occurs, the consumer can check whether it is allowed to continue running. Setting a lower value allows the consumer to react more quickly upon shutdown.	1000	int
purgeWhenStopping (consumer)	Whether to purge the task queue when stopping the consumer/route. This allows to stop faster, as any pending messages on the queue is discarded.	false	boolean
blockWhenFull (producer)	Whether a thread that sends messages to a full SEDA queue will block until the queue’s capacity is no longer exhausted. By default, an exception will be thrown stating that the queue is full. By enabling this option, the calling thread will instead block and wait until the message can be accepted.	false	boolean
discardIfNoConsumers (producer)	Whether the producer should discard the message (do not add the message to the queue), when sending to a queue with no active consumers. Only one of the options discardIfNoConsumers and failIfNoConsumers can be enabled at the same time.	false	boolean
discardWhenFull (producer)	Whether a thread that sends messages to a full SEDA queue will be discarded. By default, an exception will be thrown stating that the queue is full. By enabling this option, the calling thread will give up sending and continue, meaning that the message was not sent to the SEDA queue.	false	boolean
failIfNoConsumers (producer)	Whether the producer should fail by throwing an exception, when sending to a queue with no active consumers. Only one of the options discardIfNoConsumers and failIfNoConsumers can be enabled at the same time.	false	boolean
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
offerTimeout (producer)	offerTimeout (in milliseconds) can be added to the block case when queue is full. You can disable timeout by using 0 or a negative value.		long
timeout (producer)	Timeout (in milliseconds) before a SEDA producer will stop waiting for an asynchronous task to complete. You can disable timeout by using 0 or a negative value.	30000	long
waitForTaskToComplete (producer)	Option to specify whether the caller should wait for the async task to complete or not before continuing. The following three options are supported: Always, Never or IfReplyExpected. The first two values are self-explanatory. The last value, IfReplyExpected, will only wait if the message is Request Reply based. The default option is IfReplyExpected. There are 3 enums and the value can be one of: Never, IfReplyExpected, Always	IfReplyExpected	WaitForTaskToComplete
queue (advanced)	Define the queue instance which will be used by the endpoint		BlockingQueue
synchronous (advanced)	Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).	false	boolean

Name

Description

Default

Type

size (common)

The maximum capacity of the SEDA queue (i.e., the number of messages it can hold). Will by default use the defaultSize set on the SEDA component.

1000

int

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

concurrentConsumers (consumer)

Number of concurrent threads processing exchanges.

1

int

exceptionHandler (consumer)

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer)

Sets the exchange pattern when the consumer creates an exchange. There are 3 enums and the value can be one of: InOnly, InOut, InOptionalOut

ExchangePattern

limitConcurrentConsumers (consumer)

Whether to limit the number of concurrentConsumers to the maximum of 500. By default, an exception will be thrown if an endpoint is configured with a greater number. You can disable that check by turning this option off.

true

boolean

multipleConsumers (consumer)

Specifies whether multiple consumers are allowed. If enabled, you can use SEDA for Publish-Subscribe messaging. That is, you can send a message to the SEDA queue and have each consumer receive a copy of the message. When enabled, this option should be specified on every consumer endpoint.

false

boolean

pollTimeout (consumer)

The timeout used when polling. When a timeout occurs, the consumer can check whether it is allowed to continue running. Setting a lower value allows the consumer to react more quickly upon shutdown.

1000

int

purgeWhenStopping (consumer)

Whether to purge the task queue when stopping the consumer/route. This allows to stop faster, as any pending messages on the queue is discarded.

false

boolean

blockWhenFull (producer)

Whether a thread that sends messages to a full SEDA queue will block until the queue’s capacity is no longer exhausted. By default, an exception will be thrown stating that the queue is full. By enabling this option, the calling thread will instead block and wait until the message can be accepted.

false

boolean

discardIfNoConsumers (producer)

Whether the producer should discard the message (do not add the message to the queue), when sending to a queue with no active consumers. Only one of the options discardIfNoConsumers and failIfNoConsumers can be enabled at the same time.

false

boolean

discardWhenFull (producer)

Whether a thread that sends messages to a full SEDA queue will be discarded. By default, an exception will be thrown stating that the queue is full. By enabling this option, the calling thread will give up sending and continue, meaning that the message was not sent to the SEDA queue.

false

boolean

failIfNoConsumers (producer)

Whether the producer should fail by throwing an exception, when sending to a queue with no active consumers. Only one of the options discardIfNoConsumers and failIfNoConsumers can be enabled at the same time.

false

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

offerTimeout (producer)

offerTimeout (in milliseconds) can be added to the block case when queue is full. You can disable timeout by using 0 or a negative value.

long

timeout (producer)

Timeout (in milliseconds) before a SEDA producer will stop waiting for an asynchronous task to complete. You can disable timeout by using 0 or a negative value.

