camel-activemq-kafka-connector source configuration

When using camel-activemq-kafka-connector as source make sure to use the following Maven dependency to have support for the connector:

<dependency>
  <groupId>org.apache.camel.kafkaconnector</groupId>
  <artifactId>camel-activemq-kafka-connector</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel Kafka connector version -->
</dependency>

To use this Source connector in Kafka connect you’ll need to set the following connector.class

connector.class=org.apache.camel.kafkaconnector.activemq.CamelActivemqSourceConnector

The camel-activemq source connector supports 147 options, which are listed below.

Name	Description	Default	Required	Priority
camel.source.path.destinationType	The kind of destination to use One of: [queue] [topic] [temp-queue] [temp-topic]	"queue"	false	MEDIUM
camel.source.path.destinationName	Name of the queue or topic to use as destination	null	true	HIGH
camel.source.endpoint.clientId	Sets the JMS client ID to use. Note that this value, if specified, must be unique and can only be used by a single JMS connection instance. It is typically only required for durable topic subscriptions. If using Apache ActiveMQ you may prefer to use Virtual Topics instead.	null	false	MEDIUM
camel.source.endpoint.connectionFactory	The connection factory to be use. A connection factory must be configured either on the component or endpoint.	null	false	MEDIUM
camel.source.endpoint.disableReplyTo	Specifies whether Camel ignores the JMSReplyTo header in messages. If true, Camel does not send a reply back to the destination specified in the JMSReplyTo header. You can use this option if you want Camel to consume from a route and you do not want Camel to automatically send back a reply message because another component in your code handles the reply message. You can also use this option if you want to use Camel as a proxy between different message brokers and you want to route message from one system to another.	false	false	MEDIUM
camel.source.endpoint.durableSubscriptionName	The durable subscriber name for specifying durable topic subscriptions. The clientId option must be configured as well.	null	false	MEDIUM
camel.source.endpoint.jmsMessageType	Allows you to force the use of a specific javax.jms.Message implementation for sending JMS messages. Possible values are: Bytes, Map, Object, Stream, Text. By default, Camel would determine which JMS message type to use from the In body type. This option allows you to specify it. One of: [Bytes] [Map] [Object] [Stream] [Text]	null	false	MEDIUM
camel.source.endpoint.replyTo	Provides an explicit ReplyTo destination (overrides any incoming value of Message.getJMSReplyTo() in consumer).	null	false	MEDIUM
camel.source.endpoint.testConnectionOnStartup	Specifies whether to test the connection on startup. This ensures that when Camel starts that all the JMS consumers have a valid connection to the JMS broker. If a connection cannot be granted then Camel throws an exception on startup. This ensures that Camel is not started with failed connections. The JMS producers is tested as well.	false	false	MEDIUM
camel.source.endpoint.acknowledgementModeName	The JMS acknowledgement name, which is one of: SESSION_TRANSACTED, CLIENT_ACKNOWLEDGE, AUTO_ACKNOWLEDGE, DUPS_OK_ACKNOWLEDGE One of: [SESSION_TRANSACTED] [CLIENT_ACKNOWLEDGE] [AUTO_ACKNOWLEDGE] [DUPS_OK_ACKNOWLEDGE]	"AUTO_ACKNOWLEDGE"	false	MEDIUM
camel.source.endpoint.asyncConsumer	Whether the JmsConsumer processes the Exchange asynchronously. If enabled then the JmsConsumer may pickup the next message from the JMS queue, while the previous message is being processed asynchronously (by the Asynchronous Routing Engine). This means that messages may be processed not 100% strictly in order. If disabled (as default) then the Exchange is fully processed before the JmsConsumer will pickup the next message from the JMS queue. Note if transacted has been enabled, then asyncConsumer=true does not run asynchronously, as transaction must be executed synchronously (Camel 3.0 may support async transactions).	false	false	MEDIUM
camel.source.endpoint.autoStartup	Specifies whether the consumer container should auto-startup.	true	false	MEDIUM
camel.source.endpoint.cacheLevel	Sets the cache level by ID for the underlying JMS resources. See cacheLevelName option for more details.	null	false	MEDIUM
camel.source.endpoint.cacheLevelName	Sets the cache level by name for the underlying JMS resources. Possible values are: CACHE_AUTO, CACHE_CONNECTION, CACHE_CONSUMER, CACHE_NONE, and CACHE_SESSION. The default setting is CACHE_AUTO. See the Spring documentation and Transactions Cache Levels for more information. One of: [CACHE_AUTO] [CACHE_CONNECTION] [CACHE_CONSUMER] [CACHE_NONE] [CACHE_SESSION]	"CACHE_AUTO"	false	MEDIUM
camel.source.endpoint.concurrentConsumers	Specifies the default number of concurrent consumers when consuming from JMS (not for request/reply over JMS). See also the maxMessagesPerTask option to control dynamic scaling up/down of threads. When doing request/reply over JMS then the option replyToConcurrentConsumers is used to control number of concurrent consumers on the reply message listener.	1	false	MEDIUM
camel.source.endpoint.maxConcurrentConsumers	Specifies the maximum number of concurrent consumers when consuming from JMS (not for request/reply over JMS). See also the maxMessagesPerTask option to control dynamic scaling up/down of threads. When doing request/reply over JMS then the option replyToMaxConcurrentConsumers is used to control number of concurrent consumers on the reply message listener.	null	false	MEDIUM
camel.source.endpoint.replyToDeliveryPersistent	Specifies whether to use persistent delivery by default for replies.	true	false	MEDIUM
camel.source.endpoint.selector	Sets the JMS selector to use	null	false	MEDIUM
camel.source.endpoint.subscriptionDurable	Set whether to make the subscription durable. The durable subscription name to be used can be specified through the subscriptionName property. Default is false. Set this to true to register a durable subscription, typically in combination with a subscriptionName value (unless your message listener class name is good enough as subscription name). Only makes sense when listening to a topic (pub-sub domain), therefore this method switches the pubSubDomain flag as well.	false	false	MEDIUM
camel.source.endpoint.subscriptionName	Set the name of a subscription to create. To be applied in case of a topic (pub-sub domain) with a shared or durable subscription. The subscription name needs to be unique within this client’s JMS client id. Default is the class name of the specified message listener. Note: Only 1 concurrent consumer (which is the default of this message listener container) is allowed for each subscription, except for a shared subscription (which requires JMS 2.0).	null	false	MEDIUM
camel.source.endpoint.subscriptionShared	Set whether to make the subscription shared. The shared subscription name to be used can be specified through the subscriptionName property. Default is false. Set this to true to register a shared subscription, typically in combination with a subscriptionName value (unless your message listener class name is good enough as subscription name). Note that shared subscriptions may also be durable, so this flag can (and often will) be combined with subscriptionDurable as well. Only makes sense when listening to a topic (pub-sub domain), therefore this method switches the pubSubDomain flag as well. Requires a JMS 2.0 compatible message broker.	false	false	MEDIUM
camel.source.endpoint.acceptMessagesWhileStopping	Specifies whether the consumer accept messages while it is stopping. You may consider enabling this option, if you start and stop JMS routes at runtime, while there are still messages enqueued on the queue. If this option is false, and you stop the JMS route, then messages may be rejected, and the JMS broker would have to attempt redeliveries, which yet again may be rejected, and eventually the message may be moved at a dead letter queue on the JMS broker. To avoid this its recommended to enable this option.	false	false	MEDIUM
camel.source.endpoint.allowReplyManagerQuickStop	Whether the DefaultMessageListenerContainer used in the reply managers for request-reply messaging allow the DefaultMessageListenerContainer.runningAllowed flag to quick stop in case JmsConfiguration#isAcceptMessagesWhileStopping is enabled, and org.apache.camel.CamelContext is currently being stopped. This quick stop ability is enabled by default in the regular JMS consumers but to enable for reply managers you must enable this flag.	false	false	MEDIUM
camel.source.endpoint.consumerType	The consumer type to use, which can be one of: Simple, Default, or Custom. The consumer type determines which Spring JMS listener to use. Default will use org.springframework.jms.listener.DefaultMessageListenerContainer, Simple will use org.springframework.jms.listener.SimpleMessageListenerContainer. When Custom is specified, the MessageListenerContainerFactory defined by the messageListenerContainerFactory option will determine what org.springframework.jms.listener.AbstractMessageListenerContainer to use. One of: [Simple] [Default] [Custom]	"Default"	false	MEDIUM
camel.source.endpoint.defaultTaskExecutorType	Specifies what default TaskExecutor type to use in the DefaultMessageListenerContainer, for both consumer endpoints and the ReplyTo consumer of producer endpoints. Possible values: SimpleAsync (uses Spring’s SimpleAsyncTaskExecutor) or ThreadPool (uses Spring’s ThreadPoolTaskExecutor with optimal values - cached threadpool-like). If not set, it defaults to the previous behaviour, which uses a cached thread pool for consumer endpoints and SimpleAsync for reply consumers. The use of ThreadPool is recommended to reduce thread trash in elastic configurations with dynamically increasing and decreasing concurrent consumers. One of: [ThreadPool] [SimpleAsync]	null	false	MEDIUM
camel.source.endpoint.eagerLoadingOfProperties	Enables eager loading of JMS properties and payload as soon as a message is loaded which generally is inefficient as the JMS properties may not be required but sometimes can catch early any issues with the underlying JMS provider and the use of JMS properties. See also the option eagerPoisonBody.	false	false	MEDIUM
camel.source.endpoint.eagerPoisonBody	If eagerLoadingOfProperties is enabled and the JMS message payload (JMS body or JMS properties) is poison (cannot be read/mapped), then set this text as the message body instead so the message can be processed (the cause of the poison are already stored as exception on the Exchange). This can be turned off by setting eagerPoisonBody=false. See also the option eagerLoadingOfProperties.	"Poison JMS message due to ${exception.message}"	false	MEDIUM
camel.source.endpoint.exceptionHandler	To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.	null	false	MEDIUM
camel.source.endpoint.exchangePattern	Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut]	null	false	MEDIUM
camel.source.endpoint.exposeListenerSession	Specifies whether the listener session should be exposed when consuming messages.	false	false	MEDIUM
camel.source.endpoint.replyToSameDestination Allowed	Whether a JMS consumer is allowed to send a reply message to the same destination that the consumer is using to consume from. This prevents an endless loop by consuming and sending back the same message to itself.	false	false	MEDIUM
camel.source.endpoint.taskExecutor	Allows you to specify a custom task executor for consuming messages.	null	false	MEDIUM
camel.source.endpoint.allowSerializedHeaders	Controls whether or not to include serialized headers. Applies only when transferExchange is true. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level.	false	false	MEDIUM
