camel-cxf-kafka-connector source configuration

When using camel-cxf-kafka-connector as source make sure to use the following Maven dependency to have support for the connector:

<dependency>
  <groupId>org.apache.camel.kafkaconnector</groupId>
  <artifactId>camel-cxf-kafka-connector</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel Kafka connector version -->
</dependency>

To use this Source connector in Kafka connect you’ll need to set the following connector.class

connector.class=org.apache.camel.kafkaconnector.cxf.CamelCxfSourceConnector

The camel-cxf source connector supports 36 options, which are listed below.

Name	Description	Default	Priority
camel.source.path.beanId	To lookup an existing configured CxfEndpoint. Must used bean: as prefix.	null	MEDIUM
camel.source.path.address	The service publish address.	null	MEDIUM
camel.source.endpoint.dataFormat	The data type messages supported by the CXF endpoint. One of: [PAYLOAD] [RAW] [MESSAGE] [CXF_MESSAGE] [POJO]	"POJO"	MEDIUM
camel.source.endpoint.wrappedStyle	The WSDL style that describes how parameters are represented in the SOAP body. If the value is false, CXF will chose the document-literal unwrapped style, If the value is true, CXF will chose the document-literal wrapped style	null	MEDIUM
camel.source.endpoint.bridgeErrorHandler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	MEDIUM
camel.source.endpoint.exceptionHandler	To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.	null	MEDIUM
camel.source.endpoint.exchangePattern	Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut]	null	MEDIUM
camel.source.endpoint.allowStreaming	This option controls whether the CXF component, when running in PAYLOAD mode, will DOM parse the incoming messages into DOM Elements or keep the payload as a javax.xml.transform.Source object that would allow streaming in some cases.	null	MEDIUM
camel.source.endpoint.basicPropertyBinding	Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	MEDIUM
camel.source.endpoint.bus	To use a custom configured CXF Bus.	null	MEDIUM
camel.source.endpoint.continuationTimeout	This option is used to set the CXF continuation timeout which could be used in CxfConsumer by default when the CXF server is using Jetty or Servlet transport.	30000L	MEDIUM
camel.source.endpoint.cxfBinding	To use a custom CxfBinding to control the binding between Camel Message and CXF Message.	null	MEDIUM
camel.source.endpoint.cxfConfigurer	This option could apply the implementation of org.apache.camel.component.cxf.CxfEndpointConfigurer which supports to configure the CXF endpoint in programmatic way. User can configure the CXF server and client by implementing configure{ServerClient} method of CxfEndpointConfigurer.	null	MEDIUM
camel.source.endpoint.defaultBus	Will set the default bus when CXF endpoint create a bus by itself	false	MEDIUM
camel.source.endpoint.headerFilterStrategy	To use a custom HeaderFilterStrategy to filter header to and from Camel message.	null	MEDIUM
camel.source.endpoint.mergeProtocolHeaders	Whether to merge protocol headers. If enabled then propagating headers between Camel and CXF becomes more consistent and similar. For more details see CAMEL-6393.	false	MEDIUM
camel.source.endpoint.mtomEnabled	To enable MTOM (attachments). This requires to use POJO or PAYLOAD data format mode.	false	MEDIUM
camel.source.endpoint.properties	To set additional CXF options using the key/value pairs from the Map. For example to turn on stacktraces in SOAP faults, properties.faultStackTraceEnabled=true	null	MEDIUM
camel.source.endpoint.skipPayloadMessagePartCheck	Sets whether SOAP message validation should be disabled.	false	MEDIUM
camel.source.endpoint.synchronous	Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).	false	MEDIUM
camel.source.endpoint.loggingFeatureEnabled	This option enables CXF Logging Feature which writes inbound and outbound SOAP messages to log.	false	MEDIUM
camel.source.endpoint.loggingSizeLimit	To limit the total size of number of bytes the logger will output when logging feature has been enabled and -1 for no limit.	49152	MEDIUM
camel.source.endpoint.skipFaultLogging	This option controls whether the PhaseInterceptorChain skips logging the Fault that it catches.	false	MEDIUM
camel.source.endpoint.password	This option is used to set the basic authentication information of password for the CXF client.	null	MEDIUM
camel.source.endpoint.username	This option is used to set the basic authentication information of username for the CXF client.	null	MEDIUM
camel.source.endpoint.bindingId	The bindingId for the service model to use.	null	MEDIUM
camel.source.endpoint.portName	The endpoint name this service is implementing, it maps to the wsdl:portname. In the format of ns:PORT_NAME where ns is a namespace prefix valid at this scope.	null	MEDIUM
camel.source.endpoint.publishedEndpointUrl	This option can override the endpointUrl that published from the WSDL which can be accessed with service address url plus wsd	null	MEDIUM
camel.source.endpoint.serviceClass	The class name of the SEI (Service Endpoint Interface) class which could have JSR181 annotation or not.	null	MEDIUM
camel.source.endpoint.serviceName	The service name this service is implementing, it maps to the wsdl:servicename.	null	MEDIUM
camel.source.endpoint.wsdlURL	The location of the WSDL. Can be on the classpath, file system, or be hosted remotely.	null	MEDIUM
camel.component.cxf.bridgeErrorHandler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	MEDIUM
camel.component.cxf.allowStreaming	This option controls whether the CXF component, when running in PAYLOAD mode, will DOM parse the incoming messages into DOM Elements or keep the payload as a javax.xml.transform.Source object that would allow streaming in some cases.	null	MEDIUM
camel.component.cxf.basicPropertyBinding	Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	MEDIUM
camel.component.cxf.headerFilterStrategy	To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter header to and from Camel message.	null	MEDIUM
camel.component.cxf.useGlobalSslContextParameters	Enable usage of global SSL context parameters.	false	MEDIUM

