Netty HTTP

Since Camel 2.14

Both producer and consumer are supported

The Netty HTTP component is an extension to Netty component to facilitiate HTTP transport with Netty.

This camel component supports both producer and consumer endpoints.

Stream

Netty is stream based, which means the input it receives is submitted to Camel as a stream. That means you will only be able to read the content of the stream once. If you find a situation where the message body appears to be empty or you need to access the data multiple times (eg: doing multicasting, or redelivery error handling) you should use Stream caching or convert the message body to a String which is safe to be re-read multiple times. Notice Netty HTTP reads the entire stream into memory using io.netty.handler.codec.http.HttpObjectAggregator to build the entire full http message. But the resulting message is still a stream based message which is readable once.

Maven users will need to add the following dependency to their pom.xml for this component:

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-netty-http</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

URI format

The URI scheme for a netty component is as follows

netty-http:http://0.0.0.0:8080[?options]

You can append query options to the URI in the following format, ?option=value&option=value&…​

Query parameters vs endpoint options

You may be wondering how Camel recognizes URI query parameters and endpoint options. For example you might create endpoint URI as follows: netty-http:http//example.com?myParam=myValue&compression=true . In this example myParam is the HTTP parameter, while compression is the Camel endpoint option. The strategy used by Camel in such situations is to resolve available endpoint options and remove them from the URI. It means that for the discussed example, the HTTP request sent by Netty HTTP producer to the endpoint will look as follows: http//example.com?myParam=myValue, because compression endpoint option will be resolved and removed from the target URL. Keep also in mind that you cannot specify endpoint options using dynamic headers (like CamelHttpQuery). Endpoint options can be specified only at the endpoint URI definition level (like to or from DSL elements).

HTTP Options

A lot more options

This component inherits all the options from Netty, so make sure to look at the Netty documentation as well. Notice that some options from Netty is not applicable when using this Netty HTTP component, such as options related to UDP transport.

The Netty HTTP component supports 75 options, which are listed below.

Name Description Default Type

configuration (common)

To use the NettyConfiguration as configuration when creating endpoints.

NettyConfiguration

disconnect (common)

Whether or not to disconnect(close) from Netty Channel right after use. Can be used for both consumer and producer.

false

boolean

keepAlive (common)

Setting to ensure socket is not closed due to inactivity

true

boolean

reuseAddress (common)

Setting to facilitate socket multiplexing

true

boolean

reuseChannel (common)

This option allows producers and consumers (in client mode) to reuse the same Netty Channel for the lifecycle of processing the Exchange. This is useful if you need to call a server multiple times in a Camel route and want to use the same network connection. When using this, the channel is not returned to the connection pool until the Exchange is done; or disconnected if the disconnect option is set to true. The reused Channel is stored on the Exchange as an exchange property with the key NettyConstants#NETTY_CHANNEL which allows you to obtain the channel during routing and use it as well.

false

boolean

sync (common)

Setting to set endpoint as one-way or request-response

true

boolean

tcpNoDelay (common)

Setting to improve TCP protocol performance

true

boolean

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

broadcast (consumer)

Setting to choose Multicast over UDP

false

boolean

clientMode (consumer)

If the clientMode is true, netty consumer will connect the address as a TCP client.

false

boolean

reconnect (consumer)

Used only in clientMode in consumer, the consumer will attempt to reconnect on disconnection if this is enabled

true

boolean

reconnectInterval (consumer)

Used if reconnect and clientMode is enabled. The interval in milli seconds to attempt reconnection

10000

int

backlog (consumer)

Allows to configure a backlog for netty consumer (server). Note the backlog is just a best effort depending on the OS. Setting this option to a value such as 200, 500 or 1000, tells the TCP stack how long the accept queue can be If this option is not configured, then the backlog depends on OS setting.

int

bossCount (consumer)

When netty works on nio mode, it uses default bossCount parameter from Netty, which is 1. User can use this option to override the default bossCount from Netty

1

int

bossGroup (consumer)

Set the BossGroup which could be used for handling the new connection of the server side across the NettyEndpoint

EventLoopGroup

disconnectOnNoReply (consumer)

If sync is enabled then this option dictates NettyConsumer if it should disconnect where there is no reply to send back.

true

boolean

executorService (consumer)

To use the given EventExecutorGroup.

EventExecutorGroup

maximumPoolSize (consumer)

Sets a maximum thread pool size for the netty consumer ordered thread pool. The default size is 2 x cpu_core plus 1. Setting this value to eg 10 will then use 10 threads unless 2 x cpu_core plus 1 is a higher value, which then will override and be used. For example if there are 8 cores, then the consumer thread pool will be 17. This thread pool is used to route messages received from Netty by Camel. We use a separate thread pool to ensure ordering of messages and also in case some messages will block, then nettys worker threads (event loop) wont be affected.

int

nettyServerBootstrapFactory (consumer)

To use a custom NettyServerBootstrapFactory

NettyServerBootstrapFactory

networkInterface (consumer)

When using UDP then this option can be used to specify a network interface by its name, such as eth0 to join a multicast group.

String

noReplyLogLevel (consumer)

If sync is enabled this option dictates NettyConsumer which logging level to use when logging a there is no reply to send back. There are 6 enums and the value can be one of: TRACE, DEBUG, INFO, WARN, ERROR, OFF

WARN

LoggingLevel

serverClosedChannelException​CaughtLogLevel (consumer)

If the server (NettyConsumer) catches an java.nio.channels.ClosedChannelException then its logged using this logging level. This is used to avoid logging the closed channel exceptions, as clients can disconnect abruptly and then cause a flood of closed exceptions in the Netty server. There are 6 enums and the value can be one of: TRACE, DEBUG, INFO, WARN, ERROR, OFF

DEBUG

LoggingLevel

serverExceptionCaughtLogLevel (consumer)

If the server (NettyConsumer) catches an exception then its logged using this logging level. There are 6 enums and the value can be one of: TRACE, DEBUG, INFO, WARN, ERROR, OFF

WARN

LoggingLevel

serverInitializerFactory (consumer)

To use a custom ServerInitializerFactory

ServerInitializerFactory

usingExecutorService (consumer)

Whether to use ordered thread pool, to ensure events are processed orderly on the same channel.

true

boolean

connectTimeout (producer)

Time to wait for a socket connection to be available. Value is in milliseconds.

10000

int

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

requestTimeout (producer)

Allows to use a timeout for the Netty producer when calling a remote server. By default no timeout is in use. The value is in milli seconds, so eg 30000 is 30 seconds. The requestTimeout is using Netty’s ReadTimeoutHandler to trigger the timeout.

long

clientInitializerFactory (producer)

To use a custom ClientInitializerFactory

ClientInitializerFactory

correlationManager (producer)

To use a custom correlation manager to manage how request and reply messages are mapped when using request/reply with the netty producer. This should only be used if you have a way to map requests together with replies such as if there is correlation ids in both the request and reply messages. This can be used if you want to multiplex concurrent messages on the same channel (aka connection) in netty. When doing this you must have a way to correlate the request and reply messages so you can store the right reply on the inflight Camel Exchange before its continued routed. We recommend extending the TimeoutCorrelationManagerSupport when you build custom correlation managers. This provides support for timeout and other complexities you otherwise would need to implement as well. See also the producerPoolEnabled option for more details.

NettyCamelStateCorrelationManager

lazyChannelCreation (producer)

Channels can be lazily created to avoid exceptions, if the remote server is not up and running when the Camel producer is started.

true

boolean

producerPoolEnabled (producer)

Whether producer pool is enabled or not. Important: If you turn this off then a single shared connection is used for the producer, also if you are doing request/reply. That means there is a potential issue with interleaved responses if replies comes back out-of-order. Therefore you need to have a correlation id in both the request and reply messages so you can properly correlate the replies to the Camel callback that is responsible for continue processing the message in Camel. To do this you need to implement NettyCamelStateCorrelationManager as correlation manager and configure it via the correlationManager option. See also the correlationManager option for more details.

true

boolean

producerPoolMaxActive (producer)

Sets the cap on the number of objects that can be allocated by the pool (checked out to clients, or idle awaiting checkout) at a given time. Use a negative value for no limit.

-1

int

producerPoolMaxIdle (producer)

Sets the cap on the number of idle instances in the pool.

100

int

producerPoolMinEvictableIdle (producer)

Sets the minimum amount of time (value in millis) an object may sit idle in the pool before it is eligible for eviction by the idle object evictor.

300000

long

producerPoolMinIdle (producer)

Sets the minimum number of instances allowed in the producer pool before the evictor thread (if active) spawns new objects.

int

udpConnectionlessSending (producer)

This option supports connection less udp sending which is a real fire and forget. A connected udp send receive the PortUnreachableException if no one is listen on the receiving port.

false

boolean

useByteBuf (producer)

If the useByteBuf is true, netty producer will turn the message body into ByteBuf before sending it out.

false

boolean

allowSerializedHeaders (advanced)

Only used for TCP when transferExchange is true. When set to true, serializable objects in headers and properties will be added to the exchange. Otherwise Camel will exclude any non-serializable objects and log it at WARN level.

false

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

channelGroup (advanced)

To use a explicit ChannelGroup.

ChannelGroup

headerFilterStrategy (advanced)

To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter headers.

HeaderFilterStrategy

nativeTransport (advanced)

Whether to use native transport instead of NIO. Native transport takes advantage of the host operating system and is only supported on some platforms. You need to add the netty JAR for the host operating system you are using. See more details at: http://netty.io/wiki/native-transports.html

false

boolean

nettyHttpBinding (advanced)

To use a custom org.apache.camel.component.netty.http.NettyHttpBinding for binding to/from Netty and Camel Message API.

NettyHttpBinding

options (advanced)

Allows to configure additional netty options using option. as prefix. For example option.child.keepAlive=false to set the netty option child.keepAlive=false. See the Netty documentation for possible options that can be used.

Map

receiveBufferSize (advanced)

The TCP/UDP buffer sizes to be used during inbound communication. Size is bytes.

65536

int

receiveBufferSizePredictor (advanced)

Configures the buffer size predictor. See details at Jetty documentation and this mail thread.

int

sendBufferSize (advanced)

The TCP/UDP buffer sizes to be used during outbound communication. Size is bytes.

65536

int

transferExchange (advanced)

Only used for TCP. You can transfer the exchange over the wire instead of just the body. The following fields are transferred: In body, Out body, fault body, In headers, Out headers, fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level.

false

boolean

udpByteArrayCodec (advanced)

For UDP only. If enabled the using byte array codec instead of Java serialization protocol.

false

boolean

workerCount (advanced)

When netty works on nio mode, it uses default workerCount parameter from Netty (which is cpu_core_threads x 2). User can use this option to override the default workerCount from Netty.

int

workerGroup (advanced)

To use a explicit EventLoopGroup as the boss thread pool. For example to share a thread pool with multiple consumers or producers. By default each consumer or producer has their own worker pool with 2 x cpu count core threads.

EventLoopGroup

allowDefaultCodec (codec)

The netty component installs a default codec if both, encoder/decoder is null and textline is false. Setting allowDefaultCodec to false prevents the netty component from installing a default codec as the first element in the filter chain.

true

boolean

autoAppendDelimiter (codec)

Whether or not to auto append missing end delimiter when sending using the textline codec.

true

boolean

decoderMaxLineLength (codec)

The max line length to use for the textline codec.

1024

int

decoders (codec)

A list of decoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.

List

delimiter (codec)

The delimiter to use for the textline codec. Possible values are LINE and NULL. There are 2 enums and the value can be one of: LINE, NULL

LINE

TextLineDelimiter

encoders (codec)

A list of encoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.

List

encoding (codec)

The encoding (a charset name) to use for the textline codec. If not provided, Camel will use the JVM default Charset.

String

textline (codec)

Only used for TCP. If no codec is specified, you can use this flag to indicate a text line based codec; if not specified or the value is false, then Object Serialization is assumed over TCP - however only Strings are allowed to be serialized by default.

false

boolean

enabledProtocols (security)

Which protocols to enable when using SSL

TLSv1,TLSv1.1,TLSv1.2

String

keyStoreFile (security)

Client side certificate keystore to be used for encryption

File

keyStoreFormat (security)

Keystore format to be used for payload encryption. Defaults to JKS if not set

String

keyStoreResource (security)

Client side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.

