Bean

Since Camel 1.0

Only producer is supported

The Bean component binds beans to Camel message exchanges.

URI format

bean:beanName[?options]

Where beanID can be any string which is used to look up the bean in the Registry

Options

The Bean component supports 4 options, which are listed below.

Name Description Default Type

cache (producer)

Deprecated Use singleton option instead.

true

Boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

scope (producer)

Scope of bean. When using singleton scope (default) the bean is created or looked up only once and reused for the lifetime of the endpoint. The bean should be thread-safe in case concurrent threads is calling the bean at the same time. When using request scope the bean is created or looked up once per request (exchange). This can be used if you want to store state on a bean while processing a request and you want to call the same bean instance multiple times while processing the request. The bean does not have to be thread-safe as the instance is only called from the same request. When using delegate scope, then the bean will be looked up or created per call. However in case of lookup then this is delegated to the bean registry such as Spring or CDI (if in use), which depends on their configuration can act as either singleton or prototype scope. so when using prototype then this depends on the delegated registry. There are 3 enums and the value can be one of: Singleton, Request, Prototype

Singleton

BeanScope

basicPropertyBinding (advanced)

Deprecated Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

boolean

The Bean endpoint is configured using URI syntax:

bean:beanName

with the following path and query parameters:

Path Parameters (1 parameters):

Name Description Default Type

beanName

Required Sets the name of the bean to invoke

String

Query Parameters (7 parameters):

Name Description Default Type

cache (common)

Deprecated Use scope option instead.

Boolean

method (common)

Sets the name of the method to invoke on the bean

String

scope (common)

Scope of bean. When using singleton scope (default) the bean is created or looked up only once and reused for the lifetime of the endpoint. The bean should be thread-safe in case concurrent threads is calling the bean at the same time. When using request scope the bean is created or looked up once per request (exchange). This can be used if you want to store state on a bean while processing a request and you want to call the same bean instance multiple times while processing the request. The bean does not have to be thread-safe as the instance is only called from the same request. When using prototype scope, then the bean will be looked up or created per call. However in case of lookup then this is delegated to the bean registry such as Spring or CDI (if in use), which depends on their configuration can act as either singleton or prototype scope. so when using prototype then this depends on the delegated registry. There are 3 enums and the value can be one of: Singleton, Request, Prototype

Singleton

BeanScope

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

basicPropertyBinding (advanced)

Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

boolean

parameters (advanced)

Used for configuring additional properties on the bean

Map

synchronous (advanced)

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

boolean

You can append query options to the URI in the following format, ?option=value&option=value&…​

Using

The object instance that is used to consume messages must be explicitly registered with the Registry. For example, if you are using Spring you must define the bean in the Spring configuration XML file.

You can also register beans manually via Camel’s Registry with the bind method.

Once an endpoint has been registered, you can build Camel routes that use it to process exchanges.

A bean: endpoint cannot be defined as the input to the route; i.e. you cannot consume from it, you can only route from some inbound message Endpoint to the bean endpoint as output. So consider using a direct: or queue: endpoint as the input.

You can use the createProxy() methods on ProxyHelper to create a proxy that will generate exchanges and send them to any endpoint:

And the same route using Spring DSL:

<route>
   <from uri="direct:hello">
   <to uri="bean:bye"/>
</route>

Bean as endpoint

Camel also supports invoking Bean as an Endpoint. In the route below:

What happens is that when the exchange is routed to the myBean Camel will use the Bean Binding to invoke the bean.
The source for the bean is just a plain POJO:

Camel will use Bean Binding to invoke the sayHello method, by converting the Exchange’s In body to the String type and storing the output of the method on the Exchange Out body.

Java DSL bean syntax

Java DSL comes with syntactic sugar for the Bean component. Instead of specifying the bean explicitly as the endpoint (i.e. to("bean:beanName")) you can use the following syntax:

// Send message to the bean endpoint
// and invoke method resolved using Bean Binding.
from("direct:start").bean("beanName");

// Send message to the bean endpoint
// and invoke given method.
from("direct:start").bean("beanName", "methodName");

Instead of passing name of the reference to the bean (so that Camel will lookup for it in the registry), you can specify the bean itself:

// Send message to the given bean instance.
from("direct:start").bean(new ExampleBean());

// Explicit selection of bean method to be invoked.
from("direct:start").bean(new ExampleBean(), "methodName");

// Camel will create the instance of bean and cache it for you.
from("direct:start").bean(ExampleBean.class);

Bean Binding

How bean methods to be invoked are chosen (if they are not specified explicitly through the method parameter) and how parameter values are constructed from the Message are all defined by the Bean Binding mechanism which is used throughout all of the various Bean Integration mechanisms in Camel.

Spring Boot Auto-Configuration

When using bean with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-bean-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 13 options, which are listed below.

Name Description Default Type

camel.component.bean.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.bean.enabled

Whether to enable auto configuration of the bean component. This is enabled by default.

Boolean

camel.component.bean.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.bean.scope

Scope of bean. When using singleton scope (default) the bean is created or looked up only once and reused for the lifetime of the endpoint. The bean should be thread-safe in case concurrent threads is calling the bean at the same time. When using request scope the bean is created or looked up once per request (exchange). This can be used if you want to store state on a bean while processing a request and you want to call the same bean instance multiple times while processing the request. The bean does not have to be thread-safe as the instance is only called from the same request. When using delegate scope, then the bean will be looked up or created per call. However in case of lookup then this is delegated to the bean registry such as Spring or CDI (if in use), which depends on their configuration can act as either singleton or prototype scope. so when using prototype then this depends on the delegated registry.

BeanScope

camel.component.class.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.class.enabled

Whether to enable auto configuration of the class component. This is enabled by default.

Boolean

camel.component.class.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.class.scope

Scope of bean. When using singleton scope (default) the bean is created or looked up only once and reused for the lifetime of the endpoint. The bean should be thread-safe in case concurrent threads is calling the bean at the same time. When using request scope the bean is created or looked up once per request (exchange). This can be used if you want to store state on a bean while processing a request and you want to call the same bean instance multiple times while processing the request. The bean does not have to be thread-safe as the instance is only called from the same request. When using delegate scope, then the bean will be looked up or created per call. However in case of lookup then this is delegated to the bean registry such as Spring or CDI (if in use), which depends on their configuration can act as either singleton or prototype scope. so when using prototype then this depends on the delegated registry.

BeanScope

camel.language.bean.enabled

Whether to enable auto configuration of the bean language. This is enabled by default.

Boolean

camel.language.bean.scope

Scope of bean. When using singleton scope (default) the bean is created or looked up only once and reused for the lifetime of the endpoint. The bean should be thread-safe in case concurrent threads is calling the bean at the same time. When using request scope the bean is created or looked up once per request (exchange). This can be used if you want to store state on a bean while processing a request and you want to call the same bean instance multiple times while processing the request. The bean does not have to be thread-safe as the instance is only called from the same request. When using prototype scope, then the bean will be looked up or created per call. However in case of lookup then this is delegated to the bean registry such as Spring or CDI (if in use), which depends on their configuration can act as either singleton or prototype scope. so when using prototype scope then this depends on the bean registry implementation.

Singleton

String

camel.language.bean.trim

Whether to trim the value to remove leading and trailing whitespaces and line breaks

true

Boolean

camel.component.bean.cache

Deprecated Use singleton option instead.

true

Boolean

camel.component.class.cache

Deprecated Use singleton option instead.

true

Boolean