30000

long

waitForTaskToComplete (producer)

Option to specify whether the caller should wait for the async task to complete or not before continuing. The following three options are supported: Always, Never or IfReplyExpected. The first two values are self-explanatory. The last value, IfReplyExpected, will only wait if the message is Request Reply based. The default option is IfReplyExpected. There are 3 enums and the value can be one of: Never, IfReplyExpected, Always

IfReplyExpected

WaitForTaskToComplete

queue (advanced)

Define the queue instance which will be used by the endpoint

BlockingQueue

synchronous (advanced)

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

boolean

Choosing BlockingQueue implementation

Since Camel 2.12

By default, the SEDA component always intantiates LinkedBlockingQueue, but you can use different implementation, you can reference your own BlockingQueue implementation, in this case the size option is not used

<bean id="arrayQueue" class="java.util.ArrayBlockingQueue">
  <constructor-arg index="0" value="10" ><!-- size -->
  <constructor-arg index="1" value="true" ><!-- fairness -->
</bean>

<!-- ... and later -->
<from>seda:array?queue=#arrayQueue</from>

Or you can reference a BlockingQueueFactory implementation, 3 implementations are provided LinkedBlockingQueueFactory, ArrayBlockingQueueFactory and PriorityBlockingQueueFactory:

<bean id="priorityQueueFactory" class="org.apache.camel.component.seda.PriorityBlockingQueueFactory">
  <property name="comparator">
    <bean class="org.apache.camel.demo.MyExchangeComparator" />
  </property>
</bean>

<!-- ... and later -->
<from>seda:priority?queueFactory=#priorityQueueFactory&size=100</from>

Use of Request Reply

The SEDA component supports using Request Reply, where the caller will wait for the Async route to complete. For instance:

from("mina:tcp://0.0.0.0:9876?textline=true&sync=true").to("seda:input");

from("seda:input").to("bean:processInput").to("bean:createResponse");

In the route above, we have a TCP listener on port 9876 that accepts incoming requests. The request is routed to the seda:input queue. As it is a Request Reply message, we wait for the response. When the consumer on the seda:input queue is complete, it copies the response to the original message response.

Concurrent consumers

By default, the SEDA endpoint uses a single consumer thread, but you can configure it to use concurrent consumer threads. So instead of thread pools you can use:

from("seda:stageName?concurrentConsumers=5").process(...)

As for the difference between the two, note a thread pool can increase/shrink dynamically at runtime depending on load, whereas the number of concurrent consumers is always fixed.

Thread pools

Be aware that adding a thread pool to a SEDA endpoint by doing something like:

from("seda:stageName").thread(5).process(...)

Can wind up with two BlockQueues: one from the SEDA endpoint, and one from the workqueue of the thread pool, which may not be what you want. Instead, you might wish to configure a Direct endpoint with a thread pool, which can process messages both synchronously and asynchronously. For example:

from("direct:stageName").thread(5).process(...)

You can also directly configure number of threads that process messages on a SEDA endpoint using the concurrentConsumers option.

Sample

In the route below we use the SEDA queue to send the request to this async queue to be able to send a fire-and-forget message for further processing in another thread, and return a constant reply in this thread to the original caller.

    @Test
    public void testSendAsync() throws Exception {
        MockEndpoint mock = getMockEndpoint("mock:result");
        mock.expectedBodiesReceived("Hello World");

        // START SNIPPET: e2
        Object out = template.requestBody("direct:start", "Hello World");
        assertEquals("OK", out);
        // END SNIPPET: e2

        assertMockEndpointsSatisfied();
    }

    @Override
    protected RouteBuilder createRouteBuilder() throws Exception {
        return new RouteBuilder() {
            // START SNIPPET: e1
            public void configure() throws Exception {
                from("direct:start")
                    // send it to the seda queue that is async
                    .to("seda:next")
                    // return a constant response
                    .transform(constant("OK"));

                from("seda:next").to("mock:result");
            }
            // END SNIPPET: e1
        };
    }

Here we send a Hello World message and expects the reply to be OK.

