Salesforce

Since Camel 2.12

Both producer and consumer are supported

This component supports producer and consumer endpoints to communicate with Salesforce using Java DTOs.
There is a companion maven plugin Camel Salesforce Plugin that generates these DTOs (see further below).

Maven users will need to add the following dependency to their pom.xml for this component:

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-salesforce</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

Developers wishing to contribute to the component are instructed to look at the README.md file on instructions on how to get started and setup your environment for running integration tests.

Authenticating to Salesforce

The component supports three OAuth authentication flows:

For each of the flow different set of properties needs to be set:

Table 1. Properties to set for each authentication flow
Property	Where to find it on Salesforce	Flow
clientId	Connected App, Consumer Key	All flows
clientSecret	Connected App, Consumer Secret	Username-Password, Refresh Token
userName	Salesforce user username	Username-Password, JWT Bearer Token
password	Salesforce user password	Username-Password
refreshToken	From OAuth flow callback	Refresh Token
keystore	Connected App, Digital Certificate	JWT Bearer Token

The component auto determines what flow you’re trying to configure, to be remove ambiguity set the authenticationType property.

Using Username-Password Flow in production is not encouraged.

The certificate used in JWT Bearer Token Flow can be a selfsigned certificate. The KeyStore holding the certificate and the private key must contain only single certificate-private key entry.

URI format

When used as a consumer, receiving streaming events, the URI scheme is:

salesforce:topic?options

When used as a producer, invoking the Salesforce REST APIs, the URI scheme is:

salesforce:operationName?options

You can append query options to the URI in the following format, ?option=value&option=value&…

Passing in Salesforce headers and fetching Salesforce response headers

There is support to pass Salesforce headers via inbound message headers, header names that start with Sforce or x-sfdc on the Camel message will be passed on in the request, and response headers that start with Sforce will be present in the outbound message headers.

For example to fetch API limits you can specify:

// in your Camel route set the header before Salesforce endpoint
//...
  .setHeader("Sforce-Limit-Info", constant("api-usage"))
  .to("salesforce:getGlobalObjects")
  .to(myProcessor);

// myProcessor will receive `Sforce-Limit-Info` header on the outbound
// message
class MyProcessor implements Processor {
    public void process(Exchange exchange) throws Exception {
        Message in = exchange.getIn();
        String apiLimits = in.getHeader("Sforce-Limit-Info", String.class);
   }
}

Supported Salesforce APIs

The component supports the following Salesforce APIs

Producer endpoints can use the following APIs. Most of the APIs process one record at a time, the Query API can retrieve multiple Records.

Rest API

You can use the following for operationName:

getVersions - Gets supported Salesforce REST API versions
getResources - Gets available Salesforce REST Resource endpoints
getGlobalObjects - Gets metadata for all available SObject types
getBasicInfo - Gets basic metadata for a specific SObject type
getDescription - Gets comprehensive metadata for a specific SObject type
getSObject - Gets an SObject using its Salesforce Id
createSObject - Creates an SObject
updateSObject - Updates an SObject using Id
deleteSObject - Deletes an SObject using Id
getSObjectWithId - Gets an SObject using an external (user defined) id field
upsertSObject - Updates or inserts an SObject using an external id
deleteSObjectWithId - Deletes an SObject using an external id
query - Runs a Salesforce SOQL query
queryMore - Retrieves more results (in case of large number of results) using result link returned from the 'query' API
search - Runs a Salesforce SOSL query
limits - fetching organization API usage limits
recent - fetching recent items
approval - submit a record or records (batch) for approval process
approvals - fetch a list of all approval processes
composite - submit up to 25 possibly related REST requests and receive individual responses
composite-tree - create up to 200 records with parent-child relationships (up to 5 levels) in one go
composite-batch - submit a composition of requests in batch
queryAll - Runs a SOQL query. It returns the results that are deleted because of a merge or delete. Also returns the information about archived Task and Event records.
getBlobField - Retrieves the specified blob field from an individual record.
apexCall - Executes a user defined APEX REST API call.

For example, the following producer endpoint uses the upsertSObject API, with the sObjectIdName parameter specifying 'Name' as the external id field. The request message body should be an SObject DTO generated using the maven plugin. The response message will either be null if an existing record was updated, or CreateSObjectResult with an id of the new record, or a list of errors while creating the new object.

...to("salesforce:upsertSObject?sObjectIdName=Name")...

Rest Bulk API

Producer endpoints can use the following APIs. All Job data formats, i.e. xml, csv, zip/xml, and zip/csv are supported.
The request and response have to be marshalled/unmarshalled by the route. Usually the request will be some stream source like a CSV file,
and the response may also be saved to a file to be correlated with the request.

You can use the following for operationName:

createJob - Creates a Salesforce Bulk Job
getJob - Gets a Job using its Salesforce Id
closeJob - Closes a Job
abortJob - Aborts a Job
createBatch - Submits a Batch within a Bulk Job
getBatch - Gets a Batch using Id
getAllBatches - Gets all Batches for a Bulk Job Id
getRequest - Gets Request data (XML/CSV) for a Batch
getResults - Gets the results of the Batch when its complete
createBatchQuery - Creates a Batch from an SOQL query
getQueryResultIds - Gets a list of Result Ids for a Batch Query
getQueryResult - Gets results for a Result Id
getRecentReports - Gets up to 200 of the reports you most recently viewed by sending a GET request to the Report List resource.
getReportDescription - Retrieves the report, report type, and related metadata for a report, either in a tabular or summary or matrix format.
executeSyncReport - Runs a report synchronously with or without changing filters and returns the latest summary data.
executeAsyncReport - Runs an instance of a report asynchronously with or without filters and returns the summary data with or without details.
getReportInstances - Returns a list of instances for a report that you requested to be run asynchronously. Each item in the list is treated as a separate instance of the report.
getReportResults: Contains the results of running a report.

For example, the following producer endpoint uses the createBatch API to create a Job Batch. The in message must contain a body that can be converted into an InputStream (usually UTF-8 CSV or XML content from a file, etc.) and header fields 'jobId' for the Job and 'contentType' for the Job content type, which can be XML, CSV, ZIP_XML or ZIP_CSV. The put message body will contain BatchInfo on success, or throw a SalesforceException on error.

...to("salesforce:createBatchJob")..

Rest Streaming API

Consumer endpoints can use the following syntax for streaming endpoints to receive Salesforce notifications on create/update.

To create and subscribe to a topic

from("salesforce:CamelTestTopic?notifyForFields=ALL&notifyForOperations=ALL&sObjectName=Merchandise__c&updateTopic=true&sObjectQuery=SELECT Id, Name FROM Merchandise__c")...

To subscribe to an existing topic

from("salesforce:CamelTestTopic&sObjectName=Merchandise__c")...

Platform events

To emit a platform event use createSObject operation. And set the message body can be JSON string or InputStream with key-value data — in that case sObjectName needs to be set to the API name of the event, or a class that extends from AbstractDTOBase with the appropriate class name for the event.

For example using a DTO:

class Order_Event__e extends AbstractDTOBase {
  @JsonProperty("OrderNumber")
  private String orderNumber;
  // ... other properties and getters/setters
}

from("timer:tick")
    .process(exchange -> {
        final Message in = exchange.getIn();
        String orderNumber = "ORD" + String.valueOf(in.getHeader(Exchange.TIMER_COUNTER));
        Order_Event__e event = new Order_Event__e();
        event.setOrderNumber(orderNumber);
        in.setBody(event);
    })
    .to("salesforce:createSObject");

Or using JSON event data:

from("timer:tick")
    .process(exchange -> {
        final Message in = exchange.getIn();
        String orderNumber = "ORD" + String.valueOf(in.getHeader(Exchange.TIMER_COUNTER));
        in.setBody("{\"OrderNumber\":\"" + orderNumber + "\"}");
    })
    .to("salesforce:createSObject?sObjectName=Order_Event__e");

To receive platform events use the consumer endpoint with the API name of the platform event prefixed with event/ (or /event/), e.g.: salesforce:events/Order_Event__e. Processor consuming from that endpoint will receive either org.apache.camel.component.salesforce.api.dto.PlatformEvent object or org.cometd.bayeux.Message in the body depending on the rawPayload being false or true respectively.

For example, in the simplest form to consume one event:

PlatformEvent event = consumer.receiveBody("salesforce:event/Order_Event__e", PlatformEvent.class);

Change data capture events

On the one hand, Salesforce could be configured to emit notifications for record changes of select objects. On the other hand, the Camel Salesforce component could react to such notifications, allowing for instance to synchronize those changes into an external system.