String

needClientAuth (security)

Configures whether the server needs client authentication when using SSL.

false

boolean

passphrase (security)

Password setting to use in order to encrypt/decrypt payloads sent using SSH

String

securityConfiguration (security)

Refers to a org.apache.camel.component.netty.http.NettyHttpSecurityConfiguration for configuring secure web resources.

NettyHttpSecurityConfiguration

securityProvider (security)

Security provider to be used for payload encryption. Defaults to SunX509 if not set.

String

ssl (security)

Setting to specify whether SSL encryption is applied to this endpoint

false

boolean

sslClientCertHeaders (security)

When enabled and in SSL mode, then the Netty consumer will enrich the Camel Message with headers having information about the client certificate such as subject name, issuer name, serial number, and the valid date range.

false

boolean

sslContextParameters (security)

To configure security using SSLContextParameters

SSLContextParameters

sslHandler (security)

Reference to a class that could be used to return an SSL Handler

SslHandler

trustStoreFile (security)

Server side certificate keystore to be used for encryption

File

trustStoreResource (security)

Server side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.

String

useGlobalSslContextParameters (security)

Enable usage of global SSL context parameters.

false

boolean

The Netty HTTP endpoint is configured using URI syntax:

netty-http:protocol:host:port/path

with the following path and query parameters:

Path Parameters (4 parameters):

Name Description Default Type

protocol

Required The protocol to use which is either http, https or proxy - a consumer only option. There are 2 enums and the value can be one of: http, https

String

host

Required The local hostname such as localhost, or 0.0.0.0 when being a consumer. The remote HTTP server hostname when using producer.

String

port

The host port number

int

path

Resource path

String

Query Parameters (79 parameters):

Name Description Default Type

bridgeEndpoint (common)

If the option is true, the producer will ignore the Exchange.HTTP_URI header, and use the endpoint’s URI for request. You may also set the throwExceptionOnFailure to be false to let the producer send all the fault response back. The consumer working in the bridge mode will skip the gzip compression and WWW URL form encoding (by adding the Exchange.SKIP_GZIP_ENCODING and Exchange.SKIP_WWW_FORM_URLENCODED headers to the consumed exchange).

false

boolean

disconnect (common)

Whether or not to disconnect(close) from Netty Channel right after use. Can be used for both consumer and producer.

false

boolean

keepAlive (common)

Setting to ensure socket is not closed due to inactivity

true

boolean

reuseAddress (common)

Setting to facilitate socket multiplexing

true

boolean

reuseChannel (common)

This option allows producers and consumers (in client mode) to reuse the same Netty Channel for the lifecycle of processing the Exchange. This is useful if you need to call a server multiple times in a Camel route and want to use the same network connection. When using this, the channel is not returned to the connection pool until the Exchange is done; or disconnected if the disconnect option is set to true. The reused Channel is stored on the Exchange as an exchange property with the key NettyConstants#NETTY_CHANNEL which allows you to obtain the channel during routing and use it as well.

false

boolean

sync (common)

Setting to set endpoint as one-way or request-response

true

boolean

tcpNoDelay (common)

Setting to improve TCP protocol performance

true

boolean

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

matchOnUriPrefix (consumer)

Whether or not Camel should try to find a target consumer by matching the URI prefix if no exact match is found.

false

boolean

muteException (consumer)

If enabled and an Exchange failed processing on the consumer side the response’s body won’t contain the exception’s stack trace.

false

boolean

send503whenSuspended (consumer)

Whether to send back HTTP status code 503 when the consumer has been suspended. If the option is false then the Netty Acceptor is unbound when the consumer is suspended, so clients cannot connect anymore.

true

boolean

backlog (consumer)

Allows to configure a backlog for netty consumer (server). Note the backlog is just a best effort depending on the OS. Setting this option to a value such as 200, 500 or 1000, tells the TCP stack how long the accept queue can be If this option is not configured, then the backlog depends on OS setting.

int

bossCount (consumer)

When netty works on nio mode, it uses default bossCount parameter from Netty, which is 1. User can use this option to override the default bossCount from Netty

1

int

bossGroup (consumer)

Set the BossGroup which could be used for handling the new connection of the server side across the NettyEndpoint

EventLoopGroup

chunkedMaxContentLength (consumer)

Value in bytes the max content length per chunked frame received on the Netty HTTP server.

1048576

int

compression (consumer)

Allow using gzip/deflate for compression on the Netty HTTP server if the client supports it from the HTTP headers.

false

boolean

disconnectOnNoReply (consumer)

If sync is enabled then this option dictates NettyConsumer if it should disconnect where there is no reply to send back.

true

boolean

exceptionHandler (consumer)

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer)

Sets the exchange pattern when the consumer creates an exchange. There are 3 enums and the value can be one of: InOnly, InOut, InOptionalOut

ExchangePattern

httpMethodRestrict (consumer)

To disable HTTP methods on the Netty HTTP consumer. You can specify multiple separated by comma.

String

logWarnOnBadRequest (consumer)

Whether Netty HTTP server should log a WARN if decoding the HTTP request failed and a HTTP Status 400 (bad request) is returned.

true

boolean

mapHeaders (consumer)

If this option is enabled, then during binding from Netty to Camel Message then the headers will be mapped as well (eg added as header to the Camel Message as well). You can turn off this option to disable this. The headers can still be accessed from the org.apache.camel.component.netty.http.NettyHttpMessage message with the method getHttpRequest() that returns the Netty HTTP request io.netty.handler.codec.http.HttpRequest instance.

true

boolean

maxHeaderSize (consumer)

The maximum length of all headers. If the sum of the length of each header exceeds this value, a io.netty.handler.codec.TooLongFrameException will be raised.

8192

int

nettyServerBootstrapFactory (consumer)

To use a custom NettyServerBootstrapFactory

NettyServerBootstrapFactory

nettySharedHttpServer (consumer)

To use a shared Netty HTTP server. See Netty HTTP Server Example for more details.