    @Test
    public void testSendAsync() throws Exception {
        MockEndpoint mock = getMockEndpoint("mock:result");
        mock.expectedBodiesReceived("Hello World");

        // START SNIPPET: e2
        Object out = template.requestBody("direct:start", "Hello World");
        assertEquals("OK", out);
        // END SNIPPET: e2

        assertMockEndpointsSatisfied();
    }

    @Override
    protected RouteBuilder createRouteBuilder() throws Exception {
        return new RouteBuilder() {
            // START SNIPPET: e1
            public void configure() throws Exception {
                from("direct:start")
                    // send it to the seda queue that is async
                    .to("seda:next")
                    // return a constant response
                    .transform(constant("OK"));

                from("seda:next").to("mock:result");
            }
            // END SNIPPET: e1
        };
    }

The "Hello World" message will be consumed from the SEDA queue from another thread for further processing. Since this is from a unit test, it will be sent to a mock endpoint where we can do assertions in the unit test.

Using multipleConsumers

Since Camel 2.2

In this example we have defined two consumers and registered them as spring beans.

Since we have specified multipleConsumers=true on the seda foo endpoint we can have those two consumers receive their own copy of the message as a kind of pub-sub style messaging.

As the beans are part of an unit test they simply send the message to a mock endpoint, but notice how we can use @Consume to consume from the seda queue.

Extracting queue information.

If needed, information such as queue size, etc. can be obtained without using JMX in this fashion:

SedaEndpoint seda = context.getEndpoint("seda:xxxx");
int size = seda.getExchanges().size();

Spring Boot Auto-Configuration

When using seda with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-seda-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 10 options, which are listed below.

Name	Description	Default	Type
camel.component.seda.autowired-enabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	Boolean
camel.component.seda.bridge-error-handler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	Boolean
camel.component.seda.concurrent-consumers	Sets the default number of concurrent threads processing exchanges.	1	Integer
camel.component.seda.default-block-when-full	Whether a thread that sends messages to a full SEDA queue will block until the queue’s capacity is no longer exhausted. By default, an exception will be thrown stating that the queue is full. By enabling this option, the calling thread will instead block and wait until the message can be accepted.	false	Boolean
camel.component.seda.default-discard-when-full	Whether a thread that sends messages to a full SEDA queue will be discarded. By default, an exception will be thrown stating that the queue is full. By enabling this option, the calling thread will give up sending and continue, meaning that the message was not sent to the SEDA queue.	false	Boolean
camel.component.seda.default-offer-timeout	Whether a thread that sends messages to a full SEDA queue will block until the queue’s capacity is no longer exhausted. By default, an exception will be thrown stating that the queue is full. By enabling this option, where a configured timeout can be added to the block case. Utilizing the .offer(timeout) method of the underlining java queue		Long
camel.component.seda.default-queue-factory	Sets the default queue factory. The option is a org.apache.camel.component.seda.BlockingQueueFactory<org.apache.camel.Exchange> type.		BlockingQueueFactory
camel.component.seda.enabled	Whether to enable auto configuration of the seda component. This is enabled by default.		Boolean
camel.component.seda.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.seda.queue-size	Sets the default maximum capacity of the SEDA queue (i.e., the number of messages it can hold).	1000	Integer

Name

Description

Default

Type

camel.component.seda.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.seda.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.seda.concurrent-consumers

Sets the default number of concurrent threads processing exchanges.

1

Integer

camel.component.seda.default-block-when-full

Whether a thread that sends messages to a full SEDA queue will block until the queue’s capacity is no longer exhausted. By default, an exception will be thrown stating that the queue is full. By enabling this option, the calling thread will instead block and wait until the message can be accepted.

false

Boolean

camel.component.seda.default-discard-when-full

Whether a thread that sends messages to a full SEDA queue will be discarded. By default, an exception will be thrown stating that the queue is full. By enabling this option, the calling thread will give up sending and continue, meaning that the message was not sent to the SEDA queue.

false

Boolean

camel.component.seda.default-offer-timeout

Whether a thread that sends messages to a full SEDA queue will block until the queue’s capacity is no longer exhausted. By default, an exception will be thrown stating that the queue is full. By enabling this option, where a configured timeout can be added to the block case. Utilizing the .offer(timeout) method of the underlining java queue

Long

camel.component.seda.default-queue-factory

Sets the default queue factory. The option is a org.apache.camel.component.seda.BlockingQueueFactory<org.apache.camel.Exchange> type.

BlockingQueueFactory

camel.component.seda.enabled

Whether to enable auto configuration of the seda component. This is enabled by default.

Boolean

camel.component.seda.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.seda.queue-size

Sets the default maximum capacity of the SEDA queue (i.e., the number of messages it can hold).

1000

Integer