The notifications of interest could be specified in the from("salesforce:XXX") clause of a Camel route via the subscription channel, e.g:

from("salesforce:data/ChangeEvents?replayId=-1").log("being notified of all change events")
from("salesforce:data/AccountChangeEvent?replayId=-1").log("being notified of change events for Account records")
from("salesforce:data/Employee__ChangeEvent?replayId=-1").log("being notified of change events for Employee__c custom object")

The received message contains either java.util.Map<String,Object> or org.cometd.bayeux.Message in the body depending on the rawPayload being false or true respectively. The CamelSalesforceChangeType header could be valued to one of CREATE, UPDATE, DELETE or UNDELETE.

More details about how to use the Camel Salesforce component change data capture capabilities could be found in the ChangeEventsConsumerIntegrationTest.

The Salesforce developer guide is a good fit to better know the subtleties of implementing a change data capture integration application. The dynamic nature of change event body fields, high level replication steps as well as security considerations could be of interest.

Examples

Uploading a document to a ContentWorkspace

Create the ContentVersion in Java, using a Processor instance:

public class ContentProcessor implements Processor {
    public void process(Exchange exchange) throws Exception {
        Message message = exchange.getIn();

        ContentVersion cv = new ContentVersion();
        ContentWorkspace cw = getWorkspace(exchange);
        cv.setFirstPublishLocationId(cw.getId());
        cv.setTitle("test document");
        cv.setPathOnClient("test_doc.html");
        byte[] document = message.getBody(byte[].class);
        ObjectMapper mapper = new ObjectMapper();
        String enc = mapper.convertValue(document, String.class);
        cv.setVersionDataUrl(enc);
        message.setBody(cv);
    }

    protected ContentWorkspace getWorkSpace(Exchange exchange) {
        // Look up the content workspace somehow, maybe use enrich() to add it to a
        // header that can be extracted here
        ....
    }
}

Give the output from the processor to the Salesforce component:

from("file:///home/camel/library")
    .to(new ContentProcessor())     // convert bytes from the file into a ContentVersion SObject
                                    // for the salesforce component
    .to("salesforce:createSObject");

Using Salesforce Limits API

With salesforce:limits operation you can fetch of API limits from Salesforce and then act upon that data received. The result of salesforce:limits operation is mapped to org.apache.camel.component.salesforce.api.dto.Limits class and can be used in a custom processors or expressions.

For instance, consider that you need to limit the API usage of Salesforce so that 10% of daily API requests is left for other routes. The body of output message contains an instance of org.apache.camel.component.salesforce.api.dto.Limits object that can be used in conjunction with Content Based Router and Content Based Router and Spring Expression Language (SpEL) to choose when to perform queries.

Notice how multiplying 1.0 with the integer value held in body.dailyApiRequests.remaining makes the expression evaluate as with floating point arithmetic, without it - it would end up making integral division which would result with either 0 (some API limits consumed) or 1 (no API limits consumed).

from("direct:querySalesforce")
    .to("salesforce:limits")
    .choice()
    .when(spel("#{1.0 * body.dailyApiRequests.remaining / body.dailyApiRequests.max < 0.1}"))
        .to("salesforce:query?...")
    .otherwise()
        .setBody(constant("Used up Salesforce API limits, leaving 10% for critical routes"))
    .endChoice()

Working with approvals

All the properties are named exactly the same as in the Salesforce REST API prefixed with approval.. You can set approval properties by setting approval.PropertyName of the Endpoint these will be used as template — meaning that any property not present in either body or header will be taken from the Endpoint configuration. Or you can set the approval template on the Endpoint by assigning approval property to a reference onto a bean in the Registry.

You can also provide header values using the same approval.PropertyName in the incoming message headers.

And finally body can contain one AprovalRequest or an Iterable of ApprovalRequest objects to process as a batch.

The important thing to remember is the priority of the values specified in these three mechanisms:

value in body takes precedence before any other
value in message header takes precedence before template value
value in template is set if no other value in header or body was given

For example to send one record for approval using values in headers use:

Given a route:

from("direct:example1")//
        .setHeader("approval.ContextId", simple("${body['contextId']}"))
        .setHeader("approval.NextApproverIds", simple("${body['nextApproverIds']}"))
        .to("salesforce:approval?"//
            + "approval.actionType=Submit"//
            + "&approval.comments=this is a test"//
            + "&approval.processDefinitionNameOrId=Test_Account_Process"//
            + "&approval.skipEntryCriteria=true");

You could send a record for approval using:

final Map<String, String> body = new HashMap<>();
body.put("contextId", accountIds.iterator().next());
body.put("nextApproverIds", userId);

final ApprovalResult result = template.requestBody("direct:example1", body, ApprovalResult.class);

Using Salesforce Recent Items API

To fetch the recent items use salesforce:recent operation. This operation returns an java.util.List of org.apache.camel.component.salesforce.api.dto.RecentItem objects (List<RecentItem>) that in turn contain the Id, Name and Attributes (with type and url properties). You can limit the number of returned items by specifying limit parameter set to maximum number of records to return. For example:

from("direct:fetchRecentItems")
    to("salesforce:recent")
        .split().body()
            .log("${body.name} at ${body.attributes.url}");

Using Salesforce Composite API to submit SObject tree

To create up to 200 records including parent-child relationships use salesforce:composite-tree operation. This requires an instance of org.apache.camel.component.salesforce.api.dto.composite.SObjectTree in the input message and returns the same tree of objects in the output message. The org.apache.camel.component.salesforce.api.dto.AbstractSObjectBase instances within the tree get updated with the identifier values (Id property) or their corresponding org.apache.camel.component.salesforce.api.dto.composite.SObjectNode is populated with errors on failure.

Note that for some records operation can succeed and for some it can fail — so you need to manually check for errors.

Easiest way to use this functionality is to use the DTOs generated by the camel-salesforce-maven-plugin, but you also have the option of customizing the references that identify the each object in the tree, for instance primary keys from your database.

Lets look at an example:

Account account = ...
Contact president = ...
Contact marketing = ...

Account anotherAccount = ...
Contact sales = ...
Asset someAsset = ...

// build the tree
SObjectTree request = new SObjectTree();
request.addObject(account).addChildren(president, marketing);
request.addObject(anotherAccount).addChild(sales).addChild(someAsset);

final SObjectTree response = template.requestBody("salesforce:composite-tree", tree, SObjectTree.class);
final Map<Boolean, List<SObjectNode>> result = response.allNodes()
                                                   .collect(Collectors.groupingBy(SObjectNode::hasErrors));

final List<SObjectNode> withErrors = result.get(true);
final List<SObjectNode> succeeded = result.get(false);

final String firstId = succeeded.get(0).getId();

Using Salesforce Composite API to submit multiple requests in a batch

The Composite API batch operation (composite-batch) allows you to accumulate multiple requests in a batch and then submit them in one go, saving the round trip cost of multiple individual requests. Each response is then received in a list of responses with the order preserved, so that the n-th requests response is in the n-th place of the response.

The results can vary from API to API so the result of the request is given as a java.lang.Object. In most cases the result will be a java.util.Map with string keys and values or other java.util.Map as value. Requests made in JSON format hold some type information (i.e. it is known what values are strings and what values are numbers), so in general those will be more type friendly. Note that the responses will vary between XML and JSON, this is due to the responses from Salesforce API being different. So be careful if you switch between formats without changing the response handling code.

Lets look at an example:

final String acountId = ...
final SObjectBatch batch = new SObjectBatch("38.0");

final Account updates = new Account();
updates.setName("NewName");
batch.addUpdate("Account", accountId, updates);

final Account newAccount = new Account();
newAccount.setName("Account created from Composite batch API");
batch.addCreate(newAccount);

batch.addGet("Account", accountId, "Name", "BillingPostalCode");

batch.addDelete("Account", accountId);

final SObjectBatchResponse response = template.requestBody("salesforce:composite-batch?format=JSON", batch, SObjectBatchResponse.class);

boolean hasErrors = response.hasErrors(); // if any of the requests has resulted in either 4xx or 5xx HTTP status
final List<SObjectBatchResult> results = response.getResults(); // results of three operations sent in batch

final SObjectBatchResult updateResult = results.get(0); // update result
final int updateStatus = updateResult.getStatusCode(); // probably 204
final Object updateResultData = updateResult.getResult(); // probably null

final SObjectBatchResult createResult = results.get(1); // create result
@SuppressWarnings("unchecked")
final Map<String, Object> createData = (Map<String, Object>) createResult.getResult();
final String newAccountId = createData.get("id"); // id of the new account, this is for JSON, for XML it would be createData.get("Result").get("id")

final SObjectBatchResult retrieveResult = results.get(2); // retrieve result
@SuppressWarnings("unchecked")
final Map<String, Object> retrieveData = (Map<String, Object>) retrieveResult.getResult();
final String accountName = retrieveData.get("Name"); // Name of the retrieved account, this is for JSON, for XML it would be createData.get("Account").get("Name")
final String accountBillingPostalCode = retrieveData.get("BillingPostalCode"); // Name of the retrieved account, this is for JSON, for XML it would be createData.get("Account").get("BillingPostalCode")

final SObjectBatchResult deleteResult = results.get(3); // delete result
final int updateStatus = deleteResult.getStatusCode(); // probably 204
final Object updateResultData = deleteResult.getResult(); // probably null

Using Salesforce Composite API to submit multiple chained requests

The composite operation allows submitting up to 25 requests that can be chained together, for instance identifier generated in previous request can be used in subsequent request. Individual requests and responses are linked with the provided reference.

Composite API supports only JSON payloads.

As with the batch API the results can vary from API to API so the result of the request is given as a java.lang.Object. In most cases the result will be a java.util.Map with string keys and values or other java.util.Map as value. Requests made in JSON format hold some type information (i.e. it is known what values are strings and what values are numbers), so in general those will be more type friendly.

Lets look at an example:

SObjectComposite composite = new SObjectComposite("38.0", true);

// first insert operation via an external id
final Account updateAccount = new TestAccount();
updateAccount.setName("Salesforce");
updateAccount.setBillingStreet("Landmark @ 1 Market Street");
updateAccount.setBillingCity("San Francisco");
updateAccount.setBillingState("California");
updateAccount.setIndustry(Account_IndustryEnum.TECHNOLOGY);
composite.addUpdate("Account", "001xx000003DIpcAAG", updateAccount, "UpdatedAccount");

final Contact newContact = new TestContact();
newContact.setLastName("John Doe");
newContact.setPhone("1234567890");
composite.addCreate(newContact, "NewContact");

final AccountContactJunction__c junction = new AccountContactJunction__c();
junction.setAccount__c("001xx000003DIpcAAG");
junction.setContactId__c("@{NewContact.id}");
composite.addCreate(junction, "JunctionRecord");

final SObjectCompositeResponse response = template.requestBody("salesforce:composite?format=JSON", composite, SObjectCompositeResponse.class);
final List<SObjectCompositeResult> results = response.getCompositeResponse();

final SObjectCompositeResult accountUpdateResult = results.stream().filter(r -> "UpdatedAccount".equals(r.getReferenceId())).findFirst().get()
final int statusCode = accountUpdateResult.getHttpStatusCode(); // should be 200
final Map<String, ?> accountUpdateBody = accountUpdateResult.getBody();

final SObjectCompositeResult contactCreationResult = results.stream().filter(r -> "JunctionRecord".equals(r.getReferenceId())).findFirst().get()

Sending null values to salesforce

By default, SObject fields with null values are not sent to salesforce. In order to send null values to salesforce, use the fieldsToNull property, as follows:

accountSObject.getFieldsToNull().add("Site");

Generating SOQL query strings

org.apache.camel.component.salesforce.api.utils.QueryHelper contains helper methods to generate SOQL queries. For instance to fetch all custom fields from Account SObject you can simply generate the SOQL SELECT by invoking:

String allCustomFieldsQuery = QueryHelper.queryToFetchFilteredFieldsOf(new Account(), SObjectField::isCustom);

Camel Salesforce Maven Plugin

This Maven plugin generates DTOs for the Camel.

For obvious security reasons it is recommended that the clientId, clientSecret, userName and password fields be not set in the pom.xml. The plugin should be configured for the rest of the properties, and can be executed using the following command:

mvn camel-salesforce:generate -DcamelSalesforce.clientId=<clientid> -DcamelSalesforce.clientSecret=<clientsecret> \
    -DcamelSalesforce.userName=<username> -DcamelSalesforce.password=<password>

The generated DTOs use Jackson and XStream annotations. All Salesforce field types are supported. Date and time fields are mapped to java.time.ZonedDateTime by default, and picklist fields are mapped to generated Java Enumerations.

Please refer to README.md for details on how to generate the DTO.

Options

The Salesforce component supports 73 options, which are listed below.

