camel-ganglia-kafka-connector sink configuration

When using camel-ganglia-kafka-connector as sink make sure to use the following Maven dependency to have support for the connector:

<dependency>
  <groupId>org.apache.camel.kafkaconnector</groupId>
  <artifactId>camel-ganglia-kafka-connector</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel Kafka connector version -->
</dependency>

To use this Sink connector in Kafka connect you’ll need to set the following connector.class

connector.class=org.apache.camel.kafkaconnector.ganglia.CamelGangliaSinkConnector

The camel-ganglia sink connector supports 32 options, which are listed below.

Name	Description	Default	Required	Priority
camel.sink.path.host	Host name for Ganglia server	"239.2.11.71"	false	MEDIUM
camel.sink.path.port	Port for Ganglia server	8649	false	MEDIUM
camel.sink.endpoint.dmax	Minumum time in seconds before Ganglia will purge the metric value if it expires. Set to 0 and the value will remain in Ganglia indefinitely until a gmond agent restart.	0	false	MEDIUM
camel.sink.endpoint.groupName	The group that the metric belongs to.	"java"	false	MEDIUM
camel.sink.endpoint.lazyStartProducer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	false	MEDIUM
camel.sink.endpoint.metricName	The name to use for the metric.	"metric"	false	MEDIUM
camel.sink.endpoint.mode	Send the UDP metric packets using MULTICAST or UNICAST One of: [MULTICAST] [UNICAST]	"MULTICAST"	false	MEDIUM
camel.sink.endpoint.prefix	Prefix the metric name with this string and an underscore.	null	false	MEDIUM
camel.sink.endpoint.slope	The slope One of: [ZERO] [POSITIVE] [NEGATIVE] [BOTH]	"BOTH"	false	MEDIUM
camel.sink.endpoint.spoofHostname	Spoofing information IP:hostname	null	false	MEDIUM
camel.sink.endpoint.tmax	Maximum time in seconds that the value can be considered current. After this, Ganglia considers the value to have expired.	60	false	MEDIUM
camel.sink.endpoint.ttl	If using multicast, set the TTL of the packets	5	false	MEDIUM
camel.sink.endpoint.type	The type of value One of: [STRING] [INT8] [UINT8] [INT16] [UINT16] [INT32] [UINT32] [FLOAT] [DOUBLE]	"STRING"	false	MEDIUM
camel.sink.endpoint.units	Any unit of measurement that qualifies the metric, e.g. widgets, litres, bytes. Do not include a prefix such as k (kilo) or m (milli), other tools may scale the units later. The value should be unscaled.	null	false	MEDIUM
camel.sink.endpoint.wireFormat31x	Use the wire format of Ganglia 3.1.0 and later versions. Set this to false to use Ganglia 3.0.x or earlier.	true	false	MEDIUM
camel.sink.endpoint.basicPropertyBinding	Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	false	MEDIUM
camel.sink.endpoint.synchronous	Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).	false	false	MEDIUM
camel.component.ganglia.dmax	Minumum time in seconds before Ganglia will purge the metric value if it expires. Set to 0 and the value will remain in Ganglia indefinitely until a gmond agent restart.	0	false	MEDIUM
camel.component.ganglia.groupName	The group that the metric belongs to.	"java"	false	MEDIUM
camel.component.ganglia.lazyStartProducer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	false	MEDIUM
camel.component.ganglia.metricName	The name to use for the metric.	"metric"	false	MEDIUM
camel.component.ganglia.mode	Send the UDP metric packets using MULTICAST or UNICAST One of: [MULTICAST] [UNICAST]	"MULTICAST"	false	MEDIUM
camel.component.ganglia.prefix	Prefix the metric name with this string and an underscore.	null	false	MEDIUM
camel.component.ganglia.slope	The slope One of: [ZERO] [POSITIVE] [NEGATIVE] [BOTH]	"BOTH"	false	MEDIUM
camel.component.ganglia.spoofHostname	Spoofing information IP:hostname	null	false	MEDIUM
camel.component.ganglia.tmax	Maximum time in seconds that the value can be considered current. After this, Ganglia considers the value to have expired.	60	false	MEDIUM
camel.component.ganglia.ttl	If using multicast, set the TTL of the packets	5	false	MEDIUM
camel.component.ganglia.type	The type of value One of: [STRING] [INT8] [UINT8] [INT16] [UINT16] [INT32] [UINT32] [FLOAT] [DOUBLE]	"STRING"	false	MEDIUM
camel.component.ganglia.units	Any unit of measurement that qualifies the metric, e.g. widgets, litres, bytes. Do not include a prefix such as k (kilo) or m (milli), other tools may scale the units later. The value should be unscaled.	null	false	MEDIUM
camel.component.ganglia.wireFormat31x	Use the wire format of Ganglia 3.1.0 and later versions. Set this to false to use Ganglia 3.0.x or earlier.	true	false	MEDIUM
camel.component.ganglia.basicPropertyBinding	Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	false	LOW
camel.component.ganglia.configuration	To use the shared configuration	null	false	MEDIUM