Name

Description

Default

Priority

camel.source.path.beanId

To lookup an existing configured CxfEndpoint. Must used bean: as prefix.

null

MEDIUM

camel.source.path.address

The service publish address.

null

MEDIUM

camel.source.endpoint.dataFormat

The data type messages supported by the CXF endpoint. One of: [PAYLOAD] [RAW] [MESSAGE] [CXF_MESSAGE] [POJO]

"POJO"

MEDIUM

camel.source.endpoint.wrappedStyle

The WSDL style that describes how parameters are represented in the SOAP body. If the value is false, CXF will chose the document-literal unwrapped style, If the value is true, CXF will chose the document-literal wrapped style

null

MEDIUM

camel.source.endpoint.bridgeErrorHandler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

MEDIUM

camel.source.endpoint.exceptionHandler

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

null

MEDIUM

camel.source.endpoint.exchangePattern

Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut]

null

MEDIUM

camel.source.endpoint.allowStreaming

This option controls whether the CXF component, when running in PAYLOAD mode, will DOM parse the incoming messages into DOM Elements or keep the payload as a javax.xml.transform.Source object that would allow streaming in some cases.

null

MEDIUM

camel.source.endpoint.basicPropertyBinding

Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.source.endpoint.bus

To use a custom configured CXF Bus.

null

MEDIUM

camel.source.endpoint.continuationTimeout

This option is used to set the CXF continuation timeout which could be used in CxfConsumer by default when the CXF server is using Jetty or Servlet transport.

30000L

MEDIUM

camel.source.endpoint.cxfBinding

To use a custom CxfBinding to control the binding between Camel Message and CXF Message.

null

MEDIUM

camel.source.endpoint.cxfConfigurer

This option could apply the implementation of org.apache.camel.component.cxf.CxfEndpointConfigurer which supports to configure the CXF endpoint in programmatic way. User can configure the CXF server and client by implementing configure{ServerClient} method of CxfEndpointConfigurer.

null

MEDIUM

camel.source.endpoint.defaultBus

Will set the default bus when CXF endpoint create a bus by itself

false

MEDIUM

camel.source.endpoint.headerFilterStrategy

To use a custom HeaderFilterStrategy to filter header to and from Camel message.

null

MEDIUM

camel.source.endpoint.mergeProtocolHeaders

Whether to merge protocol headers. If enabled then propagating headers between Camel and CXF becomes more consistent and similar. For more details see CAMEL-6393.

false

MEDIUM

camel.source.endpoint.mtomEnabled

To enable MTOM (attachments). This requires to use POJO or PAYLOAD data format mode.

false

MEDIUM

camel.source.endpoint.properties

To set additional CXF options using the key/value pairs from the Map. For example to turn on stacktraces in SOAP faults, properties.faultStackTraceEnabled=true

null

MEDIUM

camel.source.endpoint.skipPayloadMessagePartCheck

Sets whether SOAP message validation should be disabled.

false

MEDIUM

camel.source.endpoint.synchronous

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

MEDIUM

camel.source.endpoint.loggingFeatureEnabled

This option enables CXF Logging Feature which writes inbound and outbound SOAP messages to log.

false

MEDIUM

camel.source.endpoint.loggingSizeLimit

To limit the total size of number of bytes the logger will output when logging feature has been enabled and -1 for no limit.

49152

MEDIUM

camel.source.endpoint.skipFaultLogging

This option controls whether the PhaseInterceptorChain skips logging the Fault that it catches.

false

MEDIUM

camel.source.endpoint.password

This option is used to set the basic authentication information of password for the CXF client.

null

MEDIUM

camel.source.endpoint.username

This option is used to set the basic authentication information of username for the CXF client.

null

MEDIUM

camel.source.endpoint.bindingId

The bindingId for the service model to use.

null

MEDIUM

camel.source.endpoint.portName

The endpoint name this service is implementing, it maps to the wsdl:portname. In the format of ns:PORT_NAME where ns is a namespace prefix valid at this scope.

null

MEDIUM

camel.source.endpoint.publishedEndpointUrl

This option can override the endpointUrl that published from the WSDL which can be accessed with service address url plus wsd

null

MEDIUM

camel.source.endpoint.serviceClass

The class name of the SEI (Service Endpoint Interface) class which could have JSR181 annotation or not.

null

MEDIUM

camel.source.endpoint.serviceName

The service name this service is implementing, it maps to the wsdl:servicename.

null

MEDIUM

camel.source.endpoint.wsdlURL

The location of the WSDL. Can be on the classpath, file system, or be hosted remotely.

null

MEDIUM

camel.component.cxf.bridgeErrorHandler

false

MEDIUM

camel.component.cxf.allowStreaming

null

MEDIUM

camel.component.cxf.basicPropertyBinding

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.component.cxf.headerFilterStrategy

To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter header to and from Camel message.

null

MEDIUM

camel.component.cxf.useGlobalSslContextParameters

Enable usage of global SSL context parameters.

false

MEDIUM