Name	Description	Default	Type
apexMethod (common)	APEX method name		String
apexQueryParams (common)	Query params for APEX method		Map
apexUrl (common)	APEX method URL		String
apiVersion (common)	Salesforce API version.	50.0	String
backoffIncrement (common)	Backoff interval increment for Streaming connection restart attempts for failures beyond CometD auto-reconnect.	1000	long
batchId (common)	Bulk API Batch ID		String
contentType (common)	Bulk API content type, one of XML, CSV, ZIP_XML, ZIP_CSV. There are 6 enums and the value can be one of: XML, CSV, JSON, ZIP_XML, ZIP_CSV, ZIP_JSON		ContentType
defaultReplayId (common)	Default replayId setting if no value is found in initialReplayIdMap	-1	Long
format (common)	Payload format to use for Salesforce API calls, either JSON or XML, defaults to JSON. There are 2 enums and the value can be one of: JSON, XML		PayloadFormat
httpClient (common)	Custom Jetty Http Client to use to connect to Salesforce.		SalesforceHttpClient
httpClientConnectionTimeout (common)	Connection timeout used by the HttpClient when connecting to the Salesforce server.	60000	long
httpClientIdleTimeout (common)	Timeout used by the HttpClient when waiting for response from the Salesforce server.	10000	long
httpMaxContentLength (common)	Max content length of an HTTP response.		Integer
httpRequestBufferSize (common)	HTTP request buffer size. May need to be increased for large SOQL queries.	8192	Integer
includeDetails (common)	Include details in Salesforce1 Analytics report, defaults to false.		Boolean
initialReplayIdMap (common)	Replay IDs to start from per channel name.		Map
instanceId (common)	Salesforce1 Analytics report execution instance ID		String
jobId (common)	Bulk API Job ID		String
limit (common)	Limit on number of returned records. Applicable to some of the API, check the Salesforce documentation.		Integer
maxBackoff (common)	Maximum backoff interval for Streaming connection restart attempts for failures beyond CometD auto-reconnect.	30000	long
notFoundBehaviour (common)	Sets the behaviour of 404 not found status received from Salesforce API. Should the body be set to NULL NotFoundBehaviour#NULL or should a exception be signaled on the exchange NotFoundBehaviour#EXCEPTION - the default. There are 2 enums and the value can be one of: EXCEPTION, NULL	EXCEPTION	NotFoundBehaviour
notifyForFields (common)	Notify for fields, options are ALL, REFERENCED, SELECT, WHERE. There are 4 enums and the value can be one of: ALL, REFERENCED, SELECT, WHERE		NotifyForFieldsEnum
notifyForOperationCreate (common)	Notify for create operation, defaults to false (API version = 29.0)		Boolean
notifyForOperationDelete (common)	Notify for delete operation, defaults to false (API version = 29.0)		Boolean
notifyForOperations (common)	Notify for operations, options are ALL, CREATE, EXTENDED, UPDATE (API version 29.0). There are 4 enums and the value can be one of: ALL, CREATE, EXTENDED, UPDATE		NotifyForOperationsEnum
notifyForOperationUndelete (common)	Notify for un-delete operation, defaults to false (API version = 29.0)		Boolean
notifyForOperationUpdate (common)	Notify for update operation, defaults to false (API version = 29.0)		Boolean
objectMapper (common)	Custom Jackson ObjectMapper to use when serializing/deserializing Salesforce objects.		ObjectMapper
packages (common)	In what packages are the generated DTO classes. Typically the classes would be generated using camel-salesforce-maven-plugin. This must be set if using the XML format. Also, set it if using the generated DTOs to gain the benefit of using short SObject names in parameters/header values. Multiple packages can be separated by comma.		String
rawPayload (common)	Use raw payload String for request and response (either JSON or XML depending on format), instead of DTOs, false by default	false	boolean
reportId (common)	Salesforce1 Analytics report Id		String
reportMetadata (common)	Salesforce1 Analytics report metadata for filtering		ReportMetadata
resultId (common)	Bulk API Result ID		String
sObjectBlobFieldName (common)	SObject blob field name		String
sObjectClass (common)	Fully qualified SObject class name, usually generated using camel-salesforce-maven-plugin		String
sObjectFields (common)	SObject fields to retrieve		String
sObjectId (common)	SObject ID if required by API		String
sObjectIdName (common)	SObject external ID field name		String
sObjectIdValue (common)	SObject external ID field value		String
sObjectName (common)	SObject name if required or supported by API		String
sObjectQuery (common)	Salesforce SOQL query string		String
sObjectSearch (common)	Salesforce SOSL search string		String
updateTopic (common)	Whether to update an existing Push Topic when using the Streaming API, defaults to false	false	boolean
config (common)	Global endpoint configuration - use to set values that are common to all endpoints		SalesforceEndpointConfig
httpClientProperties (common)	Used to set any properties that can be configured on the underlying HTTP client. Have a look at properties of SalesforceHttpClient and the Jetty HttpClient for all available options.		Map
longPollingTransportProperties (common)	Used to set any properties that can be configured on the LongPollingTransport used by the BayeuxClient (CometD) used by the streaming api		Map
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
autowiredEnabled (advanced)	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	boolean
httpProxyExcludedAddresses (proxy)	A list of addresses for which HTTP proxy server should not be used.		Set
httpProxyHost (proxy)	Hostname of the HTTP proxy server to use.		String
httpProxyIncludedAddresses (proxy)	A list of addresses for which HTTP proxy server should be used.		Set
httpProxyPort (proxy)	Port number of the HTTP proxy server to use.		Integer
httpProxySocks4 (proxy)	If set to true the configures the HTTP proxy to use as a SOCKS4 proxy.	false	boolean
authenticationType (security)	Explicit authentication method to be used, one of USERNAME_PASSWORD, REFRESH_TOKEN or JWT. Salesforce component can auto-determine the authentication method to use from the properties set, set this property to eliminate any ambiguity. There are 3 enums and the value can be one of: USERNAME_PASSWORD, REFRESH_TOKEN, JWT		AuthenticationType
clientId (security)	Required OAuth Consumer Key of the connected app configured in the Salesforce instance setup. Typically a connected app needs to be configured but one can be provided by installing a package.		String
clientSecret (security)	OAuth Consumer Secret of the connected app configured in the Salesforce instance setup.		String
httpProxyAuthUri (security)	Used in authentication against the HTTP proxy server, needs to match the URI of the proxy server in order for the httpProxyUsername and httpProxyPassword to be used for authentication.		String
httpProxyPassword (security)	Password to use to authenticate against the HTTP proxy server.		String
httpProxyRealm (security)	Realm of the proxy server, used in preemptive Basic/Digest authentication methods against the HTTP proxy server.		String
httpProxySecure (security)	If set to false disables the use of TLS when accessing the HTTP proxy.	true	boolean
httpProxyUseDigestAuth (security)	If set to true Digest authentication will be used when authenticating to the HTTP proxy, otherwise Basic authorization method will be used	false	boolean
httpProxyUsername (security)	Username to use to authenticate against the HTTP proxy server.		String
instanceUrl (security)	URL of the Salesforce instance used after authentication, by default received from Salesforce on successful authentication		String
keystore (security)	KeyStore parameters to use in OAuth JWT flow. The KeyStore should contain only one entry with private key and certificate. Salesforce does not verify the certificate chain, so this can easily be a selfsigned certificate. Make sure that you upload the certificate to the corresponding connected app.		KeyStoreParameters
lazyLogin (security)	If set to true prevents the component from authenticating to Salesforce with the start of the component. You would generally set this to the (default) false and authenticate early and be immediately aware of any authentication issues.	false	boolean
loginConfig (security)	All authentication configuration in one nested bean, all properties set there can be set directly on the component as well		SalesforceLoginConfig
loginUrl (security)	Required URL of the Salesforce instance used for authentication, by default set to https://login.salesforce.com	https://login.salesforce.com	String
password (security)	Password used in OAuth flow to gain access to access token. It’s easy to get started with password OAuth flow, but in general one should avoid it as it is deemed less secure than other flows. Make sure that you append security token to the end of the password if using one.		String
refreshToken (security)	Refresh token already obtained in the refresh token OAuth flow. One needs to setup a web application and configure a callback URL to receive the refresh token, or configure using the builtin callback at https://login.salesforce.com/services/oauth2/success or https://test.salesforce.com/services/oauth2/success and then retrive the refresh_token from the URL at the end of the flow. Note that in development organizations Salesforce allows hosting the callback web application at localhost.		String
sslContextParameters (security)	SSL parameters to use, see SSLContextParameters class for all available options.		SSLContextParameters
useGlobalSslContextParameters (security)	Enable usage of global SSL context parameters	false	boolean
userName (security)	Username used in OAuth flow to gain access to access token. It’s easy to get started with password OAuth flow, but in general one should avoid it as it is deemed less secure than other flows.		String

Name

Description

Default

Type

apexMethod (common)

APEX method name

String

apexQueryParams (common)

Query params for APEX method

Map

apexUrl (common)

APEX method URL

String

apiVersion (common)

Salesforce API version.

50.0

String

backoffIncrement (common)

Backoff interval increment for Streaming connection restart attempts for failures beyond CometD auto-reconnect.

1000

long

batchId (common)

Bulk API Batch ID

String

contentType (common)

Bulk API content type, one of XML, CSV, ZIP_XML, ZIP_CSV. There are 6 enums and the value can be one of: XML, CSV, JSON, ZIP_XML, ZIP_CSV, ZIP_JSON

ContentType

defaultReplayId (common)

Default replayId setting if no value is found in initialReplayIdMap

-1

Long

format (common)

Payload format to use for Salesforce API calls, either JSON or XML, defaults to JSON. There are 2 enums and the value can be one of: JSON, XML

PayloadFormat

httpClient (common)

Custom Jetty Http Client to use to connect to Salesforce.

SalesforceHttpClient

httpClientConnectionTimeout (common)

Connection timeout used by the HttpClient when connecting to the Salesforce server.

60000

long

httpClientIdleTimeout (common)

Timeout used by the HttpClient when waiting for response from the Salesforce server.

10000

long

httpMaxContentLength (common)

Max content length of an HTTP response.

Integer

httpRequestBufferSize (common)

HTTP request buffer size. May need to be increased for large SOQL queries.

8192

Integer

includeDetails (common)

Include details in Salesforce1 Analytics report, defaults to false.

Boolean

initialReplayIdMap (common)

Replay IDs to start from per channel name.

Map

instanceId (common)

Salesforce1 Analytics report execution instance ID

String

jobId (common)

Bulk API Job ID

String

limit (common)

Limit on number of returned records. Applicable to some of the API, check the Salesforce documentation.

Integer

maxBackoff (common)

Maximum backoff interval for Streaming connection restart attempts for failures beyond CometD auto-reconnect.

30000

long

notFoundBehaviour (common)

Sets the behaviour of 404 not found status received from Salesforce API. Should the body be set to NULL NotFoundBehaviour#NULL or should a exception be signaled on the exchange NotFoundBehaviour#EXCEPTION - the default. There are 2 enums and the value can be one of: EXCEPTION, NULL

EXCEPTION

NotFoundBehaviour

notifyForFields (common)

Notify for fields, options are ALL, REFERENCED, SELECT, WHERE. There are 4 enums and the value can be one of: ALL, REFERENCED, SELECT, WHERE

NotifyForFieldsEnum

notifyForOperationCreate (common)

Notify for create operation, defaults to false (API version = 29.0)

Boolean

notifyForOperationDelete (common)

Notify for delete operation, defaults to false (API version = 29.0)

Boolean

notifyForOperations (common)

Notify for operations, options are ALL, CREATE, EXTENDED, UPDATE (API version 29.0). There are 4 enums and the value can be one of: ALL, CREATE, EXTENDED, UPDATE

NotifyForOperationsEnum

notifyForOperationUndelete (common)

Notify for un-delete operation, defaults to false (API version = 29.0)

Boolean

notifyForOperationUpdate (common)

Notify for update operation, defaults to false (API version = 29.0)

Boolean

objectMapper (common)

Custom Jackson ObjectMapper to use when serializing/deserializing Salesforce objects.

ObjectMapper

packages (common)

In what packages are the generated DTO classes. Typically the classes would be generated using camel-salesforce-maven-plugin. This must be set if using the XML format. Also, set it if using the generated DTOs to gain the benefit of using short SObject names in parameters/header values. Multiple packages can be separated by comma.

String

rawPayload (common)

Use raw payload String for request and response (either JSON or XML depending on format), instead of DTOs, false by default

false

boolean

reportId (common)

Salesforce1 Analytics report Id

String

reportMetadata (common)

Salesforce1 Analytics report metadata for filtering

ReportMetadata

resultId (common)

Bulk API Result ID

String

sObjectBlobFieldName (common)

SObject blob field name

String

sObjectClass (common)

Fully qualified SObject class name, usually generated using camel-salesforce-maven-plugin

String

sObjectFields (common)

SObject fields to retrieve

String

sObjectId (common)

SObject ID if required by API

String

sObjectIdName (common)

SObject external ID field name

String

sObjectIdValue (common)

SObject external ID field value

String

sObjectName (common)

SObject name if required or supported by API

String

sObjectQuery (common)

Salesforce SOQL query string

String

sObjectSearch (common)

Salesforce SOSL search string

String

updateTopic (common)

Whether to update an existing Push Topic when using the Streaming API, defaults to false

false

boolean

config (common)

Global endpoint configuration - use to set values that are common to all endpoints

SalesforceEndpointConfig

httpClientProperties (common)

Used to set any properties that can be configured on the underlying HTTP client. Have a look at properties of SalesforceHttpClient and the Jetty HttpClient for all available options.

Map

longPollingTransportProperties (common)

Used to set any properties that can be configured on the LongPollingTransport used by the BayeuxClient (CometD) used by the streaming api

Map

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

httpProxyExcludedAddresses (proxy)

A list of addresses for which HTTP proxy server should not be used.

Set

httpProxyHost (proxy)

Hostname of the HTTP proxy server to use.

String

httpProxyIncludedAddresses (proxy)

A list of addresses for which HTTP proxy server should be used.

Set

httpProxyPort (proxy)

Port number of the HTTP proxy server to use.

Integer

httpProxySocks4 (proxy)

If set to true the configures the HTTP proxy to use as a SOCKS4 proxy.

false

boolean

authenticationType (security)

Explicit authentication method to be used, one of USERNAME_PASSWORD, REFRESH_TOKEN or JWT. Salesforce component can auto-determine the authentication method to use from the properties set, set this property to eliminate any ambiguity. There are 3 enums and the value can be one of: USERNAME_PASSWORD, REFRESH_TOKEN, JWT

AuthenticationType

clientId (security)

Required OAuth Consumer Key of the connected app configured in the Salesforce instance setup. Typically a connected app needs to be configured but one can be provided by installing a package.

String

clientSecret (security)

OAuth Consumer Secret of the connected app configured in the Salesforce instance setup.

String

httpProxyAuthUri (security)

Used in authentication against the HTTP proxy server, needs to match the URI of the proxy server in order for the httpProxyUsername and httpProxyPassword to be used for authentication.

String

httpProxyPassword (security)

Password to use to authenticate against the HTTP proxy server.

String

httpProxyRealm (security)

Realm of the proxy server, used in preemptive Basic/Digest authentication methods against the HTTP proxy server.

String

httpProxySecure (security)

If set to false disables the use of TLS when accessing the HTTP proxy.

true

boolean

httpProxyUseDigestAuth (security)

If set to true Digest authentication will be used when authenticating to the HTTP proxy, otherwise Basic authorization method will be used

false

boolean

httpProxyUsername (security)

Username to use to authenticate against the HTTP proxy server.

String

instanceUrl (security)

URL of the Salesforce instance used after authentication, by default received from Salesforce on successful authentication

String

keystore (security)

KeyStore parameters to use in OAuth JWT flow. The KeyStore should contain only one entry with private key and certificate. Salesforce does not verify the certificate chain, so this can easily be a selfsigned certificate. Make sure that you upload the certificate to the corresponding connected app.

KeyStoreParameters

lazyLogin (security)

If set to true prevents the component from authenticating to Salesforce with the start of the component. You would generally set this to the (default) false and authenticate early and be immediately aware of any authentication issues.

false

boolean

loginConfig (security)

All authentication configuration in one nested bean, all properties set there can be set directly on the component as well

SalesforceLoginConfig

loginUrl (security)

Required URL of the Salesforce instance used for authentication, by default set to https://login.salesforce.com

https://login.salesforce.com

String

password (security)

Password used in OAuth flow to gain access to access token. It’s easy to get started with password OAuth flow, but in general one should avoid it as it is deemed less secure than other flows. Make sure that you append security token to the end of the password if using one.

String

refreshToken (security)

Refresh token already obtained in the refresh token OAuth flow. One needs to setup a web application and configure a callback URL to receive the refresh token, or configure using the builtin callback at https://login.salesforce.com/services/oauth2/success or https://test.salesforce.com/services/oauth2/success and then retrive the refresh_token from the URL at the end of the flow. Note that in development organizations Salesforce allows hosting the callback web application at localhost.

String

sslContextParameters (security)

SSL parameters to use, see SSLContextParameters class for all available options.

SSLContextParameters

useGlobalSslContextParameters (security)

Enable usage of global SSL context parameters

false

boolean

userName (security)

Username used in OAuth flow to gain access to access token. It’s easy to get started with password OAuth flow, but in general one should avoid it as it is deemed less secure than other flows.

String

The Salesforce endpoint is configured using URI syntax:

salesforce:operationName:topicName

with the following path and query parameters:

Path Parameters (2 parameters):

Name	Description	Default	Type
operationName	The operation to use. There are 43 enums and the value can be one of: getVersions, getResources, getGlobalObjects, getBasicInfo, getDescription, getSObject, createSObject, updateSObject, deleteSObject, getSObjectWithId, upsertSObject, deleteSObjectWithId, getBlobField, query, queryMore, queryAll, search, apexCall, recent, createJob, getJob, closeJob, abortJob, createBatch, getBatch, getAllBatches, getRequest, getResults, createBatchQuery, getQueryResultIds, getQueryResult, getRecentReports, getReportDescription, executeSyncReport, executeAsyncReport, getReportInstances, getReportResults, limits, approval, approvals, composite-tree, composite-batch, composite		OperationName
topicName	The name of the topic/channel to use		String

Name

Description

Default

Type

operationName

The operation to use. There are 43 enums and the value can be one of: getVersions, getResources, getGlobalObjects, getBasicInfo, getDescription, getSObject, createSObject, updateSObject, deleteSObject, getSObjectWithId, upsertSObject, deleteSObjectWithId, getBlobField, query, queryMore, queryAll, search, apexCall, recent, createJob, getJob, closeJob, abortJob, createBatch, getBatch, getAllBatches, getRequest, getResults, createBatchQuery, getQueryResultIds, getQueryResult, getRecentReports, getReportDescription, executeSyncReport, executeAsyncReport, getReportInstances, getReportResults, limits, approval, approvals, composite-tree, composite-batch, composite

OperationName

topicName

The name of the topic/channel to use

String

Query Parameters (44 parameters):

