Etcd Stats

Since Camel 2.18

Both producer and consumer are supported

Since Camel 2.18

The camel Etcd component allows you to work with Etcd, a distributed reliable key-value store.

URI Format

etcd-stats:path[?options]

URI Options

The Etcd Stats component supports 15 options, which are listed below.

Name Description Default Type

configuration (common)

Component configuration.

EtcdConfiguration

recursive (common)

To apply an action recursively.

false

boolean

servicePath (common)

The path to look for for service discovery

/services/

String

timeout (common)

To set the maximum time an action could take to complete.

Long

uris (common)

To set the URIs the client connects.

http://localhost:2379,http://localhost:4001

String

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

sendEmptyExchangeOnTimeout (consumer)

To send an empty message in case of timeout watching for a key.

false

boolean

fromIndex (consumer)

The index to watch from

0

long

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

timeToLive (producer)

To set the lifespan of a key in milliseconds.

Integer

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

password (security)

The password to use for basic authentication.

String

sslContextParameters (security)

To configure security using SSLContextParameters.

SSLContextParameters

useGlobalSslContextParameters (security)

Enable usage of global SSL context parameters.

false

boolean

userName (security)

The user name to use for basic authentication.

String

The Etcd Stats endpoint is configured using URI syntax:

etcd-stats:path

with the following path and query parameters:

Path Parameters (1 parameters):

Name Description Default Type

path

The path the endpoint refers to

String

Query Parameters (31 parameters):

Name Description Default Type

recursive (common)

To apply an action recursively.

false

boolean

servicePath (common)

The path to look for for service discovery

/services/

String

timeout (common)

To set the maximum time an action could take to complete.

Long

uris (common)

To set the URIs the client connects.

http://localhost:2379,http://localhost:4001

String

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

sendEmptyExchangeOnTimeout (consumer)

To send an empty message in case of timeout watching for a key.

false

boolean

sendEmptyMessageWhenIdle (consumer)

If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead.

false

boolean

exceptionHandler (consumer)

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer)

Sets the exchange pattern when the consumer creates an exchange. There are 3 enums and the value can be one of: InOnly, InOut, InOptionalOut

ExchangePattern

fromIndex (consumer)

The index to watch from

0

long

pollStrategy (consumer)

A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel.

PollingConsumerPollStrategy

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

timeToLive (producer)

To set the lifespan of a key in milliseconds.

Integer

synchronous (advanced)

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

boolean

backoffErrorThreshold (scheduler)

The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in.

int

backoffIdleThreshold (scheduler)

The number of subsequent idle polls that should happen before the backoffMultipler should kick-in.

int

backoffMultiplier (scheduler)

To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured.

int

delay (scheduler)

Milliseconds before the next poll.

500

long

greedy (scheduler)

If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages.

false

boolean

initialDelay (scheduler)

Milliseconds before the first poll starts.

1000

long

repeatCount (scheduler)

Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever.

0

long

runLoggingLevel (scheduler)

The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that. There are 6 enums and the value can be one of: TRACE, DEBUG, INFO, WARN, ERROR, OFF

TRACE

LoggingLevel

scheduledExecutorService (scheduler)

Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool.

ScheduledExecutorService

scheduler (scheduler)

To use a cron scheduler from either camel-spring or camel-quartz component. Use value spring or quartz for built in scheduler

none

Object

schedulerProperties (scheduler)

To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler.

Map

startScheduler (scheduler)

Whether the scheduler should be auto started.

true

boolean

timeUnit (scheduler)

Time unit for initialDelay and delay options. There are 7 enums and the value can be one of: NANOSECONDS, MICROSECONDS, MILLISECONDS, SECONDS, MINUTES, HOURS, DAYS

MILLISECONDS

TimeUnit

useFixedDelay (scheduler)

Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details.

true

boolean

password (security)

The password to use for basic authentication.

String

sslContextParameters (security)

To configure security using SSLContextParameters.

SSLContextParameters

userName (security)

The user name to use for basic authentication.

String

Spring Boot Auto-Configuration

When using etcd with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-etcd-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 43 options, which are listed below.