NettySharedHttpServer

noReplyLogLevel (consumer)

If sync is enabled this option dictates NettyConsumer which logging level to use when logging a there is no reply to send back. There are 6 enums and the value can be one of: TRACE, DEBUG, INFO, WARN, ERROR, OFF

WARN

LoggingLevel

serverClosedChannelException​CaughtLogLevel (consumer)

If the server (NettyConsumer) catches an java.nio.channels.ClosedChannelException then its logged using this logging level. This is used to avoid logging the closed channel exceptions, as clients can disconnect abruptly and then cause a flood of closed exceptions in the Netty server. There are 6 enums and the value can be one of: TRACE, DEBUG, INFO, WARN, ERROR, OFF

DEBUG

LoggingLevel

serverExceptionCaughtLogLevel (consumer)

If the server (NettyConsumer) catches an exception then its logged using this logging level. There are 6 enums and the value can be one of: TRACE, DEBUG, INFO, WARN, ERROR, OFF

WARN

LoggingLevel

serverInitializerFactory (consumer)

To use a custom ServerInitializerFactory

ServerInitializerFactory

traceEnabled (consumer)

Specifies whether to enable HTTP TRACE for this Netty HTTP consumer. By default TRACE is turned off.

false

boolean

urlDecodeHeaders (consumer)

If this option is enabled, then during binding from Netty to Camel Message then the header values will be URL decoded (eg %20 will be a space character. Notice this option is used by the default org.apache.camel.component.netty.http.NettyHttpBinding and therefore if you implement a custom org.apache.camel.component.netty.http.NettyHttpBinding then you would need to decode the headers accordingly to this option.

false

boolean

usingExecutorService (consumer)

Whether to use ordered thread pool, to ensure events are processed orderly on the same channel.

true

boolean

connectTimeout (producer)

Time to wait for a socket connection to be available. Value is in milliseconds.

10000

int

cookieHandler (producer)

Configure a cookie handler to maintain a HTTP session

CookieHandler

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

requestTimeout (producer)

Allows to use a timeout for the Netty producer when calling a remote server. By default no timeout is in use. The value is in milli seconds, so eg 30000 is 30 seconds. The requestTimeout is using Netty’s ReadTimeoutHandler to trigger the timeout.

long

throwExceptionOnFailure (producer)

Option to disable throwing the HttpOperationFailedException in case of failed responses from the remote server. This allows you to get all responses regardless of the HTTP status code.

true

boolean

clientInitializerFactory (producer)

To use a custom ClientInitializerFactory

ClientInitializerFactory

lazyChannelCreation (producer)

Channels can be lazily created to avoid exceptions, if the remote server is not up and running when the Camel producer is started.

true

boolean

okStatusCodeRange (producer)

The status codes which are considered a success response. The values are inclusive. Multiple ranges can be defined, separated by comma, e.g. 200-204,209,301-304. Each range must be a single number or from-to with the dash included. The default range is 200-299

200-299

String

producerPoolEnabled (producer)

Whether producer pool is enabled or not. Important: If you turn this off then a single shared connection is used for the producer, also if you are doing request/reply. That means there is a potential issue with interleaved responses if replies comes back out-of-order. Therefore you need to have a correlation id in both the request and reply messages so you can properly correlate the replies to the Camel callback that is responsible for continue processing the message in Camel. To do this you need to implement NettyCamelStateCorrelationManager as correlation manager and configure it via the correlationManager option. See also the correlationManager option for more details.

true

boolean

producerPoolMaxActive (producer)

Sets the cap on the number of objects that can be allocated by the pool (checked out to clients, or idle awaiting checkout) at a given time. Use a negative value for no limit.

-1

int

producerPoolMaxIdle (producer)

Sets the cap on the number of idle instances in the pool.

100

int

producerPoolMinEvictableIdle (producer)

Sets the minimum amount of time (value in millis) an object may sit idle in the pool before it is eligible for eviction by the idle object evictor.

300000

long

producerPoolMinIdle (producer)

Sets the minimum number of instances allowed in the producer pool before the evictor thread (if active) spawns new objects.

int

useRelativePath (producer)

Sets whether to use a relative path in HTTP requests.

true

boolean

allowSerializedHeaders (advanced)

Only used for TCP when transferExchange is true. When set to true, serializable objects in headers and properties will be added to the exchange. Otherwise Camel will exclude any non-serializable objects and log it at WARN level.

false

boolean

channelGroup (advanced)

To use a explicit ChannelGroup.

ChannelGroup

configuration (advanced)

To use a custom configured NettyHttpConfiguration for configuring this endpoint.

NettyHttpConfiguration

disableStreamCache (advanced)

Determines whether or not the raw input stream from Netty HttpRequest#getContent() or HttpResponset#getContent() is cached or not (Camel will read the stream into a in light-weight memory based Stream caching) cache. By default Camel will cache the Netty input stream to support reading it multiple times to ensure it Camel can retrieve all data from the stream. However you can set this option to true when you for example need to access the raw stream, such as streaming it directly to a file or other persistent store. Mind that if you enable this option, then you cannot read the Netty stream multiple times out of the box, and you would need manually to reset the reader index on the Netty raw stream. Also Netty will auto-close the Netty stream when the Netty HTTP server/HTTP client is done processing, which means that if the asynchronous routing engine is in use then any asynchronous thread that may continue routing the org.apache.camel.Exchange may not be able to read the Netty stream, because Netty has closed it.

false

boolean

headerFilterStrategy (advanced)

To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter headers.

HeaderFilterStrategy

nativeTransport (advanced)

Whether to use native transport instead of NIO. Native transport takes advantage of the host operating system and is only supported on some platforms. You need to add the netty JAR for the host operating system you are using. See more details at: http://netty.io/wiki/native-transports.html

false

boolean

nettyHttpBinding (advanced)

To use a custom org.apache.camel.component.netty.http.NettyHttpBinding for binding to/from Netty and Camel Message API.