Name	Description	Default	Type
apexMethod (common)	APEX method name		String
apexQueryParams (common)	Query params for APEX method		Map
apexUrl (common)	APEX method URL		String
apiVersion (common)	Salesforce API version.	50.0	String
backoffIncrement (common)	Backoff interval increment for Streaming connection restart attempts for failures beyond CometD auto-reconnect.	1000	long
batchId (common)	Bulk API Batch ID		String
contentType (common)	Bulk API content type, one of XML, CSV, ZIP_XML, ZIP_CSV. There are 6 enums and the value can be one of: XML, CSV, JSON, ZIP_XML, ZIP_CSV, ZIP_JSON		ContentType
defaultReplayId (common)	Default replayId setting if no value is found in initialReplayIdMap	-1	Long
format (common)	Payload format to use for Salesforce API calls, either JSON or XML, defaults to JSON. There are 2 enums and the value can be one of: JSON, XML		PayloadFormat
httpClient (common)	Custom Jetty Http Client to use to connect to Salesforce.		SalesforceHttpClient
includeDetails (common)	Include details in Salesforce1 Analytics report, defaults to false.		Boolean
initialReplayIdMap (common)	Replay IDs to start from per channel name.		Map
instanceId (common)	Salesforce1 Analytics report execution instance ID		String
jobId (common)	Bulk API Job ID		String
limit (common)	Limit on number of returned records. Applicable to some of the API, check the Salesforce documentation.		Integer
maxBackoff (common)	Maximum backoff interval for Streaming connection restart attempts for failures beyond CometD auto-reconnect.	30000	long
notFoundBehaviour (common)	Sets the behaviour of 404 not found status received from Salesforce API. Should the body be set to NULL NotFoundBehaviour#NULL or should a exception be signaled on the exchange NotFoundBehaviour#EXCEPTION - the default. There are 2 enums and the value can be one of: EXCEPTION, NULL	EXCEPTION	NotFoundBehaviour
notifyForFields (common)	Notify for fields, options are ALL, REFERENCED, SELECT, WHERE. There are 4 enums and the value can be one of: ALL, REFERENCED, SELECT, WHERE		NotifyForFieldsEnum
notifyForOperationCreate (common)	Notify for create operation, defaults to false (API version = 29.0)		Boolean
notifyForOperationDelete (common)	Notify for delete operation, defaults to false (API version = 29.0)		Boolean
notifyForOperations (common)	Notify for operations, options are ALL, CREATE, EXTENDED, UPDATE (API version 29.0). There are 4 enums and the value can be one of: ALL, CREATE, EXTENDED, UPDATE		NotifyForOperationsEnum
notifyForOperationUndelete (common)	Notify for un-delete operation, defaults to false (API version = 29.0)		Boolean
notifyForOperationUpdate (common)	Notify for update operation, defaults to false (API version = 29.0)		Boolean
objectMapper (common)	Custom Jackson ObjectMapper to use when serializing/deserializing Salesforce objects.		ObjectMapper
rawPayload (common)	Use raw payload String for request and response (either JSON or XML depending on format), instead of DTOs, false by default	false	boolean
reportId (common)	Salesforce1 Analytics report Id		String
reportMetadata (common)	Salesforce1 Analytics report metadata for filtering		ReportMetadata
resultId (common)	Bulk API Result ID		String
sObjectBlobFieldName (common)	SObject blob field name		String
sObjectClass (common)	Fully qualified SObject class name, usually generated using camel-salesforce-maven-plugin		String
sObjectFields (common)	SObject fields to retrieve		String
sObjectId (common)	SObject ID if required by API		String
sObjectIdName (common)	SObject external ID field name		String
sObjectIdValue (common)	SObject external ID field value		String
sObjectName (common)	SObject name if required or supported by API		String
sObjectQuery (common)	Salesforce SOQL query string		String
sObjectSearch (common)	Salesforce SOSL search string		String
updateTopic (common)	Whether to update an existing Push Topic when using the Streaming API, defaults to false	false	boolean
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
replayId (consumer)	The replayId value to use when subscribing		Long
exceptionHandler (consumer)	To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.		ExceptionHandler
exchangePattern (consumer)	Sets the exchange pattern when the consumer creates an exchange. There are 3 enums and the value can be one of: InOnly, InOut, InOptionalOut		ExchangePattern
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
synchronous (advanced)	Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).	false	boolean

Name

Description

Default

Type

apexMethod (common)

APEX method name

String

apexQueryParams (common)

Query params for APEX method

Map

apexUrl (common)

APEX method URL

String

apiVersion (common)

Salesforce API version.

50.0

String

backoffIncrement (common)

Backoff interval increment for Streaming connection restart attempts for failures beyond CometD auto-reconnect.

1000

long

batchId (common)

Bulk API Batch ID

String

contentType (common)

Bulk API content type, one of XML, CSV, ZIP_XML, ZIP_CSV. There are 6 enums and the value can be one of: XML, CSV, JSON, ZIP_XML, ZIP_CSV, ZIP_JSON

ContentType

defaultReplayId (common)

Default replayId setting if no value is found in initialReplayIdMap

-1

Long

format (common)

Payload format to use for Salesforce API calls, either JSON or XML, defaults to JSON. There are 2 enums and the value can be one of: JSON, XML

PayloadFormat

httpClient (common)

Custom Jetty Http Client to use to connect to Salesforce.

SalesforceHttpClient

includeDetails (common)

Include details in Salesforce1 Analytics report, defaults to false.

Boolean

initialReplayIdMap (common)

Replay IDs to start from per channel name.

Map

instanceId (common)

Salesforce1 Analytics report execution instance ID

String

jobId (common)

Bulk API Job ID

String

limit (common)

Limit on number of returned records. Applicable to some of the API, check the Salesforce documentation.

Integer

maxBackoff (common)

Maximum backoff interval for Streaming connection restart attempts for failures beyond CometD auto-reconnect.

30000

long

notFoundBehaviour (common)

EXCEPTION

NotFoundBehaviour

notifyForFields (common)

Notify for fields, options are ALL, REFERENCED, SELECT, WHERE. There are 4 enums and the value can be one of: ALL, REFERENCED, SELECT, WHERE

NotifyForFieldsEnum

notifyForOperationCreate (common)

Notify for create operation, defaults to false (API version = 29.0)

Boolean

notifyForOperationDelete (common)

Notify for delete operation, defaults to false (API version = 29.0)

Boolean

notifyForOperations (common)

Notify for operations, options are ALL, CREATE, EXTENDED, UPDATE (API version 29.0). There are 4 enums and the value can be one of: ALL, CREATE, EXTENDED, UPDATE

NotifyForOperationsEnum

notifyForOperationUndelete (common)

Notify for un-delete operation, defaults to false (API version = 29.0)

Boolean

notifyForOperationUpdate (common)

Notify for update operation, defaults to false (API version = 29.0)

Boolean

objectMapper (common)

Custom Jackson ObjectMapper to use when serializing/deserializing Salesforce objects.

ObjectMapper

rawPayload (common)

Use raw payload String for request and response (either JSON or XML depending on format), instead of DTOs, false by default

false

boolean

reportId (common)

Salesforce1 Analytics report Id

String

reportMetadata (common)

Salesforce1 Analytics report metadata for filtering

ReportMetadata

resultId (common)

Bulk API Result ID

String

sObjectBlobFieldName (common)

SObject blob field name

String

sObjectClass (common)

Fully qualified SObject class name, usually generated using camel-salesforce-maven-plugin

String

sObjectFields (common)

SObject fields to retrieve

String

sObjectId (common)

SObject ID if required by API

String

sObjectIdName (common)

SObject external ID field name

String

sObjectIdValue (common)

SObject external ID field value

String

sObjectName (common)

SObject name if required or supported by API

String

sObjectQuery (common)

Salesforce SOQL query string

String

sObjectSearch (common)

Salesforce SOSL search string

String

updateTopic (common)

Whether to update an existing Push Topic when using the Streaming API, defaults to false

false

boolean

bridgeErrorHandler (consumer)

false

boolean

replayId (consumer)

The replayId value to use when subscribing

Long

exceptionHandler (consumer)

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer)

Sets the exchange pattern when the consumer creates an exchange. There are 3 enums and the value can be one of: InOnly, InOut, InOptionalOut

ExchangePattern

lazyStartProducer (producer)

false

boolean

synchronous (advanced)

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

boolean

Spring Boot Auto-Configuration

When using salesforce with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-salesforce-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 74 options, which are listed below.

