Ignite ID Generator

Since Camel 2.17

Only producer is supported

The Ignite ID Generator endpoint is one of camel-ignite endpoints which allows you to interact with Ignite Atomic Sequences and ID Generators.

This endpoint only supports producers.

Options

The Ignite ID Generator component supports 5 options, which are listed below.

Name Description Default Type

configurationResource (producer)

The resource from where to load the configuration. It can be a: URL, String or InputStream type.

Object

ignite (producer)

To use an existing Ignite instance.

Ignite

igniteConfiguration (producer)

Allows the user to set a programmatic ignite configuration.

IgniteConfiguration

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

basicPropertyBinding (advanced)

Deprecated Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

boolean

The Ignite ID Generator endpoint is configured using URI syntax:

ignite-idgen:name

with the following path and query parameters:

Path Parameters (1 parameters):

Name Description Default Type

name

Required The sequence name.

String

Query Parameters (8 parameters):

Name Description Default Type

batchSize (producer)

The batch size.

Integer

initialValue (producer)

The initial value.

0

Long

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

operation (producer)

The operation to invoke on the Ignite ID Generator. Superseded by the IgniteConstants.IGNITE_IDGEN_OPERATION header in the IN message. Possible values: ADD_AND_GET, GET, GET_AND_ADD, GET_AND_INCREMENT, INCREMENT_AND_GET. There are 5 enums and the value can be one of: ADD_AND_GET, GET, GET_AND_ADD, GET_AND_INCREMENT, INCREMENT_AND_GET

IgniteIdGenOperation

propagateIncomingBodyIfNo​ReturnValue (producer)

Sets whether to propagate the incoming body if the return type of the underlying Ignite operation is void.

true

boolean

treatCollectionsAsCacheObjects (producer)

Sets whether to treat Collections as cache objects or as Collections of items to insert/update/compute, etc.

false

boolean

basicPropertyBinding (advanced)

Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

boolean

synchronous (advanced)

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

boolean

Spring Boot Auto-Configuration

When using ignite with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-ignite-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 44 options, which are listed below.

Name Description Default Type

camel.component.ignite-cache.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.ignite-cache.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.ignite-cache.configuration-resource

The resource from where to load the configuration. It can be a: URL, String or InputStream type. The option is a java.lang.Object type.

Object

camel.component.ignite-cache.enabled

Whether to enable auto configuration of the ignite-cache component. This is enabled by default.

Boolean

camel.component.ignite-cache.ignite

To use an existing Ignite instance. The option is a org.apache.ignite.Ignite type.

Ignite

camel.component.ignite-cache.ignite-configuration

Allows the user to set a programmatic ignite configuration. The option is a org.apache.ignite.configuration.IgniteConfiguration type.

IgniteConfiguration

camel.component.ignite-cache.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.ignite-compute.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.ignite-compute.configuration-resource

The resource from where to load the configuration. It can be a: URL, String or InputStream type. The option is a java.lang.Object type.

Object

camel.component.ignite-compute.enabled

Whether to enable auto configuration of the ignite-compute component. This is enabled by default.

Boolean

camel.component.ignite-compute.ignite

To use an existing Ignite instance. The option is a org.apache.ignite.Ignite type.

Ignite

camel.component.ignite-compute.ignite-configuration

Allows the user to set a programmatic ignite configuration. The option is a org.apache.ignite.configuration.IgniteConfiguration type.

IgniteConfiguration

camel.component.ignite-compute.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.ignite-events.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.ignite-events.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.ignite-events.configuration-resource

The resource from where to load the configuration. It can be a: URL, String or InputStream type. The option is a java.lang.Object type.

Object

camel.component.ignite-events.enabled

Whether to enable auto configuration of the ignite-events component. This is enabled by default.

Boolean

camel.component.ignite-events.ignite

To use an existing Ignite instance. The option is a org.apache.ignite.Ignite type.

Ignite

camel.component.ignite-events.ignite-configuration

Allows the user to set a programmatic ignite configuration. The option is a org.apache.ignite.configuration.IgniteConfiguration type.

IgniteConfiguration

camel.component.ignite-idgen.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.ignite-idgen.configuration-resource

The resource from where to load the configuration. It can be a: URL, String or InputStream type. The option is a java.lang.Object type.

Object

camel.component.ignite-idgen.enabled

Whether to enable auto configuration of the ignite-idgen component. This is enabled by default.

Boolean

camel.component.ignite-idgen.ignite

To use an existing Ignite instance. The option is a org.apache.ignite.Ignite type.

Ignite

camel.component.ignite-idgen.ignite-configuration

Allows the user to set a programmatic ignite configuration. The option is a org.apache.ignite.configuration.IgniteConfiguration type.

IgniteConfiguration

camel.component.ignite-idgen.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.ignite-messaging.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.ignite-messaging.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.ignite-messaging.configuration-resource

The resource from where to load the configuration. It can be a: URL, String or InputStream type. The option is a java.lang.Object type.

Object

camel.component.ignite-messaging.enabled

Whether to enable auto configuration of the ignite-messaging component. This is enabled by default.

Boolean

camel.component.ignite-messaging.ignite

To use an existing Ignite instance. The option is a org.apache.ignite.Ignite type.

Ignite

camel.component.ignite-messaging.ignite-configuration

Allows the user to set a programmatic ignite configuration. The option is a org.apache.ignite.configuration.IgniteConfiguration type.

IgniteConfiguration

camel.component.ignite-messaging.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.ignite-queue.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.ignite-queue.configuration-resource

The resource from where to load the configuration. It can be a: URL, String or InputStream type. The option is a java.lang.Object type.

Object

camel.component.ignite-queue.enabled

Whether to enable auto configuration of the ignite-queue component. This is enabled by default.

Boolean

camel.component.ignite-queue.ignite

To use an existing Ignite instance. The option is a org.apache.ignite.Ignite type.

Ignite

camel.component.ignite-queue.ignite-configuration

Allows the user to set a programmatic ignite configuration. The option is a org.apache.ignite.configuration.IgniteConfiguration type.

IgniteConfiguration

camel.component.ignite-queue.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.ignite-set.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.ignite-set.configuration-resource

The resource from where to load the configuration. It can be a: URL, String or InputStream type. The option is a java.lang.Object type.

Object

camel.component.ignite-set.enabled

Whether to enable auto configuration of the ignite-set component. This is enabled by default.

Boolean

camel.component.ignite-set.ignite

To use an existing Ignite instance. The option is a org.apache.ignite.Ignite type.

Ignite

camel.component.ignite-set.ignite-configuration

Allows the user to set a programmatic ignite configuration. The option is a org.apache.ignite.configuration.IgniteConfiguration type.

IgniteConfiguration

camel.component.ignite-set.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean