camel-azure-storage-blob-kafka-connector source configuration

When using camel-azure-storage-blob-kafka-connector as source make sure to use the following Maven dependency to have support for the connector:

<dependency>
  <groupId>org.apache.camel.kafkaconnector</groupId>
  <artifactId>camel-azure-storage-blob-kafka-connector</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel Kafka connector version -->
</dependency>

To use this Source connector in Kafka connect you’ll need to set the following connector.class

connector.class=org.apache.camel.kafkaconnector.azurestorageblob.CamelAzurestorageblobSourceConnector

The camel-azure-storage-blob source connector supports 39 options, which are listed below.

Name	Description	Default	Required	Priority
camel.source.path.accountName	Azure account name to be used for authentication with azure blob services	null	false	MEDIUM
camel.source.path.containerName	The blob container name	null	false	MEDIUM
camel.source.endpoint.autoDiscoverClient	Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.	true	false	MEDIUM
camel.source.endpoint.blobName	The blob name, to consume specific blob from a container. However on producer, is only required for the operations on the blob level	null	false	MEDIUM
camel.source.endpoint.blobOffset	Set the blob offset for the upload or download operations, default is 0	0L	false	MEDIUM
camel.source.endpoint.blobServiceClient	Client to a storage account. This client does not hold any state about a particular storage account but is instead a convenient way of sending off appropriate requests to the resource on the service. It may also be used to construct URLs to blobs and containers. This client contains operations on a service account. Operations on a container are available on BlobContainerClient through getBlobContainerClient(String), and operations on a blob are available on BlobClient through getBlobContainerClient(String).getBlobClient(String).	null	false	MEDIUM
camel.source.endpoint.blobType	The blob type in order to initiate the appropriate settings for each blob type One of: [blockblob] [appendblob] [pageblob]	"blockblob"	false	MEDIUM
camel.source.endpoint.closeStreamAfterRead	Close the stream after read or keep it open, default is true	true	false	MEDIUM
camel.source.endpoint.credentials	StorageSharedKeyCredential can be injected to create the azure client, this holds the important authentication information	null	false	MEDIUM
camel.source.endpoint.dataCount	How many bytes to include in the range. Must be greater than or equal to 0 if specified.	null	false	MEDIUM
camel.source.endpoint.fileDir	The file directory where the downloaded blobs will be saved to, this can be used in both, producer and consumer	null	false	MEDIUM
camel.source.endpoint.maxResultsPerPage	Specifies the maximum number of blobs to return, including all BlobPrefix elements. If the request does not specify maxResultsPerPage or specifies a value greater than 5,000, the server will return up to 5,000 items.	null	false	MEDIUM
camel.source.endpoint.maxRetryRequests	Specifies the maximum number of additional HTTP Get requests that will be made while reading the data from a response body.	0	false	MEDIUM
camel.source.endpoint.prefix	Filters the results to return only blobs whose names begin with the specified prefix. May be null to return all blobs.	null	false	MEDIUM
camel.source.endpoint.serviceClient	Client to a storage account. This client does not hold any state about a particular storage account but is instead a convenient way of sending off appropriate requests to the resource on the service. It may also be used to construct URLs to blobs and containers. This client contains operations on a service account. Operations on a container are available on BlobContainerClient through BlobServiceClient#getBlobContainerClient(String), and operations on a blob are available on BlobClient through BlobContainerClient#getBlobClient(String).	null	false	MEDIUM
camel.source.endpoint.timeout	An optional timeout value beyond which a RuntimeException will be raised.	null	false	MEDIUM
camel.source.endpoint.bridgeErrorHandler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	false	MEDIUM
camel.source.endpoint.exceptionHandler	To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.	null	false	MEDIUM
camel.source.endpoint.exchangePattern	Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut]	null	false	MEDIUM
camel.source.endpoint.basicPropertyBinding	Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	false	MEDIUM
camel.source.endpoint.synchronous	Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).	false	false	MEDIUM
camel.source.endpoint.accessKey	Access key for the associated azure account name to be used for authentication with azure blob services	null	false	MEDIUM
camel.component.azure-storage-blob.autoDiscover Client	Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.	true	false	MEDIUM
camel.component.azure-storage-blob.blobName	The blob name, to consume specific blob from a container. However on producer, is only required for the operations on the blob level	null	false	MEDIUM
camel.component.azure-storage-blob.blobOffset	Set the blob offset for the upload or download operations, default is 0	0L	false	MEDIUM
camel.component.azure-storage-blob.blobType	The blob type in order to initiate the appropriate settings for each blob type One of: [blockblob] [appendblob] [pageblob]	"blockblob"	false	MEDIUM
camel.component.azure-storage-blob.closeStream AfterRead	Close the stream after read or keep it open, default is true	true	false	MEDIUM
camel.component.azure-storage-blob.configuration	The component configurations	null	false	MEDIUM
camel.component.azure-storage-blob.credentials	StorageSharedKeyCredential can be injected to create the azure client, this holds the important authentication information	null	false	MEDIUM
camel.component.azure-storage-blob.dataCount	How many bytes to include in the range. Must be greater than or equal to 0 if specified.	null	false	MEDIUM
camel.component.azure-storage-blob.fileDir	The file directory where the downloaded blobs will be saved to, this can be used in both, producer and consumer	null	false	MEDIUM
camel.component.azure-storage-blob.maxResultsPer Page	Specifies the maximum number of blobs to return, including all BlobPrefix elements. If the request does not specify maxResultsPerPage or specifies a value greater than 5,000, the server will return up to 5,000 items.	null	false	MEDIUM
camel.component.azure-storage-blob.maxRetry Requests	Specifies the maximum number of additional HTTP Get requests that will be made while reading the data from a response body.	0	false	MEDIUM
camel.component.azure-storage-blob.prefix	Filters the results to return only blobs whose names begin with the specified prefix. May be null to return all blobs.	null	false	MEDIUM
camel.component.azure-storage-blob.serviceClient	Client to a storage account. This client does not hold any state about a particular storage account but is instead a convenient way of sending off appropriate requests to the resource on the service. It may also be used to construct URLs to blobs and containers. This client contains operations on a service account. Operations on a container are available on BlobContainerClient through BlobServiceClient#getBlobContainerClient(String), and operations on a blob are available on BlobClient through BlobContainerClient#getBlobClient(String).	null	false	MEDIUM
camel.component.azure-storage-blob.timeout	An optional timeout value beyond which a RuntimeException will be raised.	null	false	MEDIUM
camel.component.azure-storage-blob.bridgeError Handler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	false	MEDIUM
camel.component.azure-storage-blob.basicProperty Binding	Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	false	LOW
camel.component.azure-storage-blob.accessKey	Access key for the associated azure account name to be used for authentication with azure blob services	null	false	MEDIUM

Name

Description

Default

Required

Priority

camel.source.path.accountName

Azure account name to be used for authentication with azure blob services

null

false

MEDIUM

camel.source.path.containerName

The blob container name

null

false

MEDIUM

camel.source.endpoint.autoDiscoverClient

Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.

true

false

MEDIUM

camel.source.endpoint.blobName

The blob name, to consume specific blob from a container. However on producer, is only required for the operations on the blob level

null

false

MEDIUM

camel.source.endpoint.blobOffset

Set the blob offset for the upload or download operations, default is 0

false

MEDIUM

camel.source.endpoint.blobServiceClient

Client to a storage account. This client does not hold any state about a particular storage account but is instead a convenient way of sending off appropriate requests to the resource on the service. It may also be used to construct URLs to blobs and containers. This client contains operations on a service account. Operations on a container are available on BlobContainerClient through getBlobContainerClient(String), and operations on a blob are available on BlobClient through getBlobContainerClient(String).getBlobClient(String).

null

false

MEDIUM

camel.source.endpoint.blobType

The blob type in order to initiate the appropriate settings for each blob type One of: [blockblob] [appendblob] [pageblob]

"blockblob"

false

MEDIUM

camel.source.endpoint.closeStreamAfterRead

Close the stream after read or keep it open, default is true

true

false

MEDIUM

camel.source.endpoint.credentials

StorageSharedKeyCredential can be injected to create the azure client, this holds the important authentication information

null

false

MEDIUM

camel.source.endpoint.dataCount

How many bytes to include in the range. Must be greater than or equal to 0 if specified.

null

false

MEDIUM

camel.source.endpoint.fileDir

The file directory where the downloaded blobs will be saved to, this can be used in both, producer and consumer

null

false

MEDIUM

camel.source.endpoint.maxResultsPerPage

Specifies the maximum number of blobs to return, including all BlobPrefix elements. If the request does not specify maxResultsPerPage or specifies a value greater than 5,000, the server will return up to 5,000 items.