Name	Description	Default	Type
camel.component.salesforce.apex-method	APEX method name		String
camel.component.salesforce.apex-query-params	Query params for APEX method		Map
camel.component.salesforce.apex-url	APEX method URL		String
camel.component.salesforce.api-version	Salesforce API version.	50.0	String
camel.component.salesforce.authentication-type	Explicit authentication method to be used, one of USERNAME_PASSWORD, REFRESH_TOKEN or JWT. Salesforce component can auto-determine the authentication method to use from the properties set, set this property to eliminate any ambiguity.		AuthenticationType
camel.component.salesforce.autowired-enabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	Boolean
camel.component.salesforce.backoff-increment	Backoff interval increment for Streaming connection restart attempts for failures beyond CometD auto-reconnect. The option is a long type.	1000	Long
camel.component.salesforce.batch-id	Bulk API Batch ID		String
camel.component.salesforce.bridge-error-handler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	Boolean
camel.component.salesforce.client-id	OAuth Consumer Key of the connected app configured in the Salesforce instance setup. Typically a connected app needs to be configured but one can be provided by installing a package.		String
camel.component.salesforce.client-secret	OAuth Consumer Secret of the connected app configured in the Salesforce instance setup.		String
camel.component.salesforce.config	Global endpoint configuration - use to set values that are common to all endpoints. The option is a org.apache.camel.component.salesforce.SalesforceEndpointConfig type.		SalesforceEndpointConfig
camel.component.salesforce.content-type	Bulk API content type, one of XML, CSV, ZIP_XML, ZIP_CSV		ContentType
camel.component.salesforce.default-replay-id	Default replayId setting if no value is found in initialReplayIdMap	-1	Long
camel.component.salesforce.enabled	Whether to enable auto configuration of the salesforce component. This is enabled by default.		Boolean
camel.component.salesforce.format	Payload format to use for Salesforce API calls, either JSON or XML, defaults to JSON		PayloadFormat
camel.component.salesforce.http-client	Custom Jetty Http Client to use to connect to Salesforce. The option is a org.apache.camel.component.salesforce.SalesforceHttpClient type.		SalesforceHttpClient
camel.component.salesforce.http-client-connection-timeout	Connection timeout used by the HttpClient when connecting to the Salesforce server.	60000	Long
camel.component.salesforce.http-client-idle-timeout	Timeout used by the HttpClient when waiting for response from the Salesforce server.	10000	Long
camel.component.salesforce.http-client-properties	Used to set any properties that can be configured on the underlying HTTP client. Have a look at properties of SalesforceHttpClient and the Jetty HttpClient for all available options.		Map
camel.component.salesforce.http-max-content-length	Max content length of an HTTP response.		Integer
camel.component.salesforce.http-proxy-auth-uri	Used in authentication against the HTTP proxy server, needs to match the URI of the proxy server in order for the httpProxyUsername and httpProxyPassword to be used for authentication.		String
camel.component.salesforce.http-proxy-excluded-addresses	A list of addresses for which HTTP proxy server should not be used.		Set
camel.component.salesforce.http-proxy-host	Hostname of the HTTP proxy server to use.		String
camel.component.salesforce.http-proxy-included-addresses	A list of addresses for which HTTP proxy server should be used.		Set
camel.component.salesforce.http-proxy-password	Password to use to authenticate against the HTTP proxy server.		String
camel.component.salesforce.http-proxy-port	Port number of the HTTP proxy server to use.		Integer
camel.component.salesforce.http-proxy-realm	Realm of the proxy server, used in preemptive Basic/Digest authentication methods against the HTTP proxy server.		String
camel.component.salesforce.http-proxy-secure	If set to false disables the use of TLS when accessing the HTTP proxy.	true	Boolean
camel.component.salesforce.http-proxy-socks4	If set to true the configures the HTTP proxy to use as a SOCKS4 proxy.	false	Boolean
camel.component.salesforce.http-proxy-use-digest-auth	If set to true Digest authentication will be used when authenticating to the HTTP proxy, otherwise Basic authorization method will be used	false	Boolean
camel.component.salesforce.http-proxy-username	Username to use to authenticate against the HTTP proxy server.		String
camel.component.salesforce.http-request-buffer-size	HTTP request buffer size. May need to be increased for large SOQL queries.	8192	Integer
camel.component.salesforce.include-details	Include details in Salesforce1 Analytics report, defaults to false.		Boolean
camel.component.salesforce.initial-replay-id-map	Replay IDs to start from per channel name.		Map
camel.component.salesforce.instance-id	Salesforce1 Analytics report execution instance ID		String
camel.component.salesforce.instance-url	URL of the Salesforce instance used after authentication, by default received from Salesforce on successful authentication		String
camel.component.salesforce.job-id	Bulk API Job ID		String
camel.component.salesforce.keystore	KeyStore parameters to use in OAuth JWT flow. The KeyStore should contain only one entry with private key and certificate. Salesforce does not verify the certificate chain, so this can easily be a selfsigned certificate. Make sure that you upload the certificate to the corresponding connected app. The option is a org.apache.camel.support.jsse.KeyStoreParameters type.		KeyStoreParameters
camel.component.salesforce.lazy-login	If set to true prevents the component from authenticating to Salesforce with the start of the component. You would generally set this to the (default) false and authenticate early and be immediately aware of any authentication issues.	false	Boolean
camel.component.salesforce.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.salesforce.limit	Limit on number of returned records. Applicable to some of the API, check the Salesforce documentation.		Integer
camel.component.salesforce.login-config	All authentication configuration in one nested bean, all properties set there can be set directly on the component as well. The option is a org.apache.camel.component.salesforce.SalesforceLoginConfig type.		SalesforceLoginConfig
camel.component.salesforce.login-url	URL of the Salesforce instance used for authentication, by default set to https://login.salesforce.com	https://login.salesforce.com	String
camel.component.salesforce.long-polling-transport-properties	Used to set any properties that can be configured on the LongPollingTransport used by the BayeuxClient (CometD) used by the streaming api		Map
camel.component.salesforce.max-backoff	Maximum backoff interval for Streaming connection restart attempts for failures beyond CometD auto-reconnect. The option is a long type.	30000	Long
camel.component.salesforce.not-found-behaviour	Sets the behaviour of 404 not found status received from Salesforce API. Should the body be set to NULL NotFoundBehaviour#NULL or should a exception be signaled on the exchange NotFoundBehaviour#EXCEPTION - the default.		NotFoundBehaviour
camel.component.salesforce.notify-for-fields	Notify for fields, options are ALL, REFERENCED, SELECT, WHERE		NotifyForFieldsEnum
camel.component.salesforce.notify-for-operation-create	Notify for create operation, defaults to false (API version = 29.0)		Boolean
camel.component.salesforce.notify-for-operation-delete	Notify for delete operation, defaults to false (API version = 29.0)		Boolean
camel.component.salesforce.notify-for-operation-undelete	Notify for un-delete operation, defaults to false (API version = 29.0)		Boolean
camel.component.salesforce.notify-for-operation-update	Notify for update operation, defaults to false (API version = 29.0)		Boolean
camel.component.salesforce.notify-for-operations	Notify for operations, options are ALL, CREATE, EXTENDED, UPDATE (API version 29.0)		NotifyForOperationsEnum
camel.component.salesforce.object-mapper	Custom Jackson ObjectMapper to use when serializing/deserializing Salesforce objects. The option is a com.fasterxml.jackson.databind.ObjectMapper type.		ObjectMapper
camel.component.salesforce.packages	In what packages are the generated DTO classes. Typically the classes would be generated using camel-salesforce-maven-plugin. This must be set if using the XML format. Also, set it if using the generated DTOs to gain the benefit of using short SObject names in parameters/header values. Multiple packages can be separated by comma.		String
camel.component.salesforce.password	Password used in OAuth flow to gain access to access token. It’s easy to get started with password OAuth flow, but in general one should avoid it as it is deemed less secure than other flows. Make sure that you append security token to the end of the password if using one.		String
camel.component.salesforce.raw-payload	Use raw payload String for request and response (either JSON or XML depending on format), instead of DTOs, false by default	false	Boolean
camel.component.salesforce.refresh-token	Refresh token already obtained in the refresh token OAuth flow. One needs to setup a web application and configure a callback URL to receive the refresh token, or configure using the builtin callback at https://login.salesforce.com/services/oauth2/success or https://test.salesforce.com/services/oauth2/success and then retrive the refresh_token from the URL at the end of the flow. Note that in development organizations Salesforce allows hosting the callback web application at localhost.		String
camel.component.salesforce.report-id	Salesforce1 Analytics report Id		String
camel.component.salesforce.report-metadata	Salesforce1 Analytics report metadata for filtering. The option is a org.apache.camel.component.salesforce.api.dto.analytics.reports.ReportMetadata type.		ReportMetadata
camel.component.salesforce.result-id	Bulk API Result ID		String
camel.component.salesforce.s-object-blob-field-name	SObject blob field name		String
camel.component.salesforce.s-object-class	Fully qualified SObject class name, usually generated using camel-salesforce-maven-plugin		String
camel.component.salesforce.s-object-fields	SObject fields to retrieve		String
camel.component.salesforce.s-object-id	SObject ID if required by API		String
camel.component.salesforce.s-object-id-name	SObject external ID field name		String
camel.component.salesforce.s-object-id-value	SObject external ID field value		String
camel.component.salesforce.s-object-name	SObject name if required or supported by API		String
camel.component.salesforce.s-object-query	Salesforce SOQL query string		String
camel.component.salesforce.s-object-search	Salesforce SOSL search string		String
camel.component.salesforce.ssl-context-parameters	SSL parameters to use, see SSLContextParameters class for all available options. The option is a org.apache.camel.support.jsse.SSLContextParameters type.		SSLContextParameters
camel.component.salesforce.update-topic	Whether to update an existing Push Topic when using the Streaming API, defaults to false	false	Boolean
camel.component.salesforce.use-global-ssl-context-parameters	Enable usage of global SSL context parameters	false	Boolean
camel.component.salesforce.user-name	Username used in OAuth flow to gain access to access token. It’s easy to get started with password OAuth flow, but in general one should avoid it as it is deemed less secure than other flows.		String

Name

Description

Default

Type

camel.component.salesforce.apex-method

APEX method name

String

camel.component.salesforce.apex-query-params

Query params for APEX method

Map

camel.component.salesforce.apex-url

APEX method URL

String

camel.component.salesforce.api-version

Salesforce API version.

