JDBC

Since Camel 1.2

Only producer is supported

The JDBC component enables you to access databases through JDBC, where SQL queries (SELECT) and operations (INSERT, UPDATE, etc) are sent in the message body. This component uses the standard JDBC API, unlike the SQL Component component, which uses spring-jdbc.

Maven users will need to add the following dependency to their pom.xml for this component:

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-jdbc</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

This component can only be used to define producer endpoints, which means that you cannot use the JDBC component in a from() statement.

URI format

jdbc:dataSourceName[?options]

This component only supports producer endpoints.

You can append query options to the URI in the following format, ?option=value&option=value&…​

Options

The JDBC component supports 3 options, which are listed below.

Name Description Default Type

dataSource (producer)

To use the DataSource instance instead of looking up the data source by name from the registry.

DataSource

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

The JDBC endpoint is configured using URI syntax:

jdbc:dataSourceName

with the following path and query parameters:

Path Parameters (1 parameters):

Name Description Default Type

dataSourceName

Required Name of DataSource to lookup in the Registry. If the name is dataSource or default, then Camel will attempt to lookup a default DataSource from the registry, meaning if there is a only one instance of DataSource found, then this DataSource will be used.

String

Query Parameters (14 parameters):

Name Description Default Type

allowNamedParameters (producer)

Whether to allow using named parameters in the queries.

true

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

outputClass (producer)

Specify the full package and class name to use as conversion when outputType=SelectOne or SelectList.

String

outputType (producer)

Determines the output the producer should use. There are 3 enums and the value can be one of: SelectOne, SelectList, StreamList

SelectList

JdbcOutputType

parameters (producer)

Optional parameters to the java.sql.Statement. For example to set maxRows, fetchSize etc.

Map

readSize (producer)

The default maximum number of rows that can be read by a polling query. The default value is 0.

int

resetAutoCommit (producer)

Camel will set the autoCommit on the JDBC connection to be false, commit the change after executed the statement and reset the autoCommit flag of the connection at the end, if the resetAutoCommit is true. If the JDBC connection doesn’t support to reset the autoCommit flag, you can set the resetAutoCommit flag to be false, and Camel will not try to reset the autoCommit flag. When used with XA transactions you most likely need to set it to false so that the transaction manager is in charge of committing this tx.

true

boolean

transacted (producer)

Whether transactions are in use.

false

boolean

useGetBytesForBlob (producer)

To read BLOB columns as bytes instead of string data. This may be needed for certain databases such as Oracle where you must read BLOB columns as bytes.

false

boolean

useHeadersAsParameters (producer)

Set this option to true to use the prepareStatementStrategy with named parameters. This allows to define queries with named placeholders, and use headers with the dynamic values for the query placeholders.

false

boolean

useJDBC4ColumnNameAndLabel​Semantics (producer)

Sets whether to use JDBC 4 or JDBC 3.0 or older semantic when retrieving column name. JDBC 4.0 uses columnLabel to get the column name where as JDBC 3.0 uses both columnName or columnLabel. Unfortunately JDBC drivers behave differently so you can use this option to work out issues around your JDBC driver if you get problem using this component This option is default true.

true

boolean

beanRowMapper (advanced)

To use a custom org.apache.camel.component.jdbc.BeanRowMapper when using outputClass. The default implementation will lower case the row names and skip underscores, and dashes. For example CUST_ID is mapped as custId.

BeanRowMapper

prepareStatementStrategy (advanced)

Allows the plugin to use a custom org.apache.camel.component.jdbc.JdbcPrepareStatementStrategy to control preparation of the query and prepared statement.

JdbcPrepareStatementStrategy

synchronous (advanced)

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

boolean

Result

By default the result is returned in the OUT body as an ArrayList<HashMap<String, Object>>. The List object contains the list of rows and the Map objects contain each row with the String key as the column name. You can use the option outputType to control the result.

Note: This component fetches ResultSetMetaData to be able to return the column name as the key in the Map.

Message Headers

Header Description

CamelJdbcRowCount

If the query is a SELECT, query the row count is returned in this OUT header.

CamelJdbcUpdateCount

If the query is an UPDATE, query the update count is returned in this OUT header.

CamelGeneratedKeysRows

Rows that contains the generated keys.

CamelGeneratedKeysRowCount

The number of rows in the header that contains generated keys.

CamelJdbcColumnNames

The column names from the ResultSet as a java.util.Set type.

CamelJdbcParametes

A java.util.Map which has the headers to be used if useHeadersAsParameters has been enabled.

Generated keys

Since Camel 2.10

If you insert data using SQL INSERT, then the RDBMS may support auto generated keys. You can instruct the JDBC producer to return the generated keys in headers.
To do that set the header CamelRetrieveGeneratedKeys=true. Then the generated keys will be provided as headers with the keys listed in the table above.

Using generated keys does not work with together with named parameters.

Using named parameters

Since Camel 2.12

In the given route below, we want to get all the projects from the projects table. Notice the SQL query has 2 named parameters, :?lic and :?min.
Camel will then lookup these parameters from the message headers. Notice in the example above we set two headers with constant value for the named parameters:

  from("direct:projects")
     .setHeader("lic", constant("ASF"))
     .setHeader("min", constant(123))
     .setBody("select * from projects where license = :?lic and id > :?min order by id")
     .to("jdbc:myDataSource?useHeadersAsParameters=true")

You can also store the header values in a java.util.Map and store the map on the headers with the key CamelJdbcParameters.

Samples

In the following example, we fetch the rows from the customer table.

First we register our datasource in the Camel registry as testdb:

Then we configure a route that routes to the JDBC component, so the SQL will be executed. Note how we refer to the testdb datasource that was bound in the previous step:

Or you can create a DataSource in Spring like this:

With spring xml:

<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xmlns:jdbc="http://www.springframework.org/schema/jdbc"
       xsi:schemaLocation="http://www.springframework.org/schema/beans
                           http://www.springframework.org/schema/beans/spring-beans.xsd
                           http://camel.apache.org/schema/spring
                           http://camel.apache.org/schema/spring/camel-spring.xsd
                           http://www.springframework.org/schema/jdbc
                           http://www.springframework.org/schema/jdbc/spring-jdbc-3.0.xsd
                           http://activemq.apache.org/schema/core
                           http://activemq.apache.org/schema/core/activemq-core.xsd">

  <!--  PROPERTY PLACEHOLDERS  -->
  <!--
       You may use property placeholders data store configuration
       for to do that, you can resolve this properties with srping
  -->
  <bean id="db" class="org.apache.camel.spring.spi.BridgePropertyPlaceholderConfigurer">
    <property name="location" value="classpath:db.properties"/>
  </bean>

  <!-- DATA STORE CONFIGURATION -->

  <!--
       In this example the DataStore is a postgres database, you can change the jdbc connector.
       Also, the property testWhileIdle and validationQuery keep connection open.
  -->

  <bean id="DataStore" class="org.apache.commons.dbcp.BasicDataSource" destroy-method="close">
    <property name="driverClassName" value="org.postgresql.Driver" />
    <property name="url" value="jdbc:postgresql://${DB_HOST}/${DB_NAME}"/>
    <property name="username" value="${DB_USER}" />
    <property name="password" value="${DB_PASS}" />
    <property name="initialSize" value="4"/>
    <property name="maxActive" value="15"/>
    <property name="maxIdle" value="16"/>
    <property name="minIdle" value="8"/>
    <property name="timeBetweenEvictionRunsMillis" value="1800"/>
    <property name="minEvictableIdleTimeMillis" value="1800"/>
    <property name="testOnBorrow" value="true"/>
    <property name="testWhileIdle" value="true"/>
    <property name="testOnReturn" value="true"/>
    <property name="validationQuery" value="SELECT 1"/>
    <property name="maxWait"  value="1000"/>
    <property name="removeAbandoned" value="true"/>
    <property name="logAbandoned" value="true"/>
    <property name="removeAbandonedTimeout" value="30000"/>
  </bean>

  <!-- You shuould write a file with an script to initialize your database.
  If you have nothing to do with your database, then you can write just a
  validation query like 'SELECT *; '-->
  <jdbc:initialize-database data-source="DataStore" enabled="true">
    <jdbc:script location="classpath:datastore-schema.sql" />
  </jdbc:initialize-database>

  <camelContext xmlns="http://camel.apache.org/schema/spring">

    <!-- CAMEL ROUTE -->
    <route id="Reporter">
      <from uri="direct:to-datastore"/>
      <!-- this example is done with camel-jdbc but you can make it work with camel-sql -->
      <setBody>
        <simple>insert into test '${body[value]}'</simple>
      </setBody>
      <to uri="jdbc:DataStore"/>
    </route>

We create an endpoint, add the SQL query to the body of the IN message, and then send the exchange. The result of the query is returned in the OUT body:

If you want to work on the rows one by one instead of the entire ResultSet at once you need to use the Splitter EIP such as:

from("direct:hello")
// here we split the data from the testdb into new messages one by one
// so the mock endpoint will receive a message per row in the table
// the StreamList option allows to stream the result of the query without creating a List of rows
// and notice we also enable streaming mode on the splitter
.to("jdbc:testdb?outputType=StreamList")
  .split(body()).streaming()
  .to("mock:result");

Sample - Polling the database every minute

If we want to poll a database using the JDBC component, we need to combine it with a polling scheduler such as the Timer or Quartz etc. In the following example, we retrieve data from the database every 60 seconds:

from("timer://foo?period=60000")
  .setBody(constant("select * from customer"))
  .to("jdbc:testdb")
  .to("activemq:queue:customers");

Sample - Move Data Between Data Sources

A common use case is to query for data, process it and move it to another data source (ETL operations). In the following example, we retrieve new customer records from the source table every hour, filter/transform them and move them to a destination table:

from("timer://MoveNewCustomersEveryHour?period=3600000")
    .setBody(constant("select * from customer where create_time > (sysdate-1/24)"))
    .to("jdbc:testdb")
    .split(body())
        .process(new MyCustomerProcessor()) //filter/transform results as needed
        .setBody(simple("insert into processed_customer values('${body[ID]}','${body[NAME]}')"))
        .to("jdbc:testdb");

Spring Boot Auto-Configuration

When using jdbc with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-jdbc-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 3 options, which are listed below.

Name Description Default Type

camel.component.jdbc.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.jdbc.enabled

Whether to enable auto configuration of the jdbc component. This is enabled by default.

Boolean

camel.component.jdbc.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean