camel-aws-kinesis-kafka-connector source configuration

When using camel-aws-kinesis-kafka-connector as source make sure to use the following Maven dependency to have support for the connector:

<dependency>
  <groupId>org.apache.camel.kafkaconnector</groupId>
  <artifactId>camel-aws-kinesis-kafka-connector</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel Kafka connector version -->
</dependency>

To use this Source connector in Kafka connect you’ll need to set the following connector.class

connector.class=org.apache.camel.kafkaconnector.awskinesis.CamelAwskinesisSourceConnector

The camel-aws-kinesis source connector supports 51 options, which are listed below.

Name Description Default Required Priority

camel.source.path.streamName

Name of the stream

null

true

HIGH

camel.source.endpoint.amazonKinesisClient

Amazon Kinesis client to use for all requests for this endpoint

null

false

MEDIUM

camel.source.endpoint.autoDiscoverClient

Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking

true

false

MEDIUM

camel.source.endpoint.proxyHost

To define a proxy host when instantiating the Kinesis client

null

false

MEDIUM

camel.source.endpoint.proxyPort

To define a proxy port when instantiating the Kinesis client

null

false

MEDIUM

camel.source.endpoint.proxyProtocol

To define a proxy protocol when instantiating the Kinesis client One of: [HTTP] [HTTPS]

"HTTPS"

false

MEDIUM

camel.source.endpoint.region

The region in which Kinesis client needs to work. When using this parameter, the configuration will expect the capitalized name of the region (for example AP_EAST_1)You’ll need to use the name Regions.EU_WEST_1.name()

null

false

MEDIUM

camel.source.endpoint.bridgeErrorHandler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

false

MEDIUM

camel.source.endpoint.iteratorType

Defines where in the Kinesis stream to start getting records One of: [AT_SEQUENCE_NUMBER] [AFTER_SEQUENCE_NUMBER] [TRIM_HORIZON] [LATEST] [AT_TIMESTAMP]

"TRIM_HORIZON"

false

MEDIUM

camel.source.endpoint.maxResultsPerRequest

Maximum number of records that will be fetched in each poll

1

false

MEDIUM

camel.source.endpoint.sendEmptyMessageWhenIdle

If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead.

false

false

MEDIUM

camel.source.endpoint.sequenceNumber

The sequence number to start polling from. Required if iteratorType is set to AFTER_SEQUENCE_NUMBER or AT_SEQUENCE_NUMBER

null

false

MEDIUM

camel.source.endpoint.shardClosed

Define what will be the behavior in case of shard closed. Possible value are ignore, silent and fail. In case of ignore a message will be logged and the consumer will restart from the beginning,in case of silent there will be no logging and the consumer will start from the beginning,in case of fail a ReachedClosedStateException will be raised One of: [ignore] [fail] [silent]

"ignore"

false

MEDIUM

camel.source.endpoint.shardId

Defines which shardId in the Kinesis stream to get records from

null

false

MEDIUM

camel.source.endpoint.exceptionHandler

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

null

false

MEDIUM

camel.source.endpoint.exchangePattern

Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut]

null

false

MEDIUM

camel.source.endpoint.pollStrategy

A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel.

null

false

MEDIUM

camel.source.endpoint.basicPropertyBinding

Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

false

MEDIUM

camel.source.endpoint.synchronous

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

false

MEDIUM

camel.source.endpoint.backoffErrorThreshold

The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in.

null

false

MEDIUM

camel.source.endpoint.backoffIdleThreshold

The number of subsequent idle polls that should happen before the backoffMultipler should kick-in.

null

false

MEDIUM

camel.source.endpoint.backoffMultiplier

To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured.

null

false

MEDIUM

camel.source.endpoint.delay

Milliseconds before the next poll.

500L

false

MEDIUM

camel.source.endpoint.greedy

If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages.

false

false

MEDIUM

camel.source.endpoint.initialDelay

Milliseconds before the first poll starts.

1000L

false

MEDIUM

camel.source.endpoint.repeatCount

Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever.

0L

false

MEDIUM

camel.source.endpoint.runLoggingLevel

The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]

"TRACE"

false

MEDIUM

camel.source.endpoint.scheduledExecutorService

Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool.

null

false

MEDIUM

camel.source.endpoint.scheduler

To use a cron scheduler from either camel-spring or camel-quartz component. Use value spring or quartz for built in scheduler

"none"

false

MEDIUM

camel.source.endpoint.schedulerProperties

To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler.

null

false

MEDIUM

camel.source.endpoint.startScheduler

Whether the scheduler should be auto started.

true

false

MEDIUM

camel.source.endpoint.timeUnit

Time unit for initialDelay and delay options. One of: [NANOSECONDS] [MICROSECONDS] [MILLISECONDS] [SECONDS] [MINUTES] [HOURS] [DAYS]

"MILLISECONDS"

false

MEDIUM

camel.source.endpoint.useFixedDelay

Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details.

true

false

MEDIUM

camel.source.endpoint.accessKey

Amazon AWS Access Key

null

false

MEDIUM

camel.source.endpoint.secretKey

Amazon AWS Secret Key

null

false

MEDIUM

camel.component.aws-kinesis.amazonKinesisClient

Amazon Kinesis client to use for all requests for this endpoint

null

false

MEDIUM

camel.component.aws-kinesis.autoDiscoverClient

Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking

true

false

MEDIUM

camel.component.aws-kinesis.configuration

The component configuration

null

false

MEDIUM

camel.component.aws-kinesis.proxyHost

To define a proxy host when instantiating the Kinesis client

null

false

MEDIUM

camel.component.aws-kinesis.proxyPort

To define a proxy port when instantiating the Kinesis client

null

false

MEDIUM

camel.component.aws-kinesis.proxyProtocol

To define a proxy protocol when instantiating the Kinesis client One of: [HTTP] [HTTPS]

"HTTPS"

false

MEDIUM

camel.component.aws-kinesis.region

The region in which Kinesis client needs to work. When using this parameter, the configuration will expect the capitalized name of the region (for example AP_EAST_1)You’ll need to use the name Regions.EU_WEST_1.name()

null

false

MEDIUM

camel.component.aws-kinesis.bridgeErrorHandler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

false

MEDIUM

camel.component.aws-kinesis.iteratorType

Defines where in the Kinesis stream to start getting records One of: [AT_SEQUENCE_NUMBER] [AFTER_SEQUENCE_NUMBER] [TRIM_HORIZON] [LATEST] [AT_TIMESTAMP]

"TRIM_HORIZON"

false

MEDIUM

camel.component.aws-kinesis.maxResultsPerRequest

Maximum number of records that will be fetched in each poll

1

false

MEDIUM

camel.component.aws-kinesis.sequenceNumber

The sequence number to start polling from. Required if iteratorType is set to AFTER_SEQUENCE_NUMBER or AT_SEQUENCE_NUMBER

null

false

MEDIUM

camel.component.aws-kinesis.shardClosed

Define what will be the behavior in case of shard closed. Possible value are ignore, silent and fail. In case of ignore a message will be logged and the consumer will restart from the beginning,in case of silent there will be no logging and the consumer will start from the beginning,in case of fail a ReachedClosedStateException will be raised One of: [ignore] [fail] [silent]

"ignore"

false

MEDIUM

camel.component.aws-kinesis.shardId

Defines which shardId in the Kinesis stream to get records from

null

false

MEDIUM

camel.component.aws-kinesis.basicPropertyBinding

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

false

LOW

camel.component.aws-kinesis.accessKey

Amazon AWS Access Key

null

false

MEDIUM

camel.component.aws-kinesis.secretKey

Amazon AWS Secret Key

null

false

MEDIUM

The camel-aws-kinesis sink connector has no converters out of the box.

The camel-aws-kinesis sink connector has no transforms out of the box.

The camel-aws-kinesis sink connector has no aggregation strategies out of the box.