null

false

MEDIUM

camel.source.endpoint.maxRetryRequests

Specifies the maximum number of additional HTTP Get requests that will be made while reading the data from a response body.

false

MEDIUM

camel.source.endpoint.prefix

Filters the results to return only blobs whose names begin with the specified prefix. May be null to return all blobs.

null

false

MEDIUM

camel.source.endpoint.serviceClient

Client to a storage account. This client does not hold any state about a particular storage account but is instead a convenient way of sending off appropriate requests to the resource on the service. It may also be used to construct URLs to blobs and containers. This client contains operations on a service account. Operations on a container are available on BlobContainerClient through BlobServiceClient#getBlobContainerClient(String), and operations on a blob are available on BlobClient through BlobContainerClient#getBlobClient(String).

null

false

MEDIUM

camel.source.endpoint.timeout

An optional timeout value beyond which a RuntimeException will be raised.

null

false

MEDIUM

camel.source.endpoint.bridgeErrorHandler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

MEDIUM

camel.source.endpoint.exceptionHandler

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

null

false

MEDIUM

camel.source.endpoint.exchangePattern

Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut]

null

false

MEDIUM

camel.source.endpoint.basicPropertyBinding

Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.source.endpoint.synchronous

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

MEDIUM

camel.source.endpoint.accessKey

Access key for the associated azure account name to be used for authentication with azure blob services

null

false

MEDIUM

camel.component.azure-storage-blob.autoDiscover Client

Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking.

true

false

MEDIUM

camel.component.azure-storage-blob.blobName

The blob name, to consume specific blob from a container. However on producer, is only required for the operations on the blob level

null

false

MEDIUM

camel.component.azure-storage-blob.blobOffset

Set the blob offset for the upload or download operations, default is 0

false

MEDIUM

camel.component.azure-storage-blob.blobType

The blob type in order to initiate the appropriate settings for each blob type One of: [blockblob] [appendblob] [pageblob]

"blockblob"

false

MEDIUM

camel.component.azure-storage-blob.closeStream AfterRead

Close the stream after read or keep it open, default is true

true

false

MEDIUM

camel.component.azure-storage-blob.configuration

The component configurations

null

false

MEDIUM

camel.component.azure-storage-blob.credentials

StorageSharedKeyCredential can be injected to create the azure client, this holds the important authentication information

null

false

MEDIUM

camel.component.azure-storage-blob.dataCount

How many bytes to include in the range. Must be greater than or equal to 0 if specified.

null

false

MEDIUM

camel.component.azure-storage-blob.fileDir

The file directory where the downloaded blobs will be saved to, this can be used in both, producer and consumer

null

false

MEDIUM

camel.component.azure-storage-blob.maxResultsPer Page

null

false

MEDIUM

camel.component.azure-storage-blob.maxRetry Requests

Specifies the maximum number of additional HTTP Get requests that will be made while reading the data from a response body.

false

MEDIUM

camel.component.azure-storage-blob.prefix

Filters the results to return only blobs whose names begin with the specified prefix. May be null to return all blobs.

null

false

MEDIUM

camel.component.azure-storage-blob.serviceClient

Client to a storage account. This client does not hold any state about a particular storage account but is instead a convenient way of sending off appropriate requests to the resource on the service. It may also be used to construct URLs to blobs and containers. This client contains operations on a service account. Operations on a container are available on BlobContainerClient through BlobServiceClient#getBlobContainerClient(String), and operations on a blob are available on BlobClient through BlobContainerClient#getBlobClient(String).

null

false

MEDIUM

camel.component.azure-storage-blob.timeout

An optional timeout value beyond which a RuntimeException will be raised.

null

false

MEDIUM

camel.component.azure-storage-blob.bridgeError Handler

false

MEDIUM

camel.component.azure-storage-blob.basicProperty Binding

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

LOW

camel.component.azure-storage-blob.accessKey

Access key for the associated azure account name to be used for authentication with azure blob services

null

false

MEDIUM

The camel-azure-storage-blob sink connector has no converters out of the box.

The camel-azure-storage-blob sink connector has no transforms out of the box.

The camel-azure-storage-blob sink connector has no aggregation strategies out of the box.