NettyHttpBinding

options (advanced)

Allows to configure additional netty options using option. as prefix. For example option.child.keepAlive=false to set the netty option child.keepAlive=false. See the Netty documentation for possible options that can be used.

Map

receiveBufferSize (advanced)

The TCP/UDP buffer sizes to be used during inbound communication. Size is bytes.

65536

int

receiveBufferSizePredictor (advanced)

Configures the buffer size predictor. See details at Jetty documentation and this mail thread.

int

sendBufferSize (advanced)

The TCP/UDP buffer sizes to be used during outbound communication. Size is bytes.

65536

int

synchronous (advanced)

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

boolean

transferException (advanced)

If enabled and an Exchange failed processing on the consumer side, and if the caused Exception was send back serialized in the response as a application/x-java-serialized-object content type. On the producer side the exception will be deserialized and thrown as is, instead of the HttpOperationFailedException. The caused exception is required to be serialized. This is by default turned off. If you enable this then be aware that Java will deserialize the incoming data from the request to Java and that can be a potential security risk.

false

boolean

transferExchange (advanced)

Only used for TCP. You can transfer the exchange over the wire instead of just the body. The following fields are transferred: In body, Out body, fault body, In headers, Out headers, fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level.

false

boolean

workerCount (advanced)

When netty works on nio mode, it uses default workerCount parameter from Netty (which is cpu_core_threads x 2). User can use this option to override the default workerCount from Netty.

int

workerGroup (advanced)

To use a explicit EventLoopGroup as the boss thread pool. For example to share a thread pool with multiple consumers or producers. By default each consumer or producer has their own worker pool with 2 x cpu count core threads.

EventLoopGroup

decoders (codec)

A list of decoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.

List

encoders (codec)

A list of encoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.

List

enabledProtocols (security)

Which protocols to enable when using SSL

TLSv1,TLSv1.1,TLSv1.2

String

keyStoreFile (security)

Client side certificate keystore to be used for encryption

File

keyStoreFormat (security)

Keystore format to be used for payload encryption. Defaults to JKS if not set

String

keyStoreResource (security)

Client side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.

String

needClientAuth (security)

Configures whether the server needs client authentication when using SSL.

false

boolean

passphrase (security)

Password setting to use in order to encrypt/decrypt payloads sent using SSH

String

securityConfiguration (security)

Refers to a org.apache.camel.component.netty.http.NettyHttpSecurityConfiguration for configuring secure web resources.

NettyHttpSecurityConfiguration

securityOptions (security)

To configure NettyHttpSecurityConfiguration using key/value pairs from the map

Map

securityProvider (security)

Security provider to be used for payload encryption. Defaults to SunX509 if not set.

String

ssl (security)

Setting to specify whether SSL encryption is applied to this endpoint

false

boolean

sslClientCertHeaders (security)

When enabled and in SSL mode, then the Netty consumer will enrich the Camel Message with headers having information about the client certificate such as subject name, issuer name, serial number, and the valid date range.

false

boolean

sslContextParameters (security)

To configure security using SSLContextParameters

SSLContextParameters

sslHandler (security)

Reference to a class that could be used to return an SSL Handler

SslHandler

trustStoreFile (security)

Server side certificate keystore to be used for encryption

File

trustStoreResource (security)

Server side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.

String

Message Headers

The following headers can be used on the producer to control the HTTP request.

Name Type Description

CamelHttpMethod

String

Allow to control what HTTP method to use such as GET, POST, TRACE etc. The type can also be a io.netty.handler.codec.http.HttpMethod instance.

CamelHttpQuery

String

Allows to provide URI query parameters as a String value that overrides the endpoint configuration. Separate multiple parameters using the & sign. For example: foo=bar&beer=yes.

CamelHttpPath

String

Allows to provide URI context-path and query parameters as a String value that overrides the endpoint configuration. This allows to reuse the same producer for calling same remote http server, but using a dynamic context-path and query parameters.

Content-Type

String

To set the content-type of the HTTP body. For example: text/plain; charset="UTF-8".

CamelHttpResponseCode

int

Allows to set the HTTP Status code to use. By default 200 is used for success, and 500 for failure.

The following headers is provided as meta-data when a route starts from an Netty HTTP endpoint:

The description in the table takes offset in a route having: from("netty-http:http:0.0.0.0:8080/myapp")…​

Name Type Description

CamelHttpMethod

String

The HTTP method used, such as GET, POST, TRACE etc.

CamelHttpUrl

String

The URL including protocol, host and port, etc: http://0.0.0.0:8080/myapp

CamelHttpUri

String

The URI without protocol, host and port, etc: /myapp

CamelHttpQuery

String

Any query parameters, such as foo=bar&beer=yes

CamelHttpRawQuery

String

Any query parameters, such as foo=bar&beer=yes. Stored in the raw form, as they arrived to the consumer (i.e. before URL decoding).

CamelHttpPath

String

Additional context-path. This value is empty if the client called the context-path /myapp. If the client calls /myapp/mystuff, then this header value is /mystuff. In other words its the value after the context-path configured on the route endpoint.

CamelHttpCharacterEncoding

String

The charset from the content-type header.

CamelHttpAuthentication

String

If the user was authenticated using HTTP Basic then this header is added with the value Basic.

Content-Type

String

The content type if provided. For example: text/plain; charset="UTF-8".

Access to Netty types

This component uses the org.apache.camel.component.netty.http.NettyHttpMessage as the message implementation on the Exchange. This allows end users to get access to the original Netty request/response instances if needed, as shown below. Mind that the original response may not be accessible at all times.

io.netty.handler.codec.http.HttpRequest request = exchange.getIn(NettyHttpMessage.class).getHttpRequest();

Examples

In the route below we use Netty HTTP as a HTTP server, which returns back a hardcoded "Bye World" message.

    from("netty-http:http://0.0.0.0:8080/foo")
      .transform().constant("Bye World");

And we can call this HTTP server using Camel also, with the ProducerTemplate as shown below:

    String out = template.requestBody("netty-http:http://0.0.0.0:8080/foo", "Hello World", String.class);
    System.out.println(out);

And we get back "Bye World" as the output.

How do I let Netty match wildcards

By default Netty HTTP will only match on exact uri’s. But you can instruct Netty to match prefixes. For example

from("netty-http:http://0.0.0.0:8123/foo").to("mock:foo");

In the route above Netty HTTP will only match if the uri is an exact match, so it will match if you enter
http://0.0.0.0:8123/foo but not match if you do http://0.0.0.0:8123/foo/bar.

So if you want to enable wildcard matching you do as follows:

from("netty-http:http://0.0.0.0:8123/foo?matchOnUriPrefix=true").to("mock:foo");

So now Netty matches any endpoints with starts with foo.

To match any endpoint you can do:

from("netty-http:http://0.0.0.0:8123?matchOnUriPrefix=true").to("mock:foo");

Using multiple routes with same port

In the same CamelContext you can have multiple routes from Netty HTTP that shares the same port (eg a io.netty.bootstrap.ServerBootstrap instance). Doing this requires a number of bootstrap options to be identical in the routes, as the routes will share the same io.netty.bootstrap.ServerBootstrap instance. The instance will be configured with the options from the first route created.

The options the routes must be identical configured is all the options defined in the org.apache.camel.component.netty.NettyServerBootstrapConfiguration configuration class. If you have configured another route with different options, Camel will throw an exception on startup, indicating the options is not identical. To mitigate this ensure all options is identical.

Here is an example with two routes that share the same port.

Two routes sharing the same port

from("netty-http:http://0.0.0.0:{{port}}/foo")
  .to("mock:foo")
  .transform().constant("Bye World");

from("netty-http:http://0.0.0.0:{{port}}/bar")
  .to("mock:bar")
  .transform().constant("Bye Camel");

And here is an example of a mis configured 2nd route that do not have identical org.apache.camel.component.netty.NettyServerBootstrapConfiguration option as the 1st route. This will cause Camel to fail on startup.

Two routes sharing the same port, but the 2nd route is misconfigured and will fail on starting

from("netty-http:http://0.0.0.0:{{port}}/foo")
  .to("mock:foo")
  .transform().constant("Bye World");

// we cannot have a 2nd route on same port with SSL enabled, when the 1st route is NOT
from("netty-http:http://0.0.0.0:{{port}}/bar?ssl=true")
  .to("mock:bar")
  .transform().constant("Bye Camel");

Reusing same server bootstrap configuration with multiple routes

By configuring the common server bootstrap option in an single instance of a org.apache.camel.component.netty.NettyServerBootstrapConfiguration type, we can use the bootstrapConfiguration option on the Netty HTTP consumers to refer and reuse the same options across all consumers.

<bean id="nettyHttpBootstrapOptions" class="org.apache.camel.component.netty.NettyServerBootstrapConfiguration">
  <property name="backlog" value="200"/>
  <property name="connectionTimeout" value="20000"/>
  <property name="workerCount" value="16"/>
</bean>

And in the routes you refer to this option as shown below

<route>
  <from uri="netty-http:http://0.0.0.0:{{port}}/foo?bootstrapConfiguration=#nettyHttpBootstrapOptions"/>
  ...
</route>

<route>
  <from uri="netty-http:http://0.0.0.0:{{port}}/bar?bootstrapConfiguration=#nettyHttpBootstrapOptions"/>
  ...
</route>

<route>
  <from uri="netty-http:http://0.0.0.0:{{port}}/beer?bootstrapConfiguration=#nettyHttpBootstrapOptions"/>
  ...
</route>

Reusing same server bootstrap configuration with multiple routes across multiple bundles in OSGi container

See the Netty HTTP Server Example for more details and example how to do that.

Implementing a reverse proxy

Netty HTTP component can act as a reverse proxy, in that case Exchange.HTTP_SCHEME, Exchange.HTTP_HOST and Exchange.HTTP_PORT headers are populated from the absolute URL received on the request line of the HTTP request.

Here’s an example of a HTTP proxy that simply transforms the response from the origin server to uppercase.

from("netty-http:proxy://0.0.0.0:8080")
    .toD("netty-http:"
        + "${headers." + Exchange.HTTP_SCHEME + "}://"
        + "${headers." + Exchange.HTTP_HOST + "}:"
        + "${headers." + Exchange.HTTP_PORT + "}")
    .process(this::processResponse);

void processResponse(final Exchange exchange) {
    final NettyHttpMessage message = exchange.getIn(NettyHttpMessage.class);
    final FullHttpResponse response = message.getHttpResponse();

    final ByteBuf buf = response.content();
    final String string = buf.toString(StandardCharsets.UTF_8);

    buf.resetWriterIndex();
    ByteBufUtil.writeUtf8(buf, string.toUpperCase(Locale.US));
}

Using HTTP Basic Authentication

The Netty HTTP consumer supports HTTP basic authentication by specifying the security realm name to use, as shown below

<route>
   <from uri="netty-http:http://0.0.0.0:{{port}}/foo?securityConfiguration.realm=karaf"/>
   ...
</route>

The realm name is mandatory to enable basic authentication. By default the JAAS based authenticator is used, which will use the realm name specified (karaf in the example above) and use the JAAS realm and the JAAS \{{LoginModule}}s of this realm for authentication.

End user of Apache Karaf / ServiceMix has a karaf realm out of the box, and hence why the example above would work out of the box in these containers.

Specifying ACL on web resources

The org.apache.camel.component.netty.http.SecurityConstraint allows to define constrains on web resources. And the org.apache.camel.component.netty.http.SecurityConstraintMapping is provided out of the box, allowing to easily define inclusions and exclusions with roles.

For example as shown below in the XML DSL, we define the constraint bean:

  <bean id="constraint" class="org.apache.camel.component.netty.http.SecurityConstraintMapping">
    <!-- inclusions defines url -> roles restrictions -->
    <!-- a * should be used for any role accepted (or even no roles) -->
    <property name="inclusions">
      <map>
        <entry key="/*" value="*"/>
        <entry key="/admin/*" value="admin"/>
        <entry key="/guest/*" value="admin,guest"/>
      </map>
    </property>
    <!-- exclusions is used to define public urls, which requires no authentication -->
    <property name="exclusions">
      <set>
        <value>/public/*</value>
      </set>
    </property>
  </bean>

The constraint above is define so that

  • access to /* is restricted and any roles is accepted (also if user has no roles)

  • access to /admin/* requires the admin role

  • access to /guest/* requires the admin or guest role

  • access to /public/* is an exclusion which means no authentication is needed, and is therefore public for everyone without logging in

To use this constraint we just need to refer to the bean id as shown below:

<route>
   <from uri="netty-http:http://0.0.0.0:{{port}}/foo?matchOnUriPrefix=true&amp;securityConfiguration.realm=karaf&amp;securityConfiguration.securityConstraint=#constraint"/>
   ...
</route>

Spring Boot Auto-Configuration

When using netty-http with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-netty-http-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 62 options, which are listed below.

Name Description Default Type

camel.component.netty-http.allow-serialized-headers

Only used for TCP when transferExchange is true. When set to true, serializable objects in headers and properties will be added to the exchange. Otherwise Camel will exclude any non-serializable objects and log it at WARN level.

false

Boolean

camel.component.netty-http.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.netty-http.backlog

Allows to configure a backlog for netty consumer (server). Note the backlog is just a best effort depending on the OS. Setting this option to a value such as 200, 500 or 1000, tells the TCP stack how long the accept queue can be If this option is not configured, then the backlog depends on OS setting.

Integer

camel.component.netty-http.boss-count

When netty works on nio mode, it uses default bossCount parameter from Netty, which is 1. User can use this option to override the default bossCount from Netty

1

Integer

camel.component.netty-http.boss-group

Set the BossGroup which could be used for handling the new connection of the server side across the NettyEndpoint. The option is a io.netty.channel.EventLoopGroup type.

EventLoopGroup

camel.component.netty-http.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.netty-http.channel-group

To use a explicit ChannelGroup. The option is a io.netty.channel.group.ChannelGroup type.

ChannelGroup

camel.component.netty-http.client-initializer-factory

To use a custom ClientInitializerFactory. The option is a org.apache.camel.component.netty.ClientInitializerFactory type.

ClientInitializerFactory

camel.component.netty-http.configuration

To use the NettyConfiguration as configuration when creating endpoints. The option is a org.apache.camel.component.netty.NettyConfiguration type.

NettyConfiguration

camel.component.netty-http.connect-timeout

Time to wait for a socket connection to be available. Value is in milliseconds.

10000

Integer

camel.component.netty-http.correlation-manager

To use a custom correlation manager to manage how request and reply messages are mapped when using request/reply with the netty producer. This should only be used if you have a way to map requests together with replies such as if there is correlation ids in both the request and reply messages. This can be used if you want to multiplex concurrent messages on the same channel (aka connection) in netty. When doing this you must have a way to correlate the request and reply messages so you can store the right reply on the inflight Camel Exchange before its continued routed. We recommend extending the TimeoutCorrelationManagerSupport when you build custom correlation managers. This provides support for timeout and other complexities you otherwise would need to implement as well. See also the producerPoolEnabled option for more details. The option is a org.apache.camel.component.netty.NettyCamelStateCorrelationManager type.

NettyCamelStateCorrelationManager

camel.component.netty-http.decoders

A list of decoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.

List

camel.component.netty-http.disconnect

Whether or not to disconnect(close) from Netty Channel right after use. Can be used for both consumer and producer.

false

Boolean

camel.component.netty-http.disconnect-on-no-reply

If sync is enabled then this option dictates NettyConsumer if it should disconnect where there is no reply to send back.

true

Boolean

camel.component.netty-http.enabled

Whether to enable auto configuration of the netty-http component. This is enabled by default.

Boolean

camel.component.netty-http.enabled-protocols

Which protocols to enable when using SSL

TLSv1,TLSv1.1,TLSv1.2

String

camel.component.netty-http.encoders

A list of encoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.

List

camel.component.netty-http.executor-service

To use the given EventExecutorGroup. The option is a io.netty.util.concurrent.EventExecutorGroup type.

EventExecutorGroup

camel.component.netty-http.header-filter-strategy

To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter headers. The option is a org.apache.camel.spi.HeaderFilterStrategy type.

HeaderFilterStrategy

camel.component.netty-http.keep-alive

Setting to ensure socket is not closed due to inactivity

true

Boolean

camel.component.netty-http.key-store-file

Client side certificate keystore to be used for encryption

File

camel.component.netty-http.key-store-format

Keystore format to be used for payload encryption. Defaults to JKS if not set

String

camel.component.netty-http.key-store-resource

Client side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.

String

camel.component.netty-http.lazy-channel-creation

Channels can be lazily created to avoid exceptions, if the remote server is not up and running when the Camel producer is started.

true

Boolean

camel.component.netty-http.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.netty-http.maximum-pool-size

Sets a maximum thread pool size for the netty consumer ordered thread pool. The default size is 2 x cpu_core plus 1. Setting this value to eg 10 will then use 10 threads unless 2 x cpu_core plus 1 is a higher value, which then will override and be used. For example if there are 8 cores, then the consumer thread pool will be 17. This thread pool is used to route messages received from Netty by Camel. We use a separate thread pool to ensure ordering of messages and also in case some messages will block, then nettys worker threads (event loop) wont be affected.

Integer

camel.component.netty-http.native-transport

Whether to use native transport instead of NIO. Native transport takes advantage of the host operating system and is only supported on some platforms. You need to add the netty JAR for the host operating system you are using. See more details at: http://netty.io/wiki/native-transports.html

false

Boolean

camel.component.netty-http.need-client-auth

Configures whether the server needs client authentication when using SSL.

false

Boolean

camel.component.netty-http.netty-http-binding

To use a custom org.apache.camel.component.netty.http.NettyHttpBinding for binding to/from Netty and Camel Message API. The option is a org.apache.camel.component.netty.http.NettyHttpBinding type.

NettyHttpBinding

camel.component.netty-http.netty-server-bootstrap-factory

To use a custom NettyServerBootstrapFactory. The option is a org.apache.camel.component.netty.NettyServerBootstrapFactory type.