Name Description Default Type

camel.component.etcd-keys.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.etcd-keys.configuration

Component configuration. The option is a org.apache.camel.component.etcd.EtcdConfiguration type.

EtcdConfiguration

camel.component.etcd-keys.enabled

Whether to enable auto configuration of the etcd-keys component. This is enabled by default.

Boolean

camel.component.etcd-keys.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.etcd-keys.password

The password to use for basic authentication.

String

camel.component.etcd-keys.recursive

To apply an action recursively.

false

Boolean

camel.component.etcd-keys.service-path

The path to look for for service discovery

/services/

String

camel.component.etcd-keys.ssl-context-parameters

To configure security using SSLContextParameters. The option is a org.apache.camel.support.jsse.SSLContextParameters type.

SSLContextParameters

camel.component.etcd-keys.time-to-live

To set the lifespan of a key in milliseconds.

Integer

camel.component.etcd-keys.timeout

To set the maximum time an action could take to complete. The option is a java.lang.Long type.

Long

camel.component.etcd-keys.uris

To set the URIs the client connects.

http://localhost:2379,http://localhost:4001

String

camel.component.etcd-keys.use-global-ssl-context-parameters

Enable usage of global SSL context parameters.

false

Boolean

camel.component.etcd-keys.user-name

The user name to use for basic authentication.

String

camel.component.etcd-stats.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.etcd-stats.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.etcd-stats.configuration

Component configuration. The option is a org.apache.camel.component.etcd.EtcdConfiguration type.

EtcdConfiguration

camel.component.etcd-stats.enabled

Whether to enable auto configuration of the etcd-stats component. This is enabled by default.

Boolean

camel.component.etcd-stats.from-index

The index to watch from

0

Long

camel.component.etcd-stats.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.etcd-stats.password

The password to use for basic authentication.

String

camel.component.etcd-stats.recursive

To apply an action recursively.

false

Boolean

camel.component.etcd-stats.send-empty-exchange-on-timeout

To send an empty message in case of timeout watching for a key.

false

Boolean

camel.component.etcd-stats.service-path

The path to look for for service discovery

/services/

String

camel.component.etcd-stats.ssl-context-parameters

To configure security using SSLContextParameters. The option is a org.apache.camel.support.jsse.SSLContextParameters type.

SSLContextParameters

camel.component.etcd-stats.time-to-live

To set the lifespan of a key in milliseconds.

Integer

camel.component.etcd-stats.timeout

To set the maximum time an action could take to complete. The option is a java.lang.Long type.

Long

camel.component.etcd-stats.uris

To set the URIs the client connects.

http://localhost:2379,http://localhost:4001

String

camel.component.etcd-stats.use-global-ssl-context-parameters

Enable usage of global SSL context parameters.

false

Boolean

camel.component.etcd-stats.user-name

The user name to use for basic authentication.

String

camel.component.etcd-watch.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.etcd-watch.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.etcd-watch.configuration

Component configuration. The option is a org.apache.camel.component.etcd.EtcdConfiguration type.

EtcdConfiguration

camel.component.etcd-watch.enabled

Whether to enable auto configuration of the etcd-watch component. This is enabled by default.

Boolean

camel.component.etcd-watch.from-index

The index to watch from

0

Long

camel.component.etcd-watch.password

The password to use for basic authentication.

String

camel.component.etcd-watch.recursive

To apply an action recursively.

false

Boolean

camel.component.etcd-watch.send-empty-exchange-on-timeout

To send an empty message in case of timeout watching for a key.

false

Boolean

camel.component.etcd-watch.service-path

The path to look for for service discovery

/services/

String

camel.component.etcd-watch.ssl-context-parameters

To configure security using SSLContextParameters. The option is a org.apache.camel.support.jsse.SSLContextParameters type.

SSLContextParameters

camel.component.etcd-watch.timeout

To set the maximum time an action could take to complete. The option is a java.lang.Long type.

Long

camel.component.etcd-watch.uris

To set the URIs the client connects.

http://localhost:2379,http://localhost:4001

String

camel.component.etcd-watch.use-global-ssl-context-parameters

Enable usage of global SSL context parameters.

false

Boolean

camel.component.etcd-watch.user-name

The user name to use for basic authentication.

String