camel.source.endpoint.artemisStreamingEnabled	Whether optimizing for Apache Artemis streaming mode.	true	false	MEDIUM
camel.source.endpoint.asyncStartListener	Whether to startup the JmsConsumer message listener asynchronously, when starting a route. For example if a JmsConsumer cannot get a connection to a remote JMS broker, then it may block while retrying and/or failover. This will cause Camel to block while starting routes. By setting this option to true, you will let routes startup, while the JmsConsumer connects to the JMS broker using a dedicated thread in asynchronous mode. If this option is used, then beware that if the connection could not be established, then an exception is logged at WARN level, and the consumer will not be able to receive messages; You can then restart the route to retry.	false	false	MEDIUM
camel.source.endpoint.asyncStopListener	Whether to stop the JmsConsumer message listener asynchronously, when stopping a route.	false	false	MEDIUM
camel.source.endpoint.basicPropertyBinding	Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	false	MEDIUM
camel.source.endpoint.destinationResolver	A pluggable org.springframework.jms.support.destination.DestinationResolver that allows you to use your own resolver (for example, to lookup the real destination in a JNDI registry).	null	false	MEDIUM
camel.source.endpoint.errorHandler	Specifies a org.springframework.util.ErrorHandler to be invoked in case of any uncaught exceptions thrown while processing a Message. By default these exceptions will be logged at the WARN level, if no errorHandler has been configured. You can configure logging level and whether stack traces should be logged using errorHandlerLoggingLevel and errorHandlerLogStackTrace options. This makes it much easier to configure, than having to code a custom errorHandler.	null	false	MEDIUM
camel.source.endpoint.exceptionListener	Specifies the JMS Exception Listener that is to be notified of any underlying JMS exceptions.	null	false	MEDIUM
camel.source.endpoint.headerFilterStrategy	To use a custom HeaderFilterStrategy to filter header to and from Camel message.	null	false	MEDIUM
camel.source.endpoint.idleConsumerLimit	Specify the limit for the number of consumers that are allowed to be idle at any given time.	1	false	MEDIUM
camel.source.endpoint.idleTaskExecutionLimit	Specifies the limit for idle executions of a receive task, not having received any message within its execution. If this limit is reached, the task will shut down and leave receiving to other executing tasks (in the case of dynamic scheduling; see the maxConcurrentConsumers setting). There is additional doc available from Spring.	1	false	MEDIUM
camel.source.endpoint.includeAllJMSXProperties	Whether to include all JMSXxxx properties when mapping from JMS to Camel Message. Setting this to true will include properties such as JMSXAppID, and JMSXUserID etc. Note: If you are using a custom headerFilterStrategy then this option does not apply.	false	false	MEDIUM
camel.source.endpoint.jmsKeyFormatStrategy	Pluggable strategy for encoding and decoding JMS keys so they can be compliant with the JMS specification. Camel provides two implementations out of the box: default and passthrough. The default strategy will safely marshal dots and hyphens (. and -). The passthrough strategy leaves the key as is. Can be used for JMS brokers which do not care whether JMS header keys contain illegal characters. You can provide your own implementation of the org.apache.camel.component.jms.JmsKeyFormatStrategy and refer to it using the # notation. One of: [default] [passthrough]	null	false	MEDIUM
camel.source.endpoint.mapJmsMessage	Specifies whether Camel should auto map the received JMS message to a suited payload type, such as javax.jms.TextMessage to a String etc.	true	false	MEDIUM
camel.source.endpoint.maxMessagesPerTask	The number of messages per task. -1 is unlimited. If you use a range for concurrent consumers (eg min max), then this option can be used to set a value to eg 100 to control how fast the consumers will shrink when less work is required.	-1	false	MEDIUM
camel.source.endpoint.messageConverter	To use a custom Spring org.springframework.jms.support.converter.MessageConverter so you can be in control how to map to/from a javax.jms.Message.	null	false	MEDIUM
camel.source.endpoint.messageCreatedStrategy	To use the given MessageCreatedStrategy which are invoked when Camel creates new instances of javax.jms.Message objects when Camel is sending a JMS message.	null	false	MEDIUM
camel.source.endpoint.messageIdEnabled	When sending, specifies whether message IDs should be added. This is just an hint to the JMS broker. If the JMS provider accepts this hint, these messages must have the message ID set to null; if the provider ignores the hint, the message ID must be set to its normal unique value.	true	false	MEDIUM
camel.source.endpoint.messageListenerContainer Factory	Registry ID of the MessageListenerContainerFactory used to determine what org.springframework.jms.listener.AbstractMessageListenerContainer to use to consume messages. Setting this will automatically set consumerType to Custom.	null	false	MEDIUM
camel.source.endpoint.messageTimestampEnabled	Specifies whether timestamps should be enabled by default on sending messages. This is just an hint to the JMS broker. If the JMS provider accepts this hint, these messages must have the timestamp set to zero; if the provider ignores the hint the timestamp must be set to its normal value.	true	false	MEDIUM
camel.source.endpoint.pubSubNoLocal	Specifies whether to inhibit the delivery of messages published by its own connection.	false	false	MEDIUM
camel.source.endpoint.receiveTimeout	The timeout for receiving messages (in milliseconds).	1000L	false	MEDIUM
camel.source.endpoint.recoveryInterval	Specifies the interval between recovery attempts, i.e. when a connection is being refreshed, in milliseconds. The default is 5000 ms, that is, 5 seconds.	5000L	false	MEDIUM
camel.source.endpoint.requestTimeoutChecker Interval	Configures how often Camel should check for timed out Exchanges when doing request/reply over JMS. By default Camel checks once per second. But if you must react faster when a timeout occurs, then you can lower this interval, to check more frequently. The timeout is determined by the option requestTimeout.	1000L	false	MEDIUM
camel.source.endpoint.synchronous	Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).	false	false	MEDIUM
camel.source.endpoint.transferException	If enabled and you are using Request Reply messaging (InOut) and an Exchange failed on the consumer side, then the caused Exception will be send back in response as a javax.jms.ObjectMessage. If the client is Camel, the returned Exception is rethrown. This allows you to use Camel JMS as a bridge in your routing - for example, using persistent queues to enable robust routing. Notice that if you also have transferExchange enabled, this option takes precedence. The caught exception is required to be serializable. The original Exception on the consumer side can be wrapped in an outer exception such as org.apache.camel.RuntimeCamelException when returned to the producer. Use this with caution as the data is using Java Object serialization and requires the received to be able to deserialize the data at Class level, which forces a strong coupling between the producers and consumer!	false	false	MEDIUM
camel.source.endpoint.transferExchange	You can transfer the exchange over the wire instead of just the body and headers. The following fields are transferred: In body, Out body, Fault body, In headers, Out headers, Fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level. You must enable this option on both the producer and consumer side, so Camel knows the payloads is an Exchange and not a regular payload. Use this with caution as the data is using Java Object serialization and requires the received to be able to deserialize the data at Class level, which forces a strong coupling between the producers and consumer having to use compatible Camel versions!	false	false	MEDIUM
camel.source.endpoint.useMessageIDAsCorrelationID	Specifies whether JMSMessageID should always be used as JMSCorrelationID for InOut messages.	false	false	MEDIUM
camel.source.endpoint.waitForProvisionCorrelation ToBeUpdatedCounter	Number of times to wait for provisional correlation id to be updated to the actual correlation id when doing request/reply over JMS and when the option useMessageIDAsCorrelationID is enabled.	50	false	MEDIUM
camel.source.endpoint.waitForProvisionCorrelation ToBeUpdatedThreadSleepingTime	Interval in millis to sleep each time while waiting for provisional correlation id to be updated.	100L	false	MEDIUM
camel.source.endpoint.errorHandlerLoggingLevel	Allows to configure the default errorHandler logging level for logging uncaught exceptions. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]	"WARN"	false	MEDIUM
camel.source.endpoint.errorHandlerLogStackTrace	Allows to control whether stacktraces should be logged or not, by the default errorHandler.	true	false	MEDIUM
camel.source.endpoint.password	Password to use with the ConnectionFactory. You can also configure username/password directly on the ConnectionFactory.	null	false	MEDIUM
camel.source.endpoint.username	Username to use with the ConnectionFactory. You can also configure username/password directly on the ConnectionFactory.	null	false	MEDIUM
camel.source.endpoint.transacted	Specifies whether to use transacted mode	false	false	MEDIUM
camel.source.endpoint.transactedInOut	Specifies whether InOut operations (request reply) default to using transacted mode If this flag is set to true, then Spring JmsTemplate will have sessionTransacted set to true, and the acknowledgeMode as transacted on the JmsTemplate used for InOut operations. Note from Spring JMS: that within a JTA transaction, the parameters passed to createQueue, createTopic methods are not taken into account. Depending on the Java EE transaction context, the container makes its own decisions on these values. Analogously, these parameters are not taken into account within a locally managed transaction either, since Spring JMS operates on an existing JMS Session in this case. Setting this flag to true will use a short local JMS transaction when running outside of a managed transaction, and a synchronized local JMS transaction in case of a managed transaction (other than an XA transaction) being present. This has the effect of a local JMS transaction being managed alongside the main transaction (which might be a native JDBC transaction), with the JMS transaction committing right after the main transaction.	false	false	MEDIUM
camel.source.endpoint.lazyCreateTransactionManager	If true, Camel will create a JmsTransactionManager, if there is no transactionManager injected when option transacted=true.	true	false	MEDIUM
camel.source.endpoint.transactionManager	The Spring transaction manager to use.	null	false	MEDIUM
camel.source.endpoint.transactionName	The name of the transaction to use.	null	false	MEDIUM
camel.source.endpoint.transactionTimeout	The timeout value of the transaction (in seconds), if using transacted mode.	-1	false	MEDIUM
camel.component.activemq.brokerURL	Sets the broker URL to use to connect to ActiveMQ. If none configured then localhost:61616 is used by default (however can be overridden by configuration from environment variables)	null	false	MEDIUM
camel.component.activemq.clientId	Sets the JMS client ID to use. Note that this value, if specified, must be unique and can only be used by a single JMS connection instance. It is typically only required for durable topic subscriptions. If using Apache ActiveMQ you may prefer to use Virtual Topics instead.	null	false	MEDIUM
camel.component.activemq.connectionFactory	The connection factory to be use. A connection factory must be configured either on the component or endpoint.	null	false	MEDIUM
camel.component.activemq.disableReplyTo	Specifies whether Camel ignores the JMSReplyTo header in messages. If true, Camel does not send a reply back to the destination specified in the JMSReplyTo header. You can use this option if you want Camel to consume from a route and you do not want Camel to automatically send back a reply message because another component in your code handles the reply message. You can also use this option if you want to use Camel as a proxy between different message brokers and you want to route message from one system to another.	false	false	MEDIUM
camel.component.activemq.durableSubscriptionName	The durable subscriber name for specifying durable topic subscriptions. The clientId option must be configured as well.	null	false	MEDIUM
camel.component.activemq.jmsMessageType	Allows you to force the use of a specific javax.jms.Message implementation for sending JMS messages. Possible values are: Bytes, Map, Object, Stream, Text. By default, Camel would determine which JMS message type to use from the In body type. This option allows you to specify it. One of: [Bytes] [Map] [Object] [Stream] [Text]	null	false	MEDIUM
camel.component.activemq.replyTo	Provides an explicit ReplyTo destination (overrides any incoming value of Message.getJMSReplyTo() in consumer).	null	false	MEDIUM
camel.component.activemq.testConnectionOnStartup	Specifies whether to test the connection on startup. This ensures that when Camel starts that all the JMS consumers have a valid connection to the JMS broker. If a connection cannot be granted then Camel throws an exception on startup. This ensures that Camel is not started with failed connections. The JMS producers is tested as well.	false	false	MEDIUM
camel.component.activemq.usePooledConnection	Enables or disables whether a PooledConnectionFactory will be used so that when messages are sent to ActiveMQ from outside of a message consuming thread, pooling will be used rather than the default with the Spring JmsTemplate which will create a new connection, session, producer for each message then close them all down again. The default value is true.	true	false	MEDIUM
camel.component.activemq.useSingleConnection	Enables or disables whether a Spring SingleConnectionFactory will be used so that when messages are sent to ActiveMQ from outside of a message consuming thread, pooling will be used rather than the default with the Spring JmsTemplate which will create a new connection, session, producer for each message then close them all down again. The default value is false and a pooled connection is used by default.	false	false	MEDIUM
camel.component.activemq.acknowledgementModeName	The JMS acknowledgement name, which is one of: SESSION_TRANSACTED, CLIENT_ACKNOWLEDGE, AUTO_ACKNOWLEDGE, DUPS_OK_ACKNOWLEDGE One of: [SESSION_TRANSACTED] [CLIENT_ACKNOWLEDGE] [AUTO_ACKNOWLEDGE] [DUPS_OK_ACKNOWLEDGE]	"AUTO_ACKNOWLEDGE"	false	MEDIUM
camel.component.activemq.asyncConsumer	Whether the JmsConsumer processes the Exchange asynchronously. If enabled then the JmsConsumer may pickup the next message from the JMS queue, while the previous message is being processed asynchronously (by the Asynchronous Routing Engine). This means that messages may be processed not 100% strictly in order. If disabled (as default) then the Exchange is fully processed before the JmsConsumer will pickup the next message from the JMS queue. Note if transacted has been enabled, then asyncConsumer=true does not run asynchronously, as transaction must be executed synchronously (Camel 3.0 may support async transactions).	false	false	MEDIUM
camel.component.activemq.autoStartup	Specifies whether the consumer container should auto-startup.	true	false	MEDIUM
camel.component.activemq.cacheLevel	Sets the cache level by ID for the underlying JMS resources. See cacheLevelName option for more details.	null	false	MEDIUM
camel.component.activemq.cacheLevelName	Sets the cache level by name for the underlying JMS resources. Possible values are: CACHE_AUTO, CACHE_CONNECTION, CACHE_CONSUMER, CACHE_NONE, and CACHE_SESSION. The default setting is CACHE_AUTO. See the Spring documentation and Transactions Cache Levels for more information. One of: [CACHE_AUTO] [CACHE_CONNECTION] [CACHE_CONSUMER] [CACHE_NONE] [CACHE_SESSION]	"CACHE_AUTO"	false	MEDIUM
camel.component.activemq.concurrentConsumers	Specifies the default number of concurrent consumers when consuming from JMS (not for request/reply over JMS). See also the maxMessagesPerTask option to control dynamic scaling up/down of threads. When doing request/reply over JMS then the option replyToConcurrentConsumers is used to control number of concurrent consumers on the reply message listener.	1	false	MEDIUM
camel.component.activemq.maxConcurrentConsumers	Specifies the maximum number of concurrent consumers when consuming from JMS (not for request/reply over JMS). See also the maxMessagesPerTask option to control dynamic scaling up/down of threads. When doing request/reply over JMS then the option replyToMaxConcurrentConsumers is used to control number of concurrent consumers on the reply message listener.	null	false	MEDIUM
camel.component.activemq.replyToDeliveryPersistent	Specifies whether to use persistent delivery by default for replies.	true	false	MEDIUM
camel.component.activemq.selector	Sets the JMS selector to use	null	false	MEDIUM
camel.component.activemq.subscriptionDurable	Set whether to make the subscription durable. The durable subscription name to be used can be specified through the subscriptionName property. Default is false. Set this to true to register a durable subscription, typically in combination with a subscriptionName value (unless your message listener class name is good enough as subscription name). Only makes sense when listening to a topic (pub-sub domain), therefore this method switches the pubSubDomain flag as well.	false	false	MEDIUM
camel.component.activemq.subscriptionName	Set the name of a subscription to create. To be applied in case of a topic (pub-sub domain) with a shared or durable subscription. The subscription name needs to be unique within this client’s JMS client id. Default is the class name of the specified message listener. Note: Only 1 concurrent consumer (which is the default of this message listener container) is allowed for each subscription, except for a shared subscription (which requires JMS 2.0).	null	false	MEDIUM
camel.component.activemq.subscriptionShared	Set whether to make the subscription shared. The shared subscription name to be used can be specified through the subscriptionName property. Default is false. Set this to true to register a shared subscription, typically in combination with a subscriptionName value (unless your message listener class name is good enough as subscription name). Note that shared subscriptions may also be durable, so this flag can (and often will) be combined with subscriptionDurable as well. Only makes sense when listening to a topic (pub-sub domain), therefore this method switches the pubSubDomain flag as well. Requires a JMS 2.0 compatible message broker.	false	false	MEDIUM
camel.component.activemq.acceptMessagesWhile Stopping	Specifies whether the consumer accept messages while it is stopping. You may consider enabling this option, if you start and stop JMS routes at runtime, while there are still messages enqueued on the queue. If this option is false, and you stop the JMS route, then messages may be rejected, and the JMS broker would have to attempt redeliveries, which yet again may be rejected, and eventually the message may be moved at a dead letter queue on the JMS broker. To avoid this its recommended to enable this option.	false	false	MEDIUM
camel.component.activemq.allowReplyManagerQuick Stop	Whether the DefaultMessageListenerContainer used in the reply managers for request-reply messaging allow the DefaultMessageListenerContainer.runningAllowed flag to quick stop in case JmsConfiguration#isAcceptMessagesWhileStopping is enabled, and org.apache.camel.CamelContext is currently being stopped. This quick stop ability is enabled by default in the regular JMS consumers but to enable for reply managers you must enable this flag.	false	false	MEDIUM
camel.component.activemq.consumerType	The consumer type to use, which can be one of: Simple, Default, or Custom. The consumer type determines which Spring JMS listener to use. Default will use org.springframework.jms.listener.DefaultMessageListenerContainer, Simple will use org.springframework.jms.listener.SimpleMessageListenerContainer. When Custom is specified, the MessageListenerContainerFactory defined by the messageListenerContainerFactory option will determine what org.springframework.jms.listener.AbstractMessageListenerContainer to use. One of: [Simple] [Default] [Custom]	"Default"	false	MEDIUM
camel.component.activemq.defaultTaskExecutorType	Specifies what default TaskExecutor type to use in the DefaultMessageListenerContainer, for both consumer endpoints and the ReplyTo consumer of producer endpoints. Possible values: SimpleAsync (uses Spring’s SimpleAsyncTaskExecutor) or ThreadPool (uses Spring’s ThreadPoolTaskExecutor with optimal values - cached threadpool-like). If not set, it defaults to the previous behaviour, which uses a cached thread pool for consumer endpoints and SimpleAsync for reply consumers. The use of ThreadPool is recommended to reduce thread trash in elastic configurations with dynamically increasing and decreasing concurrent consumers. One of: [ThreadPool] [SimpleAsync]	null	false	MEDIUM
camel.component.activemq.eagerLoadingOfProperties	Enables eager loading of JMS properties and payload as soon as a message is loaded which generally is inefficient as the JMS properties may not be required but sometimes can catch early any issues with the underlying JMS provider and the use of JMS properties. See also the option eagerPoisonBody.	false	false	MEDIUM
camel.component.activemq.eagerPoisonBody	If eagerLoadingOfProperties is enabled and the JMS message payload (JMS body or JMS properties) is poison (cannot be read/mapped), then set this text as the message body instead so the message can be processed (the cause of the poison are already stored as exception on the Exchange). This can be turned off by setting eagerPoisonBody=false. See also the option eagerLoadingOfProperties.	"Poison JMS message due to ${exception.message}"	false	MEDIUM
camel.component.activemq.exposeListenerSession	Specifies whether the listener session should be exposed when consuming messages.	false	false	MEDIUM
camel.component.activemq.replyToSameDestination Allowed	Whether a JMS consumer is allowed to send a reply message to the same destination that the consumer is using to consume from. This prevents an endless loop by consuming and sending back the same message to itself.	false	false	MEDIUM
camel.component.activemq.taskExecutor	Allows you to specify a custom task executor for consuming messages.	null	false	MEDIUM
camel.component.activemq.allowAutoWiredConnection Factory	Whether to auto-discover ConnectionFactory from the registry, if no connection factory has been configured. If only one instance of ConnectionFactory is found then it will be used. This is enabled by default.	true	false	MEDIUM
camel.component.activemq.allowAutoWiredDestination Resolver	Whether to auto-discover DestinationResolver from the registry, if no destination resolver has been configured. If only one instance of DestinationResolver is found then it will be used. This is enabled by default.	true	false	MEDIUM
camel.component.activemq.allowSerializedHeaders	Controls whether or not to include serialized headers. Applies only when transferExchange is true. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level.	false	false	MEDIUM
camel.component.activemq.artemisStreamingEnabled	Whether optimizing for Apache Artemis streaming mode.	true	false	MEDIUM
camel.component.activemq.asyncStartListener	Whether to startup the JmsConsumer message listener asynchronously, when starting a route. For example if a JmsConsumer cannot get a connection to a remote JMS broker, then it may block while retrying and/or failover. This will cause Camel to block while starting routes. By setting this option to true, you will let routes startup, while the JmsConsumer connects to the JMS broker using a dedicated thread in asynchronous mode. If this option is used, then beware that if the connection could not be established, then an exception is logged at WARN level, and the consumer will not be able to receive messages; You can then restart the route to retry.	false	false	MEDIUM
camel.component.activemq.asyncStopListener	Whether to stop the JmsConsumer message listener asynchronously, when stopping a route.	false	false	MEDIUM
camel.component.activemq.basicPropertyBinding	Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	false	LOW
camel.component.activemq.configuration	To use a shared JMS configuration	null	false	MEDIUM
camel.component.activemq.destinationResolver	A pluggable org.springframework.jms.support.destination.DestinationResolver that allows you to use your own resolver (for example, to lookup the real destination in a JNDI registry).	null	false	MEDIUM
camel.component.activemq.errorHandler	Specifies a org.springframework.util.ErrorHandler to be invoked in case of any uncaught exceptions thrown while processing a Message. By default these exceptions will be logged at the WARN level, if no errorHandler has been configured. You can configure logging level and whether stack traces should be logged using errorHandlerLoggingLevel and errorHandlerLogStackTrace options. This makes it much easier to configure, than having to code a custom errorHandler.	null	false	MEDIUM
camel.component.activemq.exceptionListener	Specifies the JMS Exception Listener that is to be notified of any underlying JMS exceptions.	null	false	MEDIUM
camel.component.activemq.idleConsumerLimit	Specify the limit for the number of consumers that are allowed to be idle at any given time.	1	false	MEDIUM
camel.component.activemq.idleTaskExecutionLimit	Specifies the limit for idle executions of a receive task, not having received any message within its execution. If this limit is reached, the task will shut down and leave receiving to other executing tasks (in the case of dynamic scheduling; see the maxConcurrentConsumers setting). There is additional doc available from Spring.	1	false	MEDIUM
camel.component.activemq.includeAllJMSXProperties	Whether to include all JMSXxxx properties when mapping from JMS to Camel Message. Setting this to true will include properties such as JMSXAppID, and JMSXUserID etc. Note: If you are using a custom headerFilterStrategy then this option does not apply.	false	false	MEDIUM
camel.component.activemq.jmsKeyFormatStrategy	Pluggable strategy for encoding and decoding JMS keys so they can be compliant with the JMS specification. Camel provides two implementations out of the box: default and passthrough. The default strategy will safely marshal dots and hyphens (. and -). The passthrough strategy leaves the key as is. Can be used for JMS brokers which do not care whether JMS header keys contain illegal characters. You can provide your own implementation of the org.apache.camel.component.jms.JmsKeyFormatStrategy and refer to it using the # notation. One of: [default] [passthrough]	null	false	MEDIUM
camel.component.activemq.mapJmsMessage	Specifies whether Camel should auto map the received JMS message to a suited payload type, such as javax.jms.TextMessage to a String etc.	true	false	MEDIUM
camel.component.activemq.maxMessagesPerTask	The number of messages per task. -1 is unlimited. If you use a range for concurrent consumers (eg min max), then this option can be used to set a value to eg 100 to control how fast the consumers will shrink when less work is required.	-1	false	MEDIUM
camel.component.activemq.messageConverter	To use a custom Spring org.springframework.jms.support.converter.MessageConverter so you can be in control how to map to/from a javax.jms.Message.	null	false	MEDIUM
camel.component.activemq.messageCreatedStrategy	To use the given MessageCreatedStrategy which are invoked when Camel creates new instances of javax.jms.Message objects when Camel is sending a JMS message.	null	false	MEDIUM
camel.component.activemq.messageIdEnabled	When sending, specifies whether message IDs should be added. This is just an hint to the JMS broker. If the JMS provider accepts this hint, these messages must have the message ID set to null; if the provider ignores the hint, the message ID must be set to its normal unique value.	true	false	MEDIUM
camel.component.activemq.messageListenerContainer Factory	Registry ID of the MessageListenerContainerFactory used to determine what org.springframework.jms.listener.AbstractMessageListenerContainer to use to consume messages. Setting this will automatically set consumerType to Custom.	null	false	MEDIUM
camel.component.activemq.messageTimestampEnabled	Specifies whether timestamps should be enabled by default on sending messages. This is just an hint to the JMS broker. If the JMS provider accepts this hint, these messages must have the timestamp set to zero; if the provider ignores the hint the timestamp must be set to its normal value.	true	false	MEDIUM
camel.component.activemq.pubSubNoLocal	Specifies whether to inhibit the delivery of messages published by its own connection.	false	false	MEDIUM
camel.component.activemq.queueBrowseStrategy	To use a custom QueueBrowseStrategy when browsing queues	null	false	MEDIUM
camel.component.activemq.receiveTimeout	The timeout for receiving messages (in milliseconds).	1000L	false	MEDIUM
camel.component.activemq.recoveryInterval	Specifies the interval between recovery attempts, i.e. when a connection is being refreshed, in milliseconds. The default is 5000 ms, that is, 5 seconds.	5000L	false	MEDIUM
camel.component.activemq.requestTimeoutChecker Interval	Configures how often Camel should check for timed out Exchanges when doing request/reply over JMS. By default Camel checks once per second. But if you must react faster when a timeout occurs, then you can lower this interval, to check more frequently. The timeout is determined by the option requestTimeout.	1000L	false	MEDIUM
camel.component.activemq.transferException	If enabled and you are using Request Reply messaging (InOut) and an Exchange failed on the consumer side, then the caused Exception will be send back in response as a javax.jms.ObjectMessage. If the client is Camel, the returned Exception is rethrown. This allows you to use Camel JMS as a bridge in your routing - for example, using persistent queues to enable robust routing. Notice that if you also have transferExchange enabled, this option takes precedence. The caught exception is required to be serializable. The original Exception on the consumer side can be wrapped in an outer exception such as org.apache.camel.RuntimeCamelException when returned to the producer. Use this with caution as the data is using Java Object serialization and requires the received to be able to deserialize the data at Class level, which forces a strong coupling between the producers and consumer!	false	false	MEDIUM
camel.component.activemq.transferExchange	You can transfer the exchange over the wire instead of just the body and headers. The following fields are transferred: In body, Out body, Fault body, In headers, Out headers, Fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level. You must enable this option on both the producer and consumer side, so Camel knows the payloads is an Exchange and not a regular payload. Use this with caution as the data is using Java Object serialization and requires the received to be able to deserialize the data at Class level, which forces a strong coupling between the producers and consumer having to use compatible Camel versions!	false	false	MEDIUM
camel.component.activemq.trustAllPackages	Define if all Java packages are trusted or not (for Java object JMS message types). Notice its not recommended practice to send Java serialized objects over network. Setting this to true can expose security risks, so use this with care.	false	false	MEDIUM
camel.component.activemq.useMessageIDAs CorrelationID	Specifies whether JMSMessageID should always be used as JMSCorrelationID for InOut messages.	false	false	MEDIUM
camel.component.activemq.waitForProvision CorrelationToBeUpdatedCounter	Number of times to wait for provisional correlation id to be updated to the actual correlation id when doing request/reply over JMS and when the option useMessageIDAsCorrelationID is enabled.	50	false	MEDIUM
camel.component.activemq.waitForProvision CorrelationToBeUpdatedThreadSleepingTime	Interval in millis to sleep each time while waiting for provisional correlation id to be updated.	100L	false	MEDIUM
camel.component.activemq.headerFilterStrategy	To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter header to and from Camel message.	null	false	MEDIUM
camel.component.activemq.errorHandlerLoggingLevel	Allows to configure the default errorHandler logging level for logging uncaught exceptions. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]	"WARN"	false	MEDIUM
camel.component.activemq.errorHandlerLogStackTrace	Allows to control whether stacktraces should be logged or not, by the default errorHandler.	true	false	MEDIUM
camel.component.activemq.password	Password to use with the ConnectionFactory. You can also configure username/password directly on the ConnectionFactory.	null	false	MEDIUM
camel.component.activemq.username	Username to use with the ConnectionFactory. You can also configure username/password directly on the ConnectionFactory.	null	false	MEDIUM
camel.component.activemq.transacted	Specifies whether to use transacted mode	false	false	MEDIUM
camel.component.activemq.transactedInOut	Specifies whether InOut operations (request reply) default to using transacted mode If this flag is set to true, then Spring JmsTemplate will have sessionTransacted set to true, and the acknowledgeMode as transacted on the JmsTemplate used for InOut operations. Note from Spring JMS: that within a JTA transaction, the parameters passed to createQueue, createTopic methods are not taken into account. Depending on the Java EE transaction context, the container makes its own decisions on these values. Analogously, these parameters are not taken into account within a locally managed transaction either, since Spring JMS operates on an existing JMS Session in this case. Setting this flag to true will use a short local JMS transaction when running outside of a managed transaction, and a synchronized local JMS transaction in case of a managed transaction (other than an XA transaction) being present. This has the effect of a local JMS transaction being managed alongside the main transaction (which might be a native JDBC transaction), with the JMS transaction committing right after the main transaction.	false	false	MEDIUM
camel.component.activemq.lazyCreateTransaction Manager	If true, Camel will create a JmsTransactionManager, if there is no transactionManager injected when option transacted=true.	true	false	MEDIUM
camel.component.activemq.transactionManager	The Spring transaction manager to use.	null	false	MEDIUM
camel.component.activemq.transactionName	The name of the transaction to use.	null	false	MEDIUM
camel.component.activemq.transactionTimeout	The timeout value of the transaction (in seconds), if using transacted mode.	-1	false	MEDIUM

Name

Description

Default

Required

Priority

camel.source.path.destinationType

The kind of destination to use One of: [queue] [topic] [temp-queue] [temp-topic]

"queue"

false

MEDIUM

camel.source.path.destinationName

Name of the queue or topic to use as destination

null

true

HIGH

camel.source.endpoint.clientId

Sets the JMS client ID to use. Note that this value, if specified, must be unique and can only be used by a single JMS connection instance. It is typically only required for durable topic subscriptions. If using Apache ActiveMQ you may prefer to use Virtual Topics instead.

null

false

MEDIUM

camel.source.endpoint.connectionFactory

The connection factory to be use. A connection factory must be configured either on the component or endpoint.

null

false

MEDIUM

camel.source.endpoint.disableReplyTo

Specifies whether Camel ignores the JMSReplyTo header in messages. If true, Camel does not send a reply back to the destination specified in the JMSReplyTo header. You can use this option if you want Camel to consume from a route and you do not want Camel to automatically send back a reply message because another component in your code handles the reply message. You can also use this option if you want to use Camel as a proxy between different message brokers and you want to route message from one system to another.

false

MEDIUM

camel.source.endpoint.durableSubscriptionName

The durable subscriber name for specifying durable topic subscriptions. The clientId option must be configured as well.

null

false

MEDIUM

camel.source.endpoint.jmsMessageType

Allows you to force the use of a specific javax.jms.Message implementation for sending JMS messages. Possible values are: Bytes, Map, Object, Stream, Text. By default, Camel would determine which JMS message type to use from the In body type. This option allows you to specify it. One of: [Bytes] [Map] [Object] [Stream] [Text]

null

false

MEDIUM

camel.source.endpoint.replyTo

Provides an explicit ReplyTo destination (overrides any incoming value of Message.getJMSReplyTo() in consumer).

null

false

MEDIUM

camel.source.endpoint.testConnectionOnStartup

Specifies whether to test the connection on startup. This ensures that when Camel starts that all the JMS consumers have a valid connection to the JMS broker. If a connection cannot be granted then Camel throws an exception on startup. This ensures that Camel is not started with failed connections. The JMS producers is tested as well.

false

MEDIUM

camel.source.endpoint.acknowledgementModeName

The JMS acknowledgement name, which is one of: SESSION_TRANSACTED, CLIENT_ACKNOWLEDGE, AUTO_ACKNOWLEDGE, DUPS_OK_ACKNOWLEDGE One of: [SESSION_TRANSACTED] [CLIENT_ACKNOWLEDGE] [AUTO_ACKNOWLEDGE] [DUPS_OK_ACKNOWLEDGE]

"AUTO_ACKNOWLEDGE"

false

MEDIUM

camel.source.endpoint.asyncConsumer

Whether the JmsConsumer processes the Exchange asynchronously. If enabled then the JmsConsumer may pickup the next message from the JMS queue, while the previous message is being processed asynchronously (by the Asynchronous Routing Engine). This means that messages may be processed not 100% strictly in order. If disabled (as default) then the Exchange is fully processed before the JmsConsumer will pickup the next message from the JMS queue. Note if transacted has been enabled, then asyncConsumer=true does not run asynchronously, as transaction must be executed synchronously (Camel 3.0 may support async transactions).

false

MEDIUM

camel.source.endpoint.autoStartup

Specifies whether the consumer container should auto-startup.

true

false

MEDIUM

camel.source.endpoint.cacheLevel

Sets the cache level by ID for the underlying JMS resources. See cacheLevelName option for more details.

null

false

MEDIUM

camel.source.endpoint.cacheLevelName

Sets the cache level by name for the underlying JMS resources. Possible values are: CACHE_AUTO, CACHE_CONNECTION, CACHE_CONSUMER, CACHE_NONE, and CACHE_SESSION. The default setting is CACHE_AUTO. See the Spring documentation and Transactions Cache Levels for more information. One of: [CACHE_AUTO] [CACHE_CONNECTION] [CACHE_CONSUMER] [CACHE_NONE] [CACHE_SESSION]

"CACHE_AUTO"

false

MEDIUM

camel.source.endpoint.concurrentConsumers

Specifies the default number of concurrent consumers when consuming from JMS (not for request/reply over JMS). See also the maxMessagesPerTask option to control dynamic scaling up/down of threads. When doing request/reply over JMS then the option replyToConcurrentConsumers is used to control number of concurrent consumers on the reply message listener.

false

MEDIUM

camel.source.endpoint.maxConcurrentConsumers

Specifies the maximum number of concurrent consumers when consuming from JMS (not for request/reply over JMS). See also the maxMessagesPerTask option to control dynamic scaling up/down of threads. When doing request/reply over JMS then the option replyToMaxConcurrentConsumers is used to control number of concurrent consumers on the reply message listener.

null

false

MEDIUM

camel.source.endpoint.replyToDeliveryPersistent

Specifies whether to use persistent delivery by default for replies.

true

false

MEDIUM

camel.source.endpoint.selector

Sets the JMS selector to use

null

false

MEDIUM

camel.source.endpoint.subscriptionDurable

Set whether to make the subscription durable. The durable subscription name to be used can be specified through the subscriptionName property. Default is false. Set this to true to register a durable subscription, typically in combination with a subscriptionName value (unless your message listener class name is good enough as subscription name). Only makes sense when listening to a topic (pub-sub domain), therefore this method switches the pubSubDomain flag as well.

false

MEDIUM

camel.source.endpoint.subscriptionName

Set the name of a subscription to create. To be applied in case of a topic (pub-sub domain) with a shared or durable subscription. The subscription name needs to be unique within this client’s JMS client id. Default is the class name of the specified message listener. Note: Only 1 concurrent consumer (which is the default of this message listener container) is allowed for each subscription, except for a shared subscription (which requires JMS 2.0).

null

false

MEDIUM

camel.source.endpoint.subscriptionShared

Set whether to make the subscription shared. The shared subscription name to be used can be specified through the subscriptionName property. Default is false. Set this to true to register a shared subscription, typically in combination with a subscriptionName value (unless your message listener class name is good enough as subscription name). Note that shared subscriptions may also be durable, so this flag can (and often will) be combined with subscriptionDurable as well. Only makes sense when listening to a topic (pub-sub domain), therefore this method switches the pubSubDomain flag as well. Requires a JMS 2.0 compatible message broker.

false

MEDIUM

camel.source.endpoint.acceptMessagesWhileStopping

Specifies whether the consumer accept messages while it is stopping. You may consider enabling this option, if you start and stop JMS routes at runtime, while there are still messages enqueued on the queue. If this option is false, and you stop the JMS route, then messages may be rejected, and the JMS broker would have to attempt redeliveries, which yet again may be rejected, and eventually the message may be moved at a dead letter queue on the JMS broker. To avoid this its recommended to enable this option.

false

MEDIUM

camel.source.endpoint.allowReplyManagerQuickStop

Whether the DefaultMessageListenerContainer used in the reply managers for request-reply messaging allow the DefaultMessageListenerContainer.runningAllowed flag to quick stop in case JmsConfiguration#isAcceptMessagesWhileStopping is enabled, and org.apache.camel.CamelContext is currently being stopped. This quick stop ability is enabled by default in the regular JMS consumers but to enable for reply managers you must enable this flag.

false

MEDIUM

camel.source.endpoint.consumerType

The consumer type to use, which can be one of: Simple, Default, or Custom. The consumer type determines which Spring JMS listener to use. Default will use org.springframework.jms.listener.DefaultMessageListenerContainer, Simple will use org.springframework.jms.listener.SimpleMessageListenerContainer. When Custom is specified, the MessageListenerContainerFactory defined by the messageListenerContainerFactory option will determine what org.springframework.jms.listener.AbstractMessageListenerContainer to use. One of: [Simple] [Default] [Custom]

"Default"

false

MEDIUM

camel.source.endpoint.defaultTaskExecutorType

Specifies what default TaskExecutor type to use in the DefaultMessageListenerContainer, for both consumer endpoints and the ReplyTo consumer of producer endpoints. Possible values: SimpleAsync (uses Spring’s SimpleAsyncTaskExecutor) or ThreadPool (uses Spring’s ThreadPoolTaskExecutor with optimal values - cached threadpool-like). If not set, it defaults to the previous behaviour, which uses a cached thread pool for consumer endpoints and SimpleAsync for reply consumers. The use of ThreadPool is recommended to reduce thread trash in elastic configurations with dynamically increasing and decreasing concurrent consumers. One of: [ThreadPool] [SimpleAsync]

null

false

MEDIUM

camel.source.endpoint.eagerLoadingOfProperties

Enables eager loading of JMS properties and payload as soon as a message is loaded which generally is inefficient as the JMS properties may not be required but sometimes can catch early any issues with the underlying JMS provider and the use of JMS properties. See also the option eagerPoisonBody.

false

MEDIUM

camel.source.endpoint.eagerPoisonBody

If eagerLoadingOfProperties is enabled and the JMS message payload (JMS body or JMS properties) is poison (cannot be read/mapped), then set this text as the message body instead so the message can be processed (the cause of the poison are already stored as exception on the Exchange). This can be turned off by setting eagerPoisonBody=false. See also the option eagerLoadingOfProperties.

"Poison JMS message due to ${exception.message}"

false

MEDIUM

camel.source.endpoint.exceptionHandler

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

null

false

MEDIUM

camel.source.endpoint.exchangePattern

Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut]

null

false

MEDIUM

camel.source.endpoint.exposeListenerSession

Specifies whether the listener session should be exposed when consuming messages.

false

MEDIUM

camel.source.endpoint.replyToSameDestination Allowed

Whether a JMS consumer is allowed to send a reply message to the same destination that the consumer is using to consume from. This prevents an endless loop by consuming and sending back the same message to itself.

false

MEDIUM

camel.source.endpoint.taskExecutor

Allows you to specify a custom task executor for consuming messages.

null

false

MEDIUM

camel.source.endpoint.allowSerializedHeaders

Controls whether or not to include serialized headers. Applies only when transferExchange is true. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level.

false

MEDIUM

camel.source.endpoint.artemisStreamingEnabled

Whether optimizing for Apache Artemis streaming mode.

true

false

MEDIUM

camel.source.endpoint.asyncStartListener

Whether to startup the JmsConsumer message listener asynchronously, when starting a route. For example if a JmsConsumer cannot get a connection to a remote JMS broker, then it may block while retrying and/or failover. This will cause Camel to block while starting routes. By setting this option to true, you will let routes startup, while the JmsConsumer connects to the JMS broker using a dedicated thread in asynchronous mode. If this option is used, then beware that if the connection could not be established, then an exception is logged at WARN level, and the consumer will not be able to receive messages; You can then restart the route to retry.

false

MEDIUM

camel.source.endpoint.asyncStopListener

Whether to stop the JmsConsumer message listener asynchronously, when stopping a route.

false

MEDIUM

camel.source.endpoint.basicPropertyBinding

Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.source.endpoint.destinationResolver

A pluggable org.springframework.jms.support.destination.DestinationResolver that allows you to use your own resolver (for example, to lookup the real destination in a JNDI registry).

null

false

MEDIUM

camel.source.endpoint.errorHandler

Specifies a org.springframework.util.ErrorHandler to be invoked in case of any uncaught exceptions thrown while processing a Message. By default these exceptions will be logged at the WARN level, if no errorHandler has been configured. You can configure logging level and whether stack traces should be logged using errorHandlerLoggingLevel and errorHandlerLogStackTrace options. This makes it much easier to configure, than having to code a custom errorHandler.

null

false

MEDIUM

camel.source.endpoint.exceptionListener

Specifies the JMS Exception Listener that is to be notified of any underlying JMS exceptions.

null

false

MEDIUM

camel.source.endpoint.headerFilterStrategy

To use a custom HeaderFilterStrategy to filter header to and from Camel message.

null

false

MEDIUM

camel.source.endpoint.idleConsumerLimit

Specify the limit for the number of consumers that are allowed to be idle at any given time.

false

MEDIUM

camel.source.endpoint.idleTaskExecutionLimit

Specifies the limit for idle executions of a receive task, not having received any message within its execution. If this limit is reached, the task will shut down and leave receiving to other executing tasks (in the case of dynamic scheduling; see the maxConcurrentConsumers setting). There is additional doc available from Spring.

false

MEDIUM

camel.source.endpoint.includeAllJMSXProperties

Whether to include all JMSXxxx properties when mapping from JMS to Camel Message. Setting this to true will include properties such as JMSXAppID, and JMSXUserID etc. Note: If you are using a custom headerFilterStrategy then this option does not apply.

false

MEDIUM

camel.source.endpoint.jmsKeyFormatStrategy

Pluggable strategy for encoding and decoding JMS keys so they can be compliant with the JMS specification. Camel provides two implementations out of the box: default and passthrough. The default strategy will safely marshal dots and hyphens (. and -). The passthrough strategy leaves the key as is. Can be used for JMS brokers which do not care whether JMS header keys contain illegal characters. You can provide your own implementation of the org.apache.camel.component.jms.JmsKeyFormatStrategy and refer to it using the # notation. One of: [default] [passthrough]

null

false

MEDIUM

camel.source.endpoint.mapJmsMessage

Specifies whether Camel should auto map the received JMS message to a suited payload type, such as javax.jms.TextMessage to a String etc.

true

false

MEDIUM

camel.source.endpoint.maxMessagesPerTask

The number of messages per task. -1 is unlimited. If you use a range for concurrent consumers (eg min max), then this option can be used to set a value to eg 100 to control how fast the consumers will shrink when less work is required.

-1

false

MEDIUM

camel.source.endpoint.messageConverter

To use a custom Spring org.springframework.jms.support.converter.MessageConverter so you can be in control how to map to/from a javax.jms.Message.

null

false

MEDIUM

camel.source.endpoint.messageCreatedStrategy

To use the given MessageCreatedStrategy which are invoked when Camel creates new instances of javax.jms.Message objects when Camel is sending a JMS message.

null

false

MEDIUM

camel.source.endpoint.messageIdEnabled

When sending, specifies whether message IDs should be added. This is just an hint to the JMS broker. If the JMS provider accepts this hint, these messages must have the message ID set to null; if the provider ignores the hint, the message ID must be set to its normal unique value.

true

false

MEDIUM

camel.source.endpoint.messageListenerContainer Factory

Registry ID of the MessageListenerContainerFactory used to determine what org.springframework.jms.listener.AbstractMessageListenerContainer to use to consume messages. Setting this will automatically set consumerType to Custom.

null

false

MEDIUM

camel.source.endpoint.messageTimestampEnabled

Specifies whether timestamps should be enabled by default on sending messages. This is just an hint to the JMS broker. If the JMS provider accepts this hint, these messages must have the timestamp set to zero; if the provider ignores the hint the timestamp must be set to its normal value.

true

false

MEDIUM

camel.source.endpoint.pubSubNoLocal

Specifies whether to inhibit the delivery of messages published by its own connection.

false

MEDIUM

camel.source.endpoint.receiveTimeout

The timeout for receiving messages (in milliseconds).

1000L

false

MEDIUM

camel.source.endpoint.recoveryInterval

Specifies the interval between recovery attempts, i.e. when a connection is being refreshed, in milliseconds. The default is 5000 ms, that is, 5 seconds.

5000L

false

MEDIUM

camel.source.endpoint.requestTimeoutChecker Interval

Configures how often Camel should check for timed out Exchanges when doing request/reply over JMS. By default Camel checks once per second. But if you must react faster when a timeout occurs, then you can lower this interval, to check more frequently. The timeout is determined by the option requestTimeout.

1000L

false

MEDIUM

camel.source.endpoint.synchronous

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

MEDIUM

camel.source.endpoint.transferException

If enabled and you are using Request Reply messaging (InOut) and an Exchange failed on the consumer side, then the caused Exception will be send back in response as a javax.jms.ObjectMessage. If the client is Camel, the returned Exception is rethrown. This allows you to use Camel JMS as a bridge in your routing - for example, using persistent queues to enable robust routing. Notice that if you also have transferExchange enabled, this option takes precedence. The caught exception is required to be serializable. The original Exception on the consumer side can be wrapped in an outer exception such as org.apache.camel.RuntimeCamelException when returned to the producer. Use this with caution as the data is using Java Object serialization and requires the received to be able to deserialize the data at Class level, which forces a strong coupling between the producers and consumer!

false

MEDIUM

camel.source.endpoint.transferExchange

You can transfer the exchange over the wire instead of just the body and headers. The following fields are transferred: In body, Out body, Fault body, In headers, Out headers, Fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level. You must enable this option on both the producer and consumer side, so Camel knows the payloads is an Exchange and not a regular payload. Use this with caution as the data is using Java Object serialization and requires the received to be able to deserialize the data at Class level, which forces a strong coupling between the producers and consumer having to use compatible Camel versions!

false

MEDIUM

camel.source.endpoint.useMessageIDAsCorrelationID

Specifies whether JMSMessageID should always be used as JMSCorrelationID for InOut messages.

false

MEDIUM

camel.source.endpoint.waitForProvisionCorrelation ToBeUpdatedCounter

Number of times to wait for provisional correlation id to be updated to the actual correlation id when doing request/reply over JMS and when the option useMessageIDAsCorrelationID is enabled.

false

MEDIUM

camel.source.endpoint.waitForProvisionCorrelation ToBeUpdatedThreadSleepingTime

Interval in millis to sleep each time while waiting for provisional correlation id to be updated.

100L

false

MEDIUM

camel.source.endpoint.errorHandlerLoggingLevel

Allows to configure the default errorHandler logging level for logging uncaught exceptions. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]

"WARN"

false

MEDIUM

camel.source.endpoint.errorHandlerLogStackTrace

Allows to control whether stacktraces should be logged or not, by the default errorHandler.

true

false

MEDIUM

camel.source.endpoint.password

Password to use with the ConnectionFactory. You can also configure username/password directly on the ConnectionFactory.

null

false

MEDIUM

camel.source.endpoint.username

Username to use with the ConnectionFactory. You can also configure username/password directly on the ConnectionFactory.

null

false

MEDIUM

camel.source.endpoint.transacted

Specifies whether to use transacted mode

false

MEDIUM

camel.source.endpoint.transactedInOut

Specifies whether InOut operations (request reply) default to using transacted mode If this flag is set to true, then Spring JmsTemplate will have sessionTransacted set to true, and the acknowledgeMode as transacted on the JmsTemplate used for InOut operations. Note from Spring JMS: that within a JTA transaction, the parameters passed to createQueue, createTopic methods are not taken into account. Depending on the Java EE transaction context, the container makes its own decisions on these values. Analogously, these parameters are not taken into account within a locally managed transaction either, since Spring JMS operates on an existing JMS Session in this case. Setting this flag to true will use a short local JMS transaction when running outside of a managed transaction, and a synchronized local JMS transaction in case of a managed transaction (other than an XA transaction) being present. This has the effect of a local JMS transaction being managed alongside the main transaction (which might be a native JDBC transaction), with the JMS transaction committing right after the main transaction.

false

MEDIUM

camel.source.endpoint.lazyCreateTransactionManager

If true, Camel will create a JmsTransactionManager, if there is no transactionManager injected when option transacted=true.

true

false

MEDIUM

camel.source.endpoint.transactionManager

The Spring transaction manager to use.

null

false

MEDIUM

camel.source.endpoint.transactionName

The name of the transaction to use.

null

false

MEDIUM

camel.source.endpoint.transactionTimeout

The timeout value of the transaction (in seconds), if using transacted mode.