Name

Description

Default

Required

Priority

camel.sink.path.host

Host name for Ganglia server

"239.2.11.71"

false

MEDIUM

camel.sink.path.port

Port for Ganglia server

8649

false

MEDIUM

camel.sink.endpoint.dmax

Minumum time in seconds before Ganglia will purge the metric value if it expires. Set to 0 and the value will remain in Ganglia indefinitely until a gmond agent restart.

false

MEDIUM

camel.sink.endpoint.groupName

The group that the metric belongs to.

"java"

false

MEDIUM

camel.sink.endpoint.lazyStartProducer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

MEDIUM

camel.sink.endpoint.metricName

The name to use for the metric.

"metric"

false

MEDIUM

camel.sink.endpoint.mode

Send the UDP metric packets using MULTICAST or UNICAST One of: [MULTICAST] [UNICAST]

"MULTICAST"

false

MEDIUM

camel.sink.endpoint.prefix

Prefix the metric name with this string and an underscore.

null

false

MEDIUM

camel.sink.endpoint.slope

The slope One of: [ZERO] [POSITIVE] [NEGATIVE] [BOTH]

"BOTH"

false

MEDIUM

camel.sink.endpoint.spoofHostname

Spoofing information IP:hostname

null

false

MEDIUM

camel.sink.endpoint.tmax

Maximum time in seconds that the value can be considered current. After this, Ganglia considers the value to have expired.

false

MEDIUM

camel.sink.endpoint.ttl

If using multicast, set the TTL of the packets

false

MEDIUM

camel.sink.endpoint.type

The type of value One of: [STRING] [INT8] [UINT8] [INT16] [UINT16] [INT32] [UINT32] [FLOAT] [DOUBLE]

"STRING"

false

MEDIUM

camel.sink.endpoint.units

Any unit of measurement that qualifies the metric, e.g. widgets, litres, bytes. Do not include a prefix such as k (kilo) or m (milli), other tools may scale the units later. The value should be unscaled.

null

false

MEDIUM

camel.sink.endpoint.wireFormat31x

Use the wire format of Ganglia 3.1.0 and later versions. Set this to false to use Ganglia 3.0.x or earlier.

true

false

MEDIUM

camel.sink.endpoint.basicPropertyBinding

Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.sink.endpoint.synchronous

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

MEDIUM

camel.component.ganglia.dmax

Minumum time in seconds before Ganglia will purge the metric value if it expires. Set to 0 and the value will remain in Ganglia indefinitely until a gmond agent restart.

false

MEDIUM

camel.component.ganglia.groupName

The group that the metric belongs to.

"java"

false

MEDIUM

camel.component.ganglia.lazyStartProducer

false

MEDIUM

camel.component.ganglia.metricName

The name to use for the metric.

"metric"

false

MEDIUM

camel.component.ganglia.mode

Send the UDP metric packets using MULTICAST or UNICAST One of: [MULTICAST] [UNICAST]

"MULTICAST"

false

MEDIUM

camel.component.ganglia.prefix

Prefix the metric name with this string and an underscore.

null

false

MEDIUM

camel.component.ganglia.slope

The slope One of: [ZERO] [POSITIVE] [NEGATIVE] [BOTH]

"BOTH"

false

MEDIUM

camel.component.ganglia.spoofHostname

Spoofing information IP:hostname

null

false

MEDIUM

camel.component.ganglia.tmax

Maximum time in seconds that the value can be considered current. After this, Ganglia considers the value to have expired.

false

MEDIUM

camel.component.ganglia.ttl

If using multicast, set the TTL of the packets

false

MEDIUM

camel.component.ganglia.type

The type of value One of: [STRING] [INT8] [UINT8] [INT16] [UINT16] [INT32] [UINT32] [FLOAT] [DOUBLE]

"STRING"

false

MEDIUM

camel.component.ganglia.units

null

false

MEDIUM

camel.component.ganglia.wireFormat31x

Use the wire format of Ganglia 3.1.0 and later versions. Set this to false to use Ganglia 3.0.x or earlier.

true

false

MEDIUM

camel.component.ganglia.basicPropertyBinding

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

LOW

camel.component.ganglia.configuration

To use the shared configuration

null

false

MEDIUM

The camel-ganglia sink connector has no converters out of the box.

The camel-ganglia sink connector has no transforms out of the box.

The camel-ganglia sink connector has no aggregation strategies out of the box.