NettyServerBootstrapFactory

camel.component.netty-http.no-reply-log-level

If sync is enabled this option dictates NettyConsumer which logging level to use when logging a there is no reply to send back.

LoggingLevel

camel.component.netty-http.options

Allows to configure additional netty options using option. as prefix. For example option.child.keepAlive=false to set the netty option child.keepAlive=false. See the Netty documentation for possible options that can be used.

Map

camel.component.netty-http.passphrase

Password setting to use in order to encrypt/decrypt payloads sent using SSH

String

camel.component.netty-http.producer-pool-enabled

Whether producer pool is enabled or not. Important: If you turn this off then a single shared connection is used for the producer, also if you are doing request/reply. That means there is a potential issue with interleaved responses if replies comes back out-of-order. Therefore you need to have a correlation id in both the request and reply messages so you can properly correlate the replies to the Camel callback that is responsible for continue processing the message in Camel. To do this you need to implement NettyCamelStateCorrelationManager as correlation manager and configure it via the correlationManager option. See also the correlationManager option for more details.

true

Boolean

camel.component.netty-http.producer-pool-max-active

Sets the cap on the number of objects that can be allocated by the pool (checked out to clients, or idle awaiting checkout) at a given time. Use a negative value for no limit.

-1

Integer

camel.component.netty-http.producer-pool-max-idle

Sets the cap on the number of idle instances in the pool.

100

Integer

camel.component.netty-http.producer-pool-min-evictable-idle

Sets the minimum amount of time (value in millis) an object may sit idle in the pool before it is eligible for eviction by the idle object evictor.

300000

Long

camel.component.netty-http.producer-pool-min-idle

Sets the minimum number of instances allowed in the producer pool before the evictor thread (if active) spawns new objects.

Integer

camel.component.netty-http.receive-buffer-size

The TCP/UDP buffer sizes to be used during inbound communication. Size is bytes.

65536

Integer

camel.component.netty-http.receive-buffer-size-predictor

Configures the buffer size predictor. See details at Jetty documentation and this mail thread.

Integer

camel.component.netty-http.request-timeout

Allows to use a timeout for the Netty producer when calling a remote server. By default no timeout is in use. The value is in milli seconds, so eg 30000 is 30 seconds. The requestTimeout is using Netty’s ReadTimeoutHandler to trigger the timeout.

Long

camel.component.netty-http.reuse-address

Setting to facilitate socket multiplexing

true

Boolean

camel.component.netty-http.reuse-channel

This option allows producers and consumers (in client mode) to reuse the same Netty Channel for the lifecycle of processing the Exchange. This is useful if you need to call a server multiple times in a Camel route and want to use the same network connection. When using this, the channel is not returned to the connection pool until the Exchange is done; or disconnected if the disconnect option is set to true. The reused Channel is stored on the Exchange as an exchange property with the key NettyConstants#NETTY_CHANNEL which allows you to obtain the channel during routing and use it as well.

false

Boolean

camel.component.netty-http.security-configuration

Refers to a org.apache.camel.component.netty.http.NettyHttpSecurityConfiguration for configuring secure web resources. The option is a org.apache.camel.component.netty.http.NettyHttpSecurityConfiguration type.

NettyHttpSecurityConfiguration

camel.component.netty-http.security-provider

Security provider to be used for payload encryption. Defaults to SunX509 if not set.

String

camel.component.netty-http.send-buffer-size

The TCP/UDP buffer sizes to be used during outbound communication. Size is bytes.

65536

Integer

camel.component.netty-http.server-closed-channel-exception-caught-log-level

If the server (NettyConsumer) catches an java.nio.channels.ClosedChannelException then its logged using this logging level. This is used to avoid logging the closed channel exceptions, as clients can disconnect abruptly and then cause a flood of closed exceptions in the Netty server.

LoggingLevel

camel.component.netty-http.server-exception-caught-log-level

If the server (NettyConsumer) catches an exception then its logged using this logging level.

LoggingLevel

camel.component.netty-http.server-initializer-factory

To use a custom ServerInitializerFactory. The option is a org.apache.camel.component.netty.ServerInitializerFactory type.

ServerInitializerFactory

camel.component.netty-http.ssl

Setting to specify whether SSL encryption is applied to this endpoint

false

Boolean

camel.component.netty-http.ssl-client-cert-headers

When enabled and in SSL mode, then the Netty consumer will enrich the Camel Message with headers having information about the client certificate such as subject name, issuer name, serial number, and the valid date range.

false

Boolean

camel.component.netty-http.ssl-context-parameters

To configure security using SSLContextParameters. The option is a org.apache.camel.support.jsse.SSLContextParameters type.

SSLContextParameters

camel.component.netty-http.ssl-handler

Reference to a class that could be used to return an SSL Handler. The option is a io.netty.handler.ssl.SslHandler type.

SslHandler

camel.component.netty-http.sync

Setting to set endpoint as one-way or request-response

true

Boolean

camel.component.netty-http.tcp-no-delay

Setting to improve TCP protocol performance

true

Boolean

camel.component.netty-http.transfer-exchange

Only used for TCP. You can transfer the exchange over the wire instead of just the body. The following fields are transferred: In body, Out body, fault body, In headers, Out headers, fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level.

false

Boolean

camel.component.netty-http.trust-store-file

Server side certificate keystore to be used for encryption

File

camel.component.netty-http.trust-store-resource

Server side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.

String

camel.component.netty-http.use-global-ssl-context-parameters

Enable usage of global SSL context parameters.

false

Boolean

camel.component.netty-http.using-executor-service

Whether to use ordered thread pool, to ensure events are processed orderly on the same channel.

true

Boolean

camel.component.netty-http.worker-count

When netty works on nio mode, it uses default workerCount parameter from Netty (which is cpu_core_threads x 2). User can use this option to override the default workerCount from Netty.

Integer

camel.component.netty-http.worker-group

To use a explicit EventLoopGroup as the boss thread pool. For example to share a thread pool with multiple consumers or producers. By default each consumer or producer has their own worker pool with 2 x cpu count core threads. The option is a io.netty.channel.EventLoopGroup type.

EventLoopGroup
Back to top