-1

false

MEDIUM

camel.component.activemq.brokerURL

Sets the broker URL to use to connect to ActiveMQ. If none configured then localhost:61616 is used by default (however can be overridden by configuration from environment variables)

null

false

MEDIUM

camel.component.activemq.clientId

null

false

MEDIUM

camel.component.activemq.connectionFactory

The connection factory to be use. A connection factory must be configured either on the component or endpoint.

null

false

MEDIUM

camel.component.activemq.disableReplyTo

false

MEDIUM

camel.component.activemq.durableSubscriptionName

The durable subscriber name for specifying durable topic subscriptions. The clientId option must be configured as well.

null

false

MEDIUM

camel.component.activemq.jmsMessageType

null

false

MEDIUM

camel.component.activemq.replyTo

Provides an explicit ReplyTo destination (overrides any incoming value of Message.getJMSReplyTo() in consumer).

null

false

MEDIUM

camel.component.activemq.testConnectionOnStartup

false

MEDIUM

camel.component.activemq.usePooledConnection

Enables or disables whether a PooledConnectionFactory will be used so that when messages are sent to ActiveMQ from outside of a message consuming thread, pooling will be used rather than the default with the Spring JmsTemplate which will create a new connection, session, producer for each message then close them all down again. The default value is true.

true

false

MEDIUM

camel.component.activemq.useSingleConnection

Enables or disables whether a Spring SingleConnectionFactory will be used so that when messages are sent to ActiveMQ from outside of a message consuming thread, pooling will be used rather than the default with the Spring JmsTemplate which will create a new connection, session, producer for each message then close them all down again. The default value is false and a pooled connection is used by default.

false

MEDIUM

camel.component.activemq.acknowledgementModeName

"AUTO_ACKNOWLEDGE"

false

MEDIUM

camel.component.activemq.asyncConsumer

false

MEDIUM

camel.component.activemq.autoStartup

Specifies whether the consumer container should auto-startup.

true

false

MEDIUM

camel.component.activemq.cacheLevel

Sets the cache level by ID for the underlying JMS resources. See cacheLevelName option for more details.

null

false

MEDIUM

camel.component.activemq.cacheLevelName

"CACHE_AUTO"

false

MEDIUM

camel.component.activemq.concurrentConsumers

false

MEDIUM

camel.component.activemq.maxConcurrentConsumers

null

false

MEDIUM

camel.component.activemq.replyToDeliveryPersistent

Specifies whether to use persistent delivery by default for replies.

true

false

MEDIUM

camel.component.activemq.selector

Sets the JMS selector to use

null

false

MEDIUM

camel.component.activemq.subscriptionDurable

false

MEDIUM

camel.component.activemq.subscriptionName

null

false

MEDIUM

camel.component.activemq.subscriptionShared

false

MEDIUM

camel.component.activemq.acceptMessagesWhile Stopping

false

MEDIUM

camel.component.activemq.allowReplyManagerQuick Stop

false

MEDIUM

camel.component.activemq.consumerType

"Default"

false

MEDIUM

camel.component.activemq.defaultTaskExecutorType

null

false

MEDIUM

camel.component.activemq.eagerLoadingOfProperties

false

MEDIUM

camel.component.activemq.eagerPoisonBody

"Poison JMS message due to ${exception.message}"

false

MEDIUM

camel.component.activemq.exposeListenerSession

Specifies whether the listener session should be exposed when consuming messages.

false

MEDIUM

camel.component.activemq.replyToSameDestination Allowed

false

MEDIUM

camel.component.activemq.taskExecutor

Allows you to specify a custom task executor for consuming messages.

null

false

MEDIUM

camel.component.activemq.allowAutoWiredConnection Factory

Whether to auto-discover ConnectionFactory from the registry, if no connection factory has been configured. If only one instance of ConnectionFactory is found then it will be used. This is enabled by default.

true

false

MEDIUM

camel.component.activemq.allowAutoWiredDestination Resolver

Whether to auto-discover DestinationResolver from the registry, if no destination resolver has been configured. If only one instance of DestinationResolver is found then it will be used. This is enabled by default.

true

false

MEDIUM

camel.component.activemq.allowSerializedHeaders

false

MEDIUM

camel.component.activemq.artemisStreamingEnabled

Whether optimizing for Apache Artemis streaming mode.

true

false

MEDIUM

camel.component.activemq.asyncStartListener

false

MEDIUM

camel.component.activemq.asyncStopListener

Whether to stop the JmsConsumer message listener asynchronously, when stopping a route.

false

MEDIUM

camel.component.activemq.basicPropertyBinding

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

LOW

camel.component.activemq.configuration

To use a shared JMS configuration

null

false

MEDIUM

camel.component.activemq.destinationResolver

A pluggable org.springframework.jms.support.destination.DestinationResolver that allows you to use your own resolver (for example, to lookup the real destination in a JNDI registry).

null

false

MEDIUM

camel.component.activemq.errorHandler

null

false

MEDIUM

camel.component.activemq.exceptionListener

Specifies the JMS Exception Listener that is to be notified of any underlying JMS exceptions.

null

false

MEDIUM

camel.component.activemq.idleConsumerLimit

Specify the limit for the number of consumers that are allowed to be idle at any given time.

false

MEDIUM

camel.component.activemq.idleTaskExecutionLimit

false

MEDIUM

camel.component.activemq.includeAllJMSXProperties

false

MEDIUM

camel.component.activemq.jmsKeyFormatStrategy

null

false

MEDIUM

camel.component.activemq.mapJmsMessage

Specifies whether Camel should auto map the received JMS message to a suited payload type, such as javax.jms.TextMessage to a String etc.

true

false

MEDIUM

camel.component.activemq.maxMessagesPerTask

-1

false

MEDIUM

camel.component.activemq.messageConverter

To use a custom Spring org.springframework.jms.support.converter.MessageConverter so you can be in control how to map to/from a javax.jms.Message.

null

false

MEDIUM

camel.component.activemq.messageCreatedStrategy

To use the given MessageCreatedStrategy which are invoked when Camel creates new instances of javax.jms.Message objects when Camel is sending a JMS message.

null

false

MEDIUM

camel.component.activemq.messageIdEnabled

true

false

MEDIUM

camel.component.activemq.messageListenerContainer Factory

null

false

MEDIUM

camel.component.activemq.messageTimestampEnabled

true

false

MEDIUM

camel.component.activemq.pubSubNoLocal

Specifies whether to inhibit the delivery of messages published by its own connection.

false

MEDIUM

camel.component.activemq.queueBrowseStrategy

To use a custom QueueBrowseStrategy when browsing queues

null

false

MEDIUM

camel.component.activemq.receiveTimeout

The timeout for receiving messages (in milliseconds).

1000L

false

MEDIUM

camel.component.activemq.recoveryInterval

Specifies the interval between recovery attempts, i.e. when a connection is being refreshed, in milliseconds. The default is 5000 ms, that is, 5 seconds.

5000L

false

MEDIUM

camel.component.activemq.requestTimeoutChecker Interval

1000L

false

MEDIUM

camel.component.activemq.transferException

false

MEDIUM

camel.component.activemq.transferExchange

false

MEDIUM

camel.component.activemq.trustAllPackages

Define if all Java packages are trusted or not (for Java object JMS message types). Notice its not recommended practice to send Java serialized objects over network. Setting this to true can expose security risks, so use this with care.

false

MEDIUM

camel.component.activemq.useMessageIDAs CorrelationID

Specifies whether JMSMessageID should always be used as JMSCorrelationID for InOut messages.

false

MEDIUM

camel.component.activemq.waitForProvision CorrelationToBeUpdatedCounter

Number of times to wait for provisional correlation id to be updated to the actual correlation id when doing request/reply over JMS and when the option useMessageIDAsCorrelationID is enabled.

false

MEDIUM

camel.component.activemq.waitForProvision CorrelationToBeUpdatedThreadSleepingTime

Interval in millis to sleep each time while waiting for provisional correlation id to be updated.

100L

false

MEDIUM

camel.component.activemq.headerFilterStrategy

To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter header to and from Camel message.

null

false

MEDIUM

camel.component.activemq.errorHandlerLoggingLevel

Allows to configure the default errorHandler logging level for logging uncaught exceptions. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]

"WARN"

false

MEDIUM

camel.component.activemq.errorHandlerLogStackTrace

Allows to control whether stacktraces should be logged or not, by the default errorHandler.

true

false

MEDIUM

camel.component.activemq.password

Password to use with the ConnectionFactory. You can also configure username/password directly on the ConnectionFactory.

null

false

MEDIUM

camel.component.activemq.username

Username to use with the ConnectionFactory. You can also configure username/password directly on the ConnectionFactory.

null

false

MEDIUM

camel.component.activemq.transacted

Specifies whether to use transacted mode

false

MEDIUM

camel.component.activemq.transactedInOut

false

MEDIUM

camel.component.activemq.lazyCreateTransaction Manager

If true, Camel will create a JmsTransactionManager, if there is no transactionManager injected when option transacted=true.

true

false

MEDIUM

camel.component.activemq.transactionManager

The Spring transaction manager to use.

null

false

MEDIUM

camel.component.activemq.transactionName

The name of the transaction to use.

null

false

MEDIUM

camel.component.activemq.transactionTimeout

The timeout value of the transaction (in seconds), if using transacted mode.

-1

false

MEDIUM

The camel-activemq sink connector has no converters out of the box.

The camel-activemq sink connector has no transforms out of the box.

The camel-activemq sink connector has no aggregation strategies out of the box.