50.0

String

camel.component.salesforce.authentication-type

AuthenticationType

camel.component.salesforce.autowired-enabled

true

Boolean

camel.component.salesforce.backoff-increment

Backoff interval increment for Streaming connection restart attempts for failures beyond CometD auto-reconnect. The option is a long type.

1000

Long

camel.component.salesforce.batch-id

Bulk API Batch ID

String

camel.component.salesforce.bridge-error-handler

false

Boolean

camel.component.salesforce.client-id

OAuth Consumer Key of the connected app configured in the Salesforce instance setup. Typically a connected app needs to be configured but one can be provided by installing a package.

String

camel.component.salesforce.client-secret

OAuth Consumer Secret of the connected app configured in the Salesforce instance setup.

String

camel.component.salesforce.config

Global endpoint configuration - use to set values that are common to all endpoints. The option is a org.apache.camel.component.salesforce.SalesforceEndpointConfig type.

SalesforceEndpointConfig

camel.component.salesforce.content-type

Bulk API content type, one of XML, CSV, ZIP_XML, ZIP_CSV

ContentType

camel.component.salesforce.default-replay-id

Default replayId setting if no value is found in initialReplayIdMap

-1

Long

camel.component.salesforce.enabled

Whether to enable auto configuration of the salesforce component. This is enabled by default.

Boolean

camel.component.salesforce.format

Payload format to use for Salesforce API calls, either JSON or XML, defaults to JSON

PayloadFormat

camel.component.salesforce.http-client

Custom Jetty Http Client to use to connect to Salesforce. The option is a org.apache.camel.component.salesforce.SalesforceHttpClient type.

SalesforceHttpClient

camel.component.salesforce.http-client-connection-timeout

Connection timeout used by the HttpClient when connecting to the Salesforce server.

60000

Long

camel.component.salesforce.http-client-idle-timeout

Timeout used by the HttpClient when waiting for response from the Salesforce server.

10000

Long

camel.component.salesforce.http-client-properties

Used to set any properties that can be configured on the underlying HTTP client. Have a look at properties of SalesforceHttpClient and the Jetty HttpClient for all available options.

Map

camel.component.salesforce.http-max-content-length

Max content length of an HTTP response.

Integer

camel.component.salesforce.http-proxy-auth-uri

Used in authentication against the HTTP proxy server, needs to match the URI of the proxy server in order for the httpProxyUsername and httpProxyPassword to be used for authentication.

String

camel.component.salesforce.http-proxy-excluded-addresses

A list of addresses for which HTTP proxy server should not be used.

Set

camel.component.salesforce.http-proxy-host

Hostname of the HTTP proxy server to use.

String

camel.component.salesforce.http-proxy-included-addresses

A list of addresses for which HTTP proxy server should be used.

Set

camel.component.salesforce.http-proxy-password

Password to use to authenticate against the HTTP proxy server.

String

camel.component.salesforce.http-proxy-port

Port number of the HTTP proxy server to use.

Integer

camel.component.salesforce.http-proxy-realm

Realm of the proxy server, used in preemptive Basic/Digest authentication methods against the HTTP proxy server.

String

camel.component.salesforce.http-proxy-secure

If set to false disables the use of TLS when accessing the HTTP proxy.

true

Boolean

camel.component.salesforce.http-proxy-socks4

If set to true the configures the HTTP proxy to use as a SOCKS4 proxy.

false

Boolean

camel.component.salesforce.http-proxy-use-digest-auth

If set to true Digest authentication will be used when authenticating to the HTTP proxy, otherwise Basic authorization method will be used

false

Boolean

camel.component.salesforce.http-proxy-username

Username to use to authenticate against the HTTP proxy server.

String

camel.component.salesforce.http-request-buffer-size

HTTP request buffer size. May need to be increased for large SOQL queries.

8192

Integer

camel.component.salesforce.include-details

Include details in Salesforce1 Analytics report, defaults to false.

Boolean

camel.component.salesforce.initial-replay-id-map

Replay IDs to start from per channel name.

Map

camel.component.salesforce.instance-id

Salesforce1 Analytics report execution instance ID

String

camel.component.salesforce.instance-url

URL of the Salesforce instance used after authentication, by default received from Salesforce on successful authentication

String

camel.component.salesforce.job-id

Bulk API Job ID

String

camel.component.salesforce.keystore

KeyStoreParameters

camel.component.salesforce.lazy-login

false

Boolean

camel.component.salesforce.lazy-start-producer

false

Boolean

camel.component.salesforce.limit

Limit on number of returned records. Applicable to some of the API, check the Salesforce documentation.

Integer

camel.component.salesforce.login-config

All authentication configuration in one nested bean, all properties set there can be set directly on the component as well. The option is a org.apache.camel.component.salesforce.SalesforceLoginConfig type.

SalesforceLoginConfig

camel.component.salesforce.login-url

URL of the Salesforce instance used for authentication, by default set to https://login.salesforce.com

https://login.salesforce.com

String

camel.component.salesforce.long-polling-transport-properties

Used to set any properties that can be configured on the LongPollingTransport used by the BayeuxClient (CometD) used by the streaming api

Map

camel.component.salesforce.max-backoff

Maximum backoff interval for Streaming connection restart attempts for failures beyond CometD auto-reconnect. The option is a long type.

30000

Long

camel.component.salesforce.not-found-behaviour

NotFoundBehaviour

camel.component.salesforce.notify-for-fields

Notify for fields, options are ALL, REFERENCED, SELECT, WHERE

NotifyForFieldsEnum

camel.component.salesforce.notify-for-operation-create

Notify for create operation, defaults to false (API version = 29.0)

Boolean

camel.component.salesforce.notify-for-operation-delete

Notify for delete operation, defaults to false (API version = 29.0)

Boolean

camel.component.salesforce.notify-for-operation-undelete

Notify for un-delete operation, defaults to false (API version = 29.0)

Boolean

camel.component.salesforce.notify-for-operation-update

Notify for update operation, defaults to false (API version = 29.0)

Boolean

camel.component.salesforce.notify-for-operations

Notify for operations, options are ALL, CREATE, EXTENDED, UPDATE (API version 29.0)

NotifyForOperationsEnum

camel.component.salesforce.object-mapper

Custom Jackson ObjectMapper to use when serializing/deserializing Salesforce objects. The option is a com.fasterxml.jackson.databind.ObjectMapper type.

ObjectMapper

camel.component.salesforce.packages

String

camel.component.salesforce.password

String

camel.component.salesforce.raw-payload

Use raw payload String for request and response (either JSON or XML depending on format), instead of DTOs, false by default

false

Boolean

camel.component.salesforce.refresh-token

String

camel.component.salesforce.report-id

Salesforce1 Analytics report Id

String

camel.component.salesforce.report-metadata

Salesforce1 Analytics report metadata for filtering. The option is a org.apache.camel.component.salesforce.api.dto.analytics.reports.ReportMetadata type.

ReportMetadata

camel.component.salesforce.result-id

Bulk API Result ID

String

camel.component.salesforce.s-object-blob-field-name

SObject blob field name

String

camel.component.salesforce.s-object-class

Fully qualified SObject class name, usually generated using camel-salesforce-maven-plugin

String

camel.component.salesforce.s-object-fields

SObject fields to retrieve

String

camel.component.salesforce.s-object-id

SObject ID if required by API

String

camel.component.salesforce.s-object-id-name

SObject external ID field name

String

camel.component.salesforce.s-object-id-value

SObject external ID field value

String

camel.component.salesforce.s-object-name

SObject name if required or supported by API

String

camel.component.salesforce.s-object-query

Salesforce SOQL query string

String

camel.component.salesforce.s-object-search

Salesforce SOSL search string

String

camel.component.salesforce.ssl-context-parameters

SSL parameters to use, see SSLContextParameters class for all available options. The option is a org.apache.camel.support.jsse.SSLContextParameters type.

SSLContextParameters

camel.component.salesforce.update-topic

Whether to update an existing Push Topic when using the Streaming API, defaults to false

false

Boolean

camel.component.salesforce.use-global-ssl-context-parameters

Enable usage of global SSL context parameters

false

Boolean

camel.component.salesforce.user-name

Username used in OAuth flow to gain access to access token. It’s easy to get started with password OAuth flow, but in general one should avoid it as it is deemed less secure than other flows.

String