Azure Storage Blob Service (Deprecated)

Since Camel 2.19

Both producer and consumer are supported

The Azure Blob component supports storing and retrieving the blobs to/from Azure Storage Blob service.

Note: This component uses the legacy Azure SDK v8 and thus is Deprecated. There is another component Azure Storage Blob Component that uses the latest 12+ Azure SDK version.

Prerequisites

You must have a valid Windows Azure Storage account. More information is available at Azure Documentation Portal.

URI Format

azure-blob://accountName/containerName[/blobName][?options]

In most cases a blobName is required and the blob will be created if it does not already exist.
You can append query options to the URI in the following format, ?options=value&option2=value&…​

For example in order to download a blob content from the public block blob blockBlob located on the container1 in the camelazure storage account, use the following snippet:

from("azure-blob:/camelazure/container1/blockBlob").
to("file://blobdirectory");

URI Options

The Azure Storage Blob Service (Deprecated) component supports 22 options, which are listed below.

Name Description Default Type

azureBlobClient (common)

The blob service client

CloudBlob

blobOffset (common)

Set the blob offset for the upload or download operations, default is 0

0

Long

blobType (common)

Set a blob type, 'blockblob' is default. There are 3 enums and the value can be one of: blockblob, appendblob, pageblob

blockblob

BlobType

closeStreamAfterRead (common)

Close the stream after read or keep it open, default is true

true

boolean

credentials (common)

Set the storage credentials, required in most cases

StorageCredentials

dataLength (common)

Set the data length for the download or page blob upload operations

Long

fileDir (common)

Set the file directory where the downloaded blobs will be saved to

String

publicForRead (common)

Storage resources can be public for reading their content, if this property is enabled then the credentials do not have to be set

false

boolean

streamReadSize (common)

Set the minimum read size in bytes when reading the blob content

int

validateClientURI (common)

Whether to validate the Azure client URI

true

boolean

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

blobMetadata (producer)

Set the blob meta-data

Map

blobPrefix (producer)

Set a prefix which can be used for listing the blobs

String

closeStreamAfterWrite (producer)

Close the stream after write or keep it open, default is true

true

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

operation (producer)

Blob service operation hint to the producer. There are 14 enums and the value can be one of: getBlob, deleteBlob, listBlobs, updateBlockBlob, uploadBlobBlocks, commitBlobBlockList, getBlobBlockList, createAppendBlob, updateAppendBlob, createPageBlob, updatePageBlob, resizePageBlob, clearPageBlob, getPageBlobRanges

listBlobs

BlobServiceOperations

streamWriteSize (producer)

Set the size of the buffer for writing block and page blocks

int

useFlatListing (producer)

Specify if the flat or hierarchical blob listing should be used

true

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

configuration (advanced)

The Blob Service configuration

BlobServiceConfiguration

credentialsAccountKey (security)

Set the storage account key used during authentication phase

String

credentialsAccountName (security)

Set the storage account name used during authentication phase

String

The Azure Storage Blob Service (Deprecated) endpoint is configured using URI syntax:

azure-blob:containerOrBlobUri

with the following path and query parameters:

Path Parameters (1 parameters):

Name Description Default Type

containerOrBlobUri

Required Container or Blob compact Uri

String

Query Parameters (23 parameters):

Name Description Default Type

azureBlobClient (common)

The blob service client

CloudBlob

blobOffset (common)

Set the blob offset for the upload or download operations, default is 0

0

Long

blobType (common)

Set a blob type, 'blockblob' is default. There are 3 enums and the value can be one of: blockblob, appendblob, pageblob

blockblob

BlobType

closeStreamAfterRead (common)

Close the stream after read or keep it open, default is true

true

boolean

credentials (common)

Set the storage credentials, required in most cases

StorageCredentials

dataLength (common)

Set the data length for the download or page blob upload operations

Long

fileDir (common)

Set the file directory where the downloaded blobs will be saved to

String

publicForRead (common)

Storage resources can be public for reading their content, if this property is enabled then the credentials do not have to be set

false

boolean

streamReadSize (common)

Set the minimum read size in bytes when reading the blob content

int

validateClientURI (common)

