camel-mina-kafka-connector sink configuration

When using camel-mina-kafka-connector as sink make sure to use the following Maven dependency to have support for the connector:

<dependency>
  <groupId>org.apache.camel.kafkaconnector</groupId>
  <artifactId>camel-mina-kafka-connector</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel Kafka connector version -->
</dependency>

To use this Sink connector in Kafka connect you’ll need to set the following connector.class

connector.class=org.apache.camel.kafkaconnector.mina.CamelMinaSinkConnector

The camel-mina sink connector supports 50 options, which are listed below.

Name	Description	Default	Required	Priority
camel.sink.path.protocol	Protocol to use	null	true	HIGH
camel.sink.path.host	Hostname to use. Use localhost or 0.0.0.0 for local server as consumer. For producer use the hostname or ip address of the remote server.	null	true	HIGH
camel.sink.path.port	Port number	null	true	HIGH
camel.sink.endpoint.disconnect	Whether or not to disconnect(close) from Mina session right after use. Can be used for both consumer and producer.	false	false	MEDIUM
camel.sink.endpoint.minaLogger	You can enable the Apache MINA logging filter. Apache MINA uses slf4j logging at INFO level to log all input and output.	false	false	MEDIUM
camel.sink.endpoint.sync	Setting to set endpoint as one-way or request-response.	true	false	MEDIUM
camel.sink.endpoint.timeout	You can configure the timeout that specifies how long to wait for a response from a remote server. The timeout unit is in milliseconds, so 60000 is 60 seconds.	30000L	false	MEDIUM
camel.sink.endpoint.writeTimeout	Maximum amount of time it should take to send data to the MINA session. Default is 10000 milliseconds.	10000L	false	MEDIUM
camel.sink.endpoint.lazyStartProducer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	false	MEDIUM
camel.sink.endpoint.cachedAddress	Whether to create the InetAddress once and reuse. Setting this to false allows to pickup DNS changes in the network.	true	false	MEDIUM
camel.sink.endpoint.lazySessionCreation	Sessions can be lazily created to avoid exceptions, if the remote server is not up and running when the Camel producer is started.	true	false	MEDIUM
camel.sink.endpoint.basicPropertyBinding	Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	false	MEDIUM
camel.sink.endpoint.maximumPoolSize	Number of worker threads in the worker pool for TCP and UDP	16	false	MEDIUM
camel.sink.endpoint.orderedThreadPoolExecutor	Whether to use ordered thread pool, to ensure events are processed orderly on the same channel.	true	false	MEDIUM
camel.sink.endpoint.synchronous	Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).	false	false	MEDIUM
camel.sink.endpoint.transferExchange	Only used for TCP. You can transfer the exchange over the wire instead of just the body. The following fields are transferred: In body, Out body, fault body, In headers, Out headers, fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level.	false	false	MEDIUM
camel.sink.endpoint.allowDefaultCodec	The mina component installs a default codec if both, codec is null and textline is false. Setting allowDefaultCodec to false prevents the mina component from installing a default codec as the first element in the filter chain. This is useful in scenarios where another filter must be the first in the filter chain, like the SSL filter.	true	false	MEDIUM
camel.sink.endpoint.codec	To use a custom minda codec implementation.	null	false	MEDIUM
camel.sink.endpoint.decoderMaxLineLength	To set the textline protocol decoder max line length. By default the default value of Mina itself is used which are 1024.	1024	false	MEDIUM
camel.sink.endpoint.encoderMaxLineLength	To set the textline protocol encoder max line length. By default the default value of Mina itself is used which are Integer.MAX_VALUE.	-1	false	MEDIUM
camel.sink.endpoint.encoding	You can configure the encoding (a charset name) to use for the TCP textline codec and the UDP protocol. If not provided, Camel will use the JVM default Charset	null	false	MEDIUM
camel.sink.endpoint.filters	You can set a list of Mina IoFilters to use.	null	false	MEDIUM
camel.sink.endpoint.textline	Only used for TCP. If no codec is specified, you can use this flag to indicate a text line based codec; if not specified or the value is false, then Object Serialization is assumed over TCP.	false	false	MEDIUM
camel.sink.endpoint.textlineDelimiter	Only used for TCP and if textline=true. Sets the text line delimiter to use. If none provided, Camel will use DEFAULT. This delimiter is used to mark the end of text. One of: [DEFAULT] [AUTO] [UNIX] [WINDOWS] [MAC]	null	false	MEDIUM
camel.sink.endpoint.autoStartTls	Whether to auto start SSL handshake.	true	false	MEDIUM
camel.sink.endpoint.sslContextParameters	To configure SSL security.	null	false	MEDIUM
camel.component.mina.disconnect	Whether or not to disconnect(close) from Mina session right after use. Can be used for both consumer and producer.	false	false	MEDIUM
camel.component.mina.minaLogger	You can enable the Apache MINA logging filter. Apache MINA uses slf4j logging at INFO level to log all input and output.	false	false	MEDIUM
camel.component.mina.sync	Setting to set endpoint as one-way or request-response.	true	false	MEDIUM
camel.component.mina.timeout	You can configure the timeout that specifies how long to wait for a response from a remote server. The timeout unit is in milliseconds, so 60000 is 60 seconds.	30000L	false	MEDIUM
camel.component.mina.writeTimeout	Maximum amount of time it should take to send data to the MINA session. Default is 10000 milliseconds.	10000L	false	MEDIUM
camel.component.mina.lazyStartProducer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	false	MEDIUM
camel.component.mina.cachedAddress	Whether to create the InetAddress once and reuse. Setting this to false allows to pickup DNS changes in the network.	true	false	MEDIUM
camel.component.mina.lazySessionCreation	Sessions can be lazily created to avoid exceptions, if the remote server is not up and running when the Camel producer is started.	true	false	MEDIUM
camel.component.mina.basicPropertyBinding	Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	false	LOW
camel.component.mina.configuration	To use the shared mina configuration.	null	false	MEDIUM
camel.component.mina.maximumPoolSize	Number of worker threads in the worker pool for TCP and UDP	16	false	MEDIUM
camel.component.mina.orderedThreadPoolExecutor	Whether to use ordered thread pool, to ensure events are processed orderly on the same channel.	true	false	MEDIUM
camel.component.mina.transferExchange	Only used for TCP. You can transfer the exchange over the wire instead of just the body. The following fields are transferred: In body, Out body, fault body, In headers, Out headers, fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level.	false	false	MEDIUM
camel.component.mina.allowDefaultCodec	The mina component installs a default codec if both, codec is null and textline is false. Setting allowDefaultCodec to false prevents the mina component from installing a default codec as the first element in the filter chain. This is useful in scenarios where another filter must be the first in the filter chain, like the SSL filter.	true	false	MEDIUM
camel.component.mina.codec	To use a custom minda codec implementation.	null	false	MEDIUM
camel.component.mina.decoderMaxLineLength	To set the textline protocol decoder max line length. By default the default value of Mina itself is used which are 1024.	1024	false	MEDIUM
camel.component.mina.encoderMaxLineLength	To set the textline protocol encoder max line length. By default the default value of Mina itself is used which are Integer.MAX_VALUE.	-1	false	MEDIUM
camel.component.mina.encoding	You can configure the encoding (a charset name) to use for the TCP textline codec and the UDP protocol. If not provided, Camel will use the JVM default Charset	null	false	MEDIUM
camel.component.mina.filters	You can set a list of Mina IoFilters to use.	null	false	MEDIUM
camel.component.mina.textline	Only used for TCP. If no codec is specified, you can use this flag to indicate a text line based codec; if not specified or the value is false, then Object Serialization is assumed over TCP.	false	false	MEDIUM
camel.component.mina.textlineDelimiter	Only used for TCP and if textline=true. Sets the text line delimiter to use. If none provided, Camel will use DEFAULT. This delimiter is used to mark the end of text. One of: [DEFAULT] [AUTO] [UNIX] [WINDOWS] [MAC]	null	false	MEDIUM
camel.component.mina.autoStartTls	Whether to auto start SSL handshake.	true	false	MEDIUM
camel.component.mina.sslContextParameters	To configure SSL security.	null	false	MEDIUM
camel.component.mina.useGlobalSslContextParameters	Enable usage of global SSL context parameters.	false	false	MEDIUM

Name

Description

Default

Required

Priority

camel.sink.path.protocol

Protocol to use

null

true

HIGH

camel.sink.path.host

Hostname to use. Use localhost or 0.0.0.0 for local server as consumer. For producer use the hostname or ip address of the remote server.

null

true

HIGH

camel.sink.path.port

Port number

null

true

HIGH

camel.sink.endpoint.disconnect

Whether or not to disconnect(close) from Mina session right after use. Can be used for both consumer and producer.

false

MEDIUM

camel.sink.endpoint.minaLogger

You can enable the Apache MINA logging filter. Apache MINA uses slf4j logging at INFO level to log all input and output.

false

MEDIUM

camel.sink.endpoint.sync

Setting to set endpoint as one-way or request-response.

true

false

MEDIUM

camel.sink.endpoint.timeout

You can configure the timeout that specifies how long to wait for a response from a remote server. The timeout unit is in milliseconds, so 60000 is 60 seconds.

30000L

false

MEDIUM

camel.sink.endpoint.writeTimeout

Maximum amount of time it should take to send data to the MINA session. Default is 10000 milliseconds.

10000L

false

MEDIUM

camel.sink.endpoint.lazyStartProducer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

MEDIUM

camel.sink.endpoint.cachedAddress

Whether to create the InetAddress once and reuse. Setting this to false allows to pickup DNS changes in the network.

true

false

MEDIUM

camel.sink.endpoint.lazySessionCreation

Sessions can be lazily created to avoid exceptions, if the remote server is not up and running when the Camel producer is started.

true

false

MEDIUM

camel.sink.endpoint.basicPropertyBinding

Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.sink.endpoint.maximumPoolSize

Number of worker threads in the worker pool for TCP and UDP

false

MEDIUM

camel.sink.endpoint.orderedThreadPoolExecutor

Whether to use ordered thread pool, to ensure events are processed orderly on the same channel.

true

false

MEDIUM

camel.sink.endpoint.synchronous

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

MEDIUM

camel.sink.endpoint.transferExchange

Only used for TCP. You can transfer the exchange over the wire instead of just the body. The following fields are transferred: In body, Out body, fault body, In headers, Out headers, fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level.

false

MEDIUM

camel.sink.endpoint.allowDefaultCodec

The mina component installs a default codec if both, codec is null and textline is false. Setting allowDefaultCodec to false prevents the mina component from installing a default codec as the first element in the filter chain. This is useful in scenarios where another filter must be the first in the filter chain, like the SSL filter.

true

false

MEDIUM

camel.sink.endpoint.codec

To use a custom minda codec implementation.

null

false

MEDIUM

camel.sink.endpoint.decoderMaxLineLength

To set the textline protocol decoder max line length. By default the default value of Mina itself is used which are 1024.

1024

false

MEDIUM

camel.sink.endpoint.encoderMaxLineLength

To set the textline protocol encoder max line length. By default the default value of Mina itself is used which are Integer.MAX_VALUE.

-1

false

MEDIUM

camel.sink.endpoint.encoding

You can configure the encoding (a charset name) to use for the TCP textline codec and the UDP protocol. If not provided, Camel will use the JVM default Charset

null

false

MEDIUM

camel.sink.endpoint.filters

You can set a list of Mina IoFilters to use.

null

false

MEDIUM

camel.sink.endpoint.textline

Only used for TCP. If no codec is specified, you can use this flag to indicate a text line based codec; if not specified or the value is false, then Object Serialization is assumed over TCP.

false

MEDIUM

camel.sink.endpoint.textlineDelimiter

Only used for TCP and if textline=true. Sets the text line delimiter to use. If none provided, Camel will use DEFAULT. This delimiter is used to mark the end of text. One of: [DEFAULT] [AUTO] [UNIX] [WINDOWS] [MAC]

null

false

MEDIUM

camel.sink.endpoint.autoStartTls

Whether to auto start SSL handshake.

true

false

MEDIUM

camel.sink.endpoint.sslContextParameters

To configure SSL security.

null

false

MEDIUM

camel.component.mina.disconnect

Whether or not to disconnect(close) from Mina session right after use. Can be used for both consumer and producer.

false

MEDIUM

camel.component.mina.minaLogger

You can enable the Apache MINA logging filter. Apache MINA uses slf4j logging at INFO level to log all input and output.

false

MEDIUM

camel.component.mina.sync

Setting to set endpoint as one-way or request-response.

true

false

MEDIUM

camel.component.mina.timeout

You can configure the timeout that specifies how long to wait for a response from a remote server. The timeout unit is in milliseconds, so 60000 is 60 seconds.

30000L

false

MEDIUM

camel.component.mina.writeTimeout

Maximum amount of time it should take to send data to the MINA session. Default is 10000 milliseconds.

10000L

false

MEDIUM

camel.component.mina.lazyStartProducer

false

MEDIUM

camel.component.mina.cachedAddress

Whether to create the InetAddress once and reuse. Setting this to false allows to pickup DNS changes in the network.

true

false

MEDIUM

camel.component.mina.lazySessionCreation

Sessions can be lazily created to avoid exceptions, if the remote server is not up and running when the Camel producer is started.

true

false

MEDIUM

camel.component.mina.basicPropertyBinding

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

LOW

camel.component.mina.configuration

To use the shared mina configuration.

null

false

MEDIUM

camel.component.mina.maximumPoolSize

Number of worker threads in the worker pool for TCP and UDP

false

MEDIUM

camel.component.mina.orderedThreadPoolExecutor

Whether to use ordered thread pool, to ensure events are processed orderly on the same channel.

true

false

MEDIUM

camel.component.mina.transferExchange

false

MEDIUM

camel.component.mina.allowDefaultCodec

true

false

MEDIUM

camel.component.mina.codec

To use a custom minda codec implementation.

null

false

MEDIUM

camel.component.mina.decoderMaxLineLength

To set the textline protocol decoder max line length. By default the default value of Mina itself is used which are 1024.

1024

false

MEDIUM

camel.component.mina.encoderMaxLineLength

To set the textline protocol encoder max line length. By default the default value of Mina itself is used which are Integer.MAX_VALUE.

-1

false

MEDIUM

camel.component.mina.encoding

You can configure the encoding (a charset name) to use for the TCP textline codec and the UDP protocol. If not provided, Camel will use the JVM default Charset

null

false

MEDIUM

camel.component.mina.filters

You can set a list of Mina IoFilters to use.

null

false

MEDIUM

camel.component.mina.textline

Only used for TCP. If no codec is specified, you can use this flag to indicate a text line based codec; if not specified or the value is false, then Object Serialization is assumed over TCP.

false

MEDIUM

camel.component.mina.textlineDelimiter

null

false

MEDIUM

camel.component.mina.autoStartTls

Whether to auto start SSL handshake.

true

false

MEDIUM

camel.component.mina.sslContextParameters

To configure SSL security.

null

false

MEDIUM

camel.component.mina.useGlobalSslContextParameters

Enable usage of global SSL context parameters.

false

MEDIUM

The camel-mina sink connector has no converters out of the box.

The camel-mina sink connector has no transforms out of the box.

The camel-mina sink connector has no aggregation strategies out of the box.