Whether to validate the Azure client URI

true

boolean

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

exceptionHandler (consumer)

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer)

Sets the exchange pattern when the consumer creates an exchange. There are 3 enums and the value can be one of: InOnly, InOut, InOptionalOut

ExchangePattern

blobMetadata (producer)

Set the blob meta-data

Map

blobPrefix (producer)

Set a prefix which can be used for listing the blobs

String

closeStreamAfterWrite (producer)

Close the stream after write or keep it open, default is true

true

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

operation (producer)

Blob service operation hint to the producer. There are 14 enums and the value can be one of: getBlob, deleteBlob, listBlobs, updateBlockBlob, uploadBlobBlocks, commitBlobBlockList, getBlobBlockList, createAppendBlob, updateAppendBlob, createPageBlob, updatePageBlob, resizePageBlob, clearPageBlob, getPageBlobRanges

listBlobs

BlobServiceOperations

streamWriteSize (producer)

Set the size of the buffer for writing block and page blocks

int

useFlatListing (producer)

Specify if the flat or hierarchical blob listing should be used

true

boolean

synchronous (advanced)

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

boolean

credentialsAccountKey (security)

Set the storage account key used during authentication phase

String

credentialsAccountName (security)

Set the storage account name used during authentication phase

String

Required Azure Storage Blob Service component options

You have to provide the containerOrBlob name and the credentials if the private blob needs to be accessed.

Usage

Message headers set by the Azure Storage Blob Service producer

Header Type Description

CamelFileName

String

The file name for the downloaded blob content.

Message headers set by the Azure Storage Blob Service producer consumer

Header Type Description

CamelFileName

String

The file name for the downloaded blob content.

Azure Blob Service operations

Operations common to all block types

Operation Description

getBlob

Get the content of the blob. You can restrict the output of this operation to a blob range.

deleteBlob

Delete the blob.

listBlobs

List the blobs.

Block blob operations

Operation Description

updateBlockBlob

Put block blob content that either creates a new block blob or overwrites the existing block blob content.

uploadBlobBlocks

Upload block blob content, by first generating a sequence of blob blocks and then committing them to a blob. If you enable the message CommitBlockListLater property, you can execute the commit later with the commitBlobBlockList operation. You can later update individual block blobs.

commitBlobBlockList

Commit a sequence of blob blocks to the block list that you previously uploaded to the blob service (by using the updateBlockBlob operation with the message CommitBlockListLater property enabled).

getBlobBlockList

Get the block blob list.

Append blob operations

Operation Description

createAppendBlob

Create an append block. By default, if the block already exists then it is not reset. Note that you can alternately create an append blob by enabling the message AppendBlobCreated property and using the updateAppendBlob operation.

updateAppendBlob

Append the new content to the blob. This operation also creates the blob if it does not already exist and if you enabled a message AppendBlobCreated property.

Page Block operations

Operation Description

createPageBlob

Create a page block. By default, if the block already exists then it is not reset. Note that you can also create a page blob (and set its contents) by enabling a message PageBlobCreated property and by using the updatePageBlob operation.

updatePageBlob

Create a page block (unless you enable a message PageBlobCreated property and the identically named block already exists) and set the content of this blob.

resizePageBlob

Resize the page blob.

clearPageBlob

Clear the page blob.

getPageBlobRanges

Get the page blob page ranges.

Azure Blob Client configuration

If your Camel application is running behind a firewall or if you need more control over the Azure Blob Client configuration, you can create your own instance:

StorageCredentials credentials = new StorageCredentialsAccountAndKey(accountName, accessKey);
CloudBlob client = new CloudBlockBlob(URI.create("https://"
                    + accountName + ".blob.core.windows.net/" + containerName
                    + "/" + fileName), credentials);
registry.bind("azureBlobClient", client);

Then refer to this instance in your Camel azure-blob component configuration:

from("azure-blob://" + accountName + "/" + containerName + "/" + fileName + "?azureBlobClient=#client")
.to("mock:result");

Dynamic blob names

The producer supports overriding the default blob name from a message header as shown below:

   .setHeader("CamelAzureOverrideBlobName", constant("myNewBlob"))
    .to("azure-blob://myacount/mycontainer/myblob")

Here the producer would normally use myBlob as the blob name, but the header will override this and use myNewBlob instead. This allow for dynamic blob names.

Dependencies

Maven users will need to add the following dependency to their pom.xml.

pom.xml

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-azure</artifactId>
    <version>${camel-version}</version>
</dependency>

where ${camel-version} must be replaced by the actual version of Camel.

Spring Boot Auto-Configuration

When using azure with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-azure-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 37 options, which are listed below.

Name Description Default Type

camel.component.azure-blob.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.azure-blob.azure-blob-client

The blob service client. The option is a com.microsoft.azure.storage.blob.CloudBlob type.

CloudBlob

camel.component.azure-blob.blob-metadata

Set the blob meta-data

Map

camel.component.azure-blob.blob-offset

Set the blob offset for the upload or download operations, default is 0

0

Long

camel.component.azure-blob.blob-prefix

Set a prefix which can be used for listing the blobs

String

camel.component.azure-blob.blob-type

Set a blob type, 'blockblob' is default

BlobType

camel.component.azure-blob.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.azure-blob.close-stream-after-read

Close the stream after read or keep it open, default is true

true

Boolean

camel.component.azure-blob.close-stream-after-write

Close the stream after write or keep it open, default is true

true

Boolean

camel.component.azure-blob.configuration

The Blob Service configuration. The option is a org.apache.camel.component.azure.blob.BlobServiceConfiguration type.

BlobServiceConfiguration

camel.component.azure-blob.credentials

Set the storage credentials, required in most cases. The option is a com.microsoft.azure.storage.StorageCredentials type.

StorageCredentials

camel.component.azure-blob.credentials-account-key

Set the storage account key used during authentication phase

String

camel.component.azure-blob.credentials-account-name

Set the storage account name used during authentication phase

String

camel.component.azure-blob.data-length

Set the data length for the download or page blob upload operations

Long

camel.component.azure-blob.enabled

Whether to enable auto configuration of the azure-blob component. This is enabled by default.

Boolean

camel.component.azure-blob.file-dir

Set the file directory where the downloaded blobs will be saved to

String

camel.component.azure-blob.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.azure-blob.operation

Blob service operation hint to the producer

BlobServiceOperations

camel.component.azure-blob.public-for-read

Storage resources can be public for reading their content, if this property is enabled then the credentials do not have to be set

false

Boolean

camel.component.azure-blob.stream-read-size

Set the minimum read size in bytes when reading the blob content

Integer

camel.component.azure-blob.stream-write-size

Set the size of the buffer for writing block and page blocks

Integer

camel.component.azure-blob.use-flat-listing

Specify if the flat or hierarchical blob listing should be used

true

Boolean

camel.component.azure-blob.validate-client-u-r-i

Whether to validate the Azure client URI

true

Boolean

camel.component.azure-queue.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.azure-queue.azure-queue-client

The queue service client. The option is a com.microsoft.azure.storage.queue.CloudQueue type.

CloudQueue

camel.component.azure-queue.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.azure-queue.configuration

The Queue Service configuration. The option is a org.apache.camel.component.azure.queue.QueueServiceConfiguration type.

QueueServiceConfiguration

camel.component.azure-queue.credentials

Set the storage credentials, required in most cases. The option is a com.microsoft.azure.storage.StorageCredentials type.

StorageCredentials

camel.component.azure-queue.credentials-account-key

Set the storage account key used during authentication phase

String

camel.component.azure-queue.credentials-account-name

Set the storage account name used during authentication phase

String

camel.component.azure-queue.enabled

Whether to enable auto configuration of the azure-queue component. This is enabled by default.

Boolean

camel.component.azure-queue.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.azure-queue.message-time-to-live

Message Time To Live in seconds

Integer

camel.component.azure-queue.message-visibility-delay

Message Visibility Delay in seconds

Integer

camel.component.azure-queue.operation

Queue service operation hint to the producer

QueueServiceOperations

camel.component.azure-queue.queue-prefix

Set a prefix which can be used for listing the queues

String

camel.component.azure-queue.validate-client-u-r-i

Whether to validate the Azure